Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Josephson compensating junction logic

C.J. Anderson

Published Mar 1, 1993• 0 citations
Publisher

Abstract

A Josephson superconducting quantum interference device (SQUID) digital logic family was developed that uses the R/sub nn/ region of a Josephson junction (JJ) to compensate for variations in where R/sub nn/ is the effective resistance of a JJ in the linear I-V region beyond the gap. The basic compensating junction logic (CJL) circuit is two 2-input-OR 1-2-1 interferometer isolators that, when switched, inject current into a 2-input-AND 1-2-1 interferometer. The R/sub nn/ region of several JJs is used in series with a resistor to set the current from the power supply to the 2-input-OR interferometers. The 2-input-AND interferometer is implemented with both current injection and magnetic coupling. The latch circuit uses both current injection and magnetic coupling design techniques to increase the range of I/sub O/, inductance, and resistance variation over which the latch will function correctly. Experimental measurements of CJL circuits are described.>

DOI
10.1109/77.233512

Related papers

Current-injection Josephson latch employing a single-flux quantum. I

J. Sone, Toshishige Yamada

A new current-injection Josephson latch employing a single-flux quantum is proposed. It has a master-slave circuit configuration and operates under ac power supply. In the circuit, data are stored as a circulating current in a superconducting loop consisting of a single junction and inductances. A two-junction interferometer gate directly coupled to the loop reads out the stored data. Dual-rail signals are generated from the read-out data by Josephson junctions and resister-coupled Josephson logic gates. The isolation between a master circuit and a slave circuit is realized using high-impedance states in the Josephson junctions. The circuit design and computer-simulation results on the circuit operation are described in this paper.

Journal of Applied Physics•May 1, 1986•2 citations

Thermal noise in digital Josephson devices

J.D. Feder, M. Klein, C.J. Anderson

A method of accurately estimating the I/sub 0/ (critical current) of a Josephson junction (JJ) with thermal noise was developed by measuring the effective thermal noise temperature of a JJ. The effective thermal noise temperature of various JJ devices was measured and calculated. The JJ devices evaluated included inductively and resistively coupled logic devices and JJ devices in the presence of various noise sources. The noise sources included room-temperature resistors, switched JJ devices, and JJ devices in the linear I-V region beyond the gap. The R/sub NN/ compensator is shown to result in a noise temperature of about 6 K at an interferometer. The addition of a shunt junction lessens the noise penalty introduced by the compensator. A switched isolation interferometer in a two-input AND gate contributes negligible noise at the injection device. It is also shown that bandwidth connections to room-temperature equipment result in very large excess noise and require special input and output circuits on the chip.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•4 citations

Complementary Josephson junction devices and circuits: a possible new approach to superconducting electronics

Esin Terzioglu, M. R. Beasley

We present a superconducting logic family whose operation relies on the availability of a current gain greater than one, based on the analogy to semiconductor complementary metal-oxide-semiconductor (CMOS) logic family. The Complementary Josephson Junction (CJJ) logic family utilizes two types of nonlatching devices: a conventional device and a complementary device. The conventional device has a finite critical current, and the complementary device has zero critical current with no input applied. When the input is high, the complementary device has a finite critical current, while the conventional device has zero critical current. The bias current can be steered between a branch with a complementary device and a branch with a conventional device performing logic (and memory) functions. We can also use a resistor as a load to a complementary device. We call this circuit topology the Resistor Complementary Josephson Junction (RCJJ) family. It is analogous to the semiconductor PMOS/resistor logic family. In this paper, we investigate methods of realizing complementary devices, and we present a preliminary analysis of speed, margins, and power dissipation in simple CJJ and RCJJ inverter circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 1998•105 citations

New SQUID gate and its implementation into logic circuits

Futoshi Furuta, S. Matsumoto, Hiroyuki Akaike +2 more

We propose non-latching gates based on Superconducting QUantum Interference Device (SQUID) and logic circuits based on it. The gate consists of a 3-junction-SQUID coupled with an RF-SQUID inductively. According to numerical simulation, the wide bias margin reached /spl plusmn/52%. Adopting the magnetic coupling to apply input signals, the fan-out larger than unity was obtained without reducing signal current level. These consequences enabled us to realize complicated logic functions using this gate, The gate delay was 4.5ps at Jc=10kA/cm/sup 2/. An EXOR gate composed of two gates had the bias margin of /spl plusmn/35% and the delay time of 12ps. The operation in non-latching mode is also suitable for digital circuits based on HTS junctions.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•4 citations

Implementation of new superconducting neural circuits using coupled SQUIDs

Yoshinao Mizugaki, Kensuke Nakajima, Yasuji Sawada +1 more

A novel superconducting neuron circuit and two types of variable synapses, which are based on superconducting quantum interferometer devices (SQUIDs), are presented. A neuron circuit with good input-output isolation and steep threshold characteristics is accomplished using a combination of a single-junction SQUID coupled to a double-junction SQUID. The quantum state of the single-junction SQUID represents the neuron state, and the output voltage of the double-junction SQUID, which is operated in a nonlatching mode with shunt resistors, is a sigmoid-shaped function of the input. Both variable synapse circuits are composed of multiple shunted double-junction SQUIDs. The first type changes its conductance value by using both superconducting and voltage states. The second variable synapse circuit changes its output current digitally by switching its bias currents. Besides numerical simulations of the circuit characteristics, we have fabricated superconducting neural chips in a Nb/AlO/sub x//Nb Josephson junction technology. The fundamental operation of each element and a 2-bit neural-based A/D converter have been successfully tested. A learning system with a variable synapse is also discussed.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1994•39 citations

Josephson Junctions

Daniel D. Stancil, Gregory T. Byrd

The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.

