Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Comparison of simulation and experiment for a Josephson fluxonic diode

Farshid Raissi, J.E. Nordman

Published Jun 1, 1995• 12 citations
Publisher

Abstract

With a slight modification to the control line and its bias configuration, a long Josephson junction vortex flow transistor structure can become a so-called fluxonic diode containing fluxon and antifluxon "doped" regions in analogy to a pn junction. Such structures have been made with Nb-Pb tunnel junctions allowing testing of the same device with a number of different doping configurations. This paper compares experimental results with a one dimensional numerical simulation. Different configurations for the diode have been modeled with Stewart-McCumber loss parameters ranging between 50 and 1400. The simulation clarifies the origin of a number of experimental observations, including a peculiar dependence of resonance induced step behavior on loss parameter, and a limit to the value of the gradient of doping in the transition region below which an asymmetric I-V curve representing forward and reverse biases is obtained. In forward bias, the I-V curve above a threshold current is roughly linear and devoid of resonance structure, provided injection of carriers occurs from one region to the other. Injection is a function of loss and the asymmetry of doping.>

DOI
10.1109/77.403209

Related papers

Modeling of the josephson fluxonic diode

Farshid Raissi

A forward bias Josephson fluxonic diode exhibits a linear I-V curve whose slope is a function of the Stewart-McCumber loss parameter /spl beta/, the length of the junction, critical current density and the magnitude of the applied control current. This linear I-V curve lacks resonance structure and does not exhibit a flux flow step. A modeling which matches experimental results is presented.

IEEE Transactions on Applied Superconductivity•Sep 1, 2003•9 citations

Theory of operation of high temperature Josephson fluxon-antifluxon transistor

Esin Terzioglu, M. R. Beasley, Y. M. Zhang +1 more

We provide two qualitative models for the operation of Josephson fluxon–antifluxon transistor based on the pendulum model and image currents induced in the junction. This device, which is a variant of a Josephson vortex flow transistor, utilizes high temperature superconductor long Josephson junctions with a control line on top of the junction. Our models are consistent with the experimental observation that the coupling efficiency increases with this geometry. We also provide a quantitative model using numerical simulations to confirm the static and dynamic characteristics predicted by the intuitive models.

Journal of Applied Physics•Nov 1, 1996•3 citations

Dynamic Microwave Impedance of Dc-Biased Josephson Fluxonic Diode in the Presence of Magnetic Field and RF Drive

Hamed Mehrara, Farshid Raissi, Alireza Erfanian +2 more

Josephson Fluxonic Diode (JFD) provides a very nonlinear characteristic in comparison with a long Josephson junction at microwave frequencies. This nonlinearity is highly accentuated by creation and dynamics of vortex-antivortex pairs in two disparate modes of operation; forward and reverse-bias. Experimental detection of microwave frequencies through this device is not solely dependent on the geometry and seems to change drastically with the different operating condition. This paper attempts to understand the microwave characteristic of this device with respect to its bias and control current and rf-exposed boundary conditions defined in RCSJ model of JFD. Based on the simulation results, for a finite length of a JFD excited by a low-amplitude microwave signal below its plasma frequency, control current increases the rate of vortex-antivortex pair generation and fine-tunes the microwave resistance (Rω) up to an order of magnitude more than its zero magnetic field resistance (R0). Under this circumstance, adding the bias current which can move generated vortex-antivortex pairs causes a substantial increase up to three orders of magnitude compared to R0either in forward or reverse-bias, while damping coefficient 1/√βc(βcis Stewart-McCumber parameter of Josephson junction) can limit this increase. It has also been shown that the variation of polarity, frequency, or amplitude of incoming microwave signal can impact on the impedance due to its relation with pair generation rate and so causes variations in observed impedance both in linear and nonlinear form. According to the results, low-microwave impedance of a JFD can be multiplied externally using biasing sets to match with high-impedance sources, which justifies its detection mechanism at microwave frequency.

arXiv:1709.06595•IEEE Transactions on Applied Superconductivity•Feb 22, 2018•3 citations

Long Josephson junction embedded into a planar resonator at microwave frequencies: Numerical simulation of fluxon dynamics

E. Goldobin, Alexander M. Klushin, M. Siegel +1 more

We have investigated numerically a system consisting of a long Josephson junction embedded into a microstrip resonator. For such a configuration the Josephson vortex dynamics in the junction is driven by the oscillating currents in the resonator. We have calculated the complex impedance of the junction at the resonant frequency. The Q factor of the resonator and the change of the resonant frequency of the whole system can then be easily calculated knowing the parameters of the resonator without Josephson junction. The fluxon dynamics and the complex impedance of the junction are simulated for different values of the junction length, damping, dc bias current, and dc magnetic field. This allows us to explain the behavior of the impedance of the junction and different loss mechanisms. In particular, we predict a nonmonotonic dependence of the both real and imaginary parts of the impedance on the amplitude of the oscillating current in the resonator for some range of parameters. Our results show that such a combination of active and passive superconducting elements forms a rather interesting nonlinear physical system which might be useful for development of tunable/switchable superconducting resonators and suggests an experimental technique for detecting trapped vortices in long junctions.

Journal of Applied Physics•Aug 30, 2002•6 citations

Josephson Fluxonic Bipolar Junction Transistor

Farshid Raissi

Josephson fluxonic bipolar junction transistor (JFBJT) has been proposed as a superconducting amplifying element. The results on a simple realization of this device are provided to demonstrate its working principle. These experiments demonstrate that JFBJT provides current gain without suffering from the problems associated with the regular long junction vortex flow transistors. In particular, no resonance structure is present in its I-V characteristics and its impedance can be matched to any load without degradation of its characteristics. Suggestion is made on how a practical device can be fabricated.

IEEE Transactions on Applied Superconductivity•Mar 1, 2004•7 citations

Optimization of high-T/sub c/ Josephson fluxon-antifluxon transistors based on numerical simulation

Y.M. Zhang, Esin Terzioglu, M. R. Beasley

A Josephson fluxon-antifluxon transistor (JFAT) can be constructed utilizing high-T/sub c/ bicrystal or SNS long junctions with a control line on top of the junction, This device can be modeled numerically by solving the perturbed sine-Gordon equation. A JFAT has a higher current gain and a faster transient response compared to a conventional Josephson flux-flow transistor which has a U-shaped control line on top of the long junction. Dependences of the control characteristics on the width and the location of the control line, as well as on the junction length are calculated. The influence of a superconducting ground plane on device characteristics are also discussed. These results are important to the design of high-T/sub c/ digital circuits based on JFATs.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•0 citations
With a slight modification to the control line and its bias configuration, a long Josephson junction vortex flow transistor structure can become a so-called fluxonic diode containing fluxon and antifluxon "doped" regions in analogy to a pn junction. Such structures have been made with Nb-Pb tunnel junctions allowing testing of the same device with a number of different doping configurations. This paper compares experimental results with a one dimensional numerical simulation. Different configurations for the diode have been modeled with Stewart-McCumber loss parameters ranging between 50 and 1400. The simulation clarifies the origin of a number of experimental observations, including a peculiar dependence of resonance induced step behavior on loss parameter, and a limit to the value of the gradient of doping in the transition region below which an asymmetric I-V curve representing forward and reverse biases is obtained. In forward bias, the I-V curve above a threshold current is roughly linear and devoid of resonance structure, provided injection of carriers occurs from one region to the other. Injection is a function of loss and the asymmetry of doping.>
We provide two qualitative models for the operation of Josephson fluxon–antifluxon transistor based on the pendulum model and image currents induced in the junction. This device, which is a variant of a Josephson vortex flow transistor, utilizes high temperature superconductor long Josephson junctions with a control line on top of the junction. Our models are consistent with the experimental observation that the coupling efficiency increases with this geometry. We also provide a quantitative model using numerical simulations to confirm the static and dynamic characteristics predicted by the intuitive models.
Josephson Fluxonic Diode (JFD) provides a very nonlinear characteristic in comparison with a long Josephson junction at microwave frequencies. This nonlinearity is highly accentuated by creation and dynamics of vortex-antivortex pairs in two disparate modes of operation; forward and reverse-bias. Experimental detection of microwave frequencies through this device is not solely dependent on the geometry and seems to change drastically with the different operating condition. This paper attempts to understand the microwave characteristic of this device with respect to its bias and control current and rf-exposed boundary conditions defined in RCSJ model of JFD. Based on the simulation results, for a finite length of a JFD excited by a low-amplitude microwave signal below its plasma frequency, control current increases the rate of vortex-antivortex pair generation and fine-tunes the microwave resistance (Rω) up to an order of magnitude more than its zero magnetic field resistance (R0). Under this circumstance, adding the bias current which can move generated vortex-antivortex pairs causes a substantial increase up to three orders of magnitude compared to R0either in forward or reverse-bias, while damping coefficient 1/√βc(βcis Stewart-McCumber parameter of Josephson junction) can limit this increase. It has also been shown that the variation of polarity, frequency, or amplitude of incoming microwave signal can impact on the impedance due to its relation with pair generation rate and so causes variations in observed impedance both in linear and nonlinear form. According to the results, low-microwave impedance of a JFD can be multiplied externally using biasing sets to match with high-impedance sources, which justifies its detection mechanism at microwave frequency.
We have investigated numerically a system consisting of a long Josephson junction embedded into a microstrip resonator. For such a configuration the Josephson vortex dynamics in the junction is driven by the oscillating currents in the resonator. We have calculated the complex impedance of the junction at the resonant frequency. The Q factor of the resonator and the change of the resonant frequency of the whole system can then be easily calculated knowing the parameters of the resonator without Josephson junction. The fluxon dynamics and the complex impedance of the junction are simulated for different values of the junction length, damping, dc bias current, and dc magnetic field. This allows us to explain the behavior of the impedance of the junction and different loss mechanisms. In particular, we predict a nonmonotonic dependence of the both real and imaginary parts of the impedance on the amplitude of the oscillating current in the resonator for some range of parameters. Our results show that such a combination of active and passive superconducting elements forms a rather interesting nonlinear physical system which might be useful for development of tunable/switchable superconducting resonators and suggests an experimental technique for detecting trapped vortices in long junctions.
Josephson fluxonic bipolar junction transistor (JFBJT) has been proposed as a superconducting amplifying element. The results on a simple realization of this device are provided to demonstrate its working principle. These experiments demonstrate that JFBJT provides current gain without suffering from the problems associated with the regular long junction vortex flow transistors. In particular, no resonance structure is present in its I-V characteristics and its impedance can be matched to any load without degradation of its characteristics. Suggestion is made on how a practical device can be fabricated.
A Josephson fluxon-antifluxon transistor (JFAT) can be constructed utilizing high-T/sub c/ bicrystal or SNS long junctions with a control line on top of the junction, This device can be modeled numerically by solving the perturbed sine-Gordon equation. A JFAT has a higher current gain and a faster transient response compared to a conventional Josephson flux-flow transistor which has a U-shaped control line on top of the long junction. Dependences of the control characteristics on the width and the location of the control line, as well as on the junction length are calculated. The influence of a superconducting ground plane on device characteristics are also discussed. These results are important to the design of high-T/sub c/ digital circuits based on JFATs.