Wiley eBooks•Apr 5, 2022•0 citations
A Josephson superconducting quantum interference device (SQUID) digital logic family was developed that uses the R/sub nn/ region of a Josephson junction (JJ) to compensate for variations in where R/sub nn/ is the effective resistance of a JJ in the linear I-V region beyond the gap. The basic compensating junction logic (CJL) circuit is two 2-input-OR 1-2-1 interferometer isolators that, when switched, inject current into a 2-input-AND 1-2-1 interferometer. The R/sub nn/ region of several JJs is used in series with a resistor to set the current from the power supply to the 2-input-OR interferometers. The 2-input-AND interferometer is implemented with both current injection and magnetic coupling. The latch circuit uses both current injection and magnetic coupling design techniques to increase the range of I/sub O/, inductance, and resistance variation over which the latch will function correctly. Experimental measurements of CJL circuits are described.>
A new current-injection Josephson latch employing a single-flux quantum is proposed. It has a master-slave circuit configuration and operates under ac power supply. In the circuit, data are stored as a circulating current in a superconducting loop consisting of a single junction and inductances. A two-junction interferometer gate directly coupled to the loop reads out the stored data. Dual-rail signals are generated from the read-out data by Josephson junctions and resister-coupled Josephson logic gates. The isolation between a master circuit and a slave circuit is realized using high-impedance states in the Josephson junctions. The circuit design and computer-simulation results on the circuit operation are described in this paper.
A method of accurately estimating the I/sub 0/ (critical current) of a Josephson junction (JJ) with thermal noise was developed by measuring the effective thermal noise temperature of a JJ. The effective thermal noise temperature of various JJ devices was measured and calculated. The JJ devices evaluated included inductively and resistively coupled logic devices and JJ devices in the presence of various noise sources. The noise sources included room-temperature resistors, switched JJ devices, and JJ devices in the linear I-V region beyond the gap. The R/sub NN/ compensator is shown to result in a noise temperature of about 6 K at an interferometer. The addition of a shunt junction lessens the noise penalty introduced by the compensator. A switched isolation interferometer in a two-input AND gate contributes negligible noise at the injection device. It is also shown that bandwidth connections to room-temperature equipment result in very large excess noise and require special input and output circuits on the chip.>
We present a superconducting logic family whose operation relies on the availability of a current gain greater than one, based on the analogy to semiconductor complementary metal-oxide-semiconductor (CMOS) logic family. The Complementary Josephson Junction (CJJ) logic family utilizes two types of nonlatching devices: a conventional device and a complementary device. The conventional device has a finite critical current, and the complementary device has zero critical current with no input applied. When the input is high, the complementary device has a finite critical current, while the conventional device has zero critical current. The bias current can be steered between a branch with a complementary device and a branch with a conventional device performing logic (and memory) functions. We can also use a resistor as a load to a complementary device. We call this circuit topology the Resistor Complementary Josephson Junction (RCJJ) family. It is analogous to the semiconductor PMOS/resistor logic family. In this paper, we investigate methods of realizing complementary devices, and we present a preliminary analysis of speed, margins, and power dissipation in simple CJJ and RCJJ inverter circuits.
We propose non-latching gates based on Superconducting QUantum Interference Device (SQUID) and logic circuits based on it. The gate consists of a 3-junction-SQUID coupled with an RF-SQUID inductively. According to numerical simulation, the wide bias margin reached /spl plusmn/52%. Adopting the magnetic coupling to apply input signals, the fan-out larger than unity was obtained without reducing signal current level. These consequences enabled us to realize complicated logic functions using this gate, The gate delay was 4.5ps at Jc=10kA/cm/sup 2/. An EXOR gate composed of two gates had the bias margin of /spl plusmn/35% and the delay time of 12ps. The operation in non-latching mode is also suitable for digital circuits based on HTS junctions.
A novel superconducting neuron circuit and two types of variable synapses, which are based on superconducting quantum interferometer devices (SQUIDs), are presented. A neuron circuit with good input-output isolation and steep threshold characteristics is accomplished using a combination of a single-junction SQUID coupled to a double-junction SQUID. The quantum state of the single-junction SQUID represents the neuron state, and the output voltage of the double-junction SQUID, which is operated in a nonlatching mode with shunt resistors, is a sigmoid-shaped function of the input. Both variable synapse circuits are composed of multiple shunted double-junction SQUIDs. The first type changes its conductance value by using both superconducting and voltage states. The second variable synapse circuit changes its output current digitally by switching its bias currents. Besides numerical simulations of the circuit characteristics, we have fabricated superconducting neural chips in a Nb/AlO/sub x//Nb Josephson junction technology. The fundamental operation of each element and a 2-bit neural-based A/D converter have been successfully tested. A learning system with a variable synapse is also discussed.>
The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.