Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Photonics Technology Letters

Optical Bistable Operations in AlGaAs-Based Photonic Crystal Slab Microcavity at Telecommunication Wavelengths

Yu Tanaka, H. Kawashi, Naoki Ikeda, Yoshimasa Sugimoto, Haruhiko Kuwatsuka, Toshifumi Hasama, H. Ishikawa

Published Sep 13, 2006• 16 citations
Publisher

Abstract

We report on bistable operations in a microcavity formed on an AlGaAs-based photonic crystal slab at telecommunication wavelengths. We designed the cavity to achieve a high quality ($Q$)-factor, while maintaining a small mode volume; this was accomplished by removal of a single air hole. The fabricated microcavity exhibited a resonant peak with a$Q$-factor of 1900 at 1548 nm. In nonlinear transmission measurement, when the input power was increased, a bistable characteristic which was dependent on the detuned wavelength from the resonance was observed. The bistability was considered to originate from thermal nonlinearity due to two-photon absorption.

DOI
10.1109/lpt.2006.882305

Related papers

AlGaAs-based photonic crystal microcavity and its optical bistability

Hitoshi Kawashima, Naoki Ikeda, Yoshimasa Sugimoto +3 more

Optical microcavity was fabricated in an AlGaAs-based photonic crystal slab. The optical resonance was within the communication wavelengths and had a quality factor of 1900. Optical bistability due to thermo-optic origin was observed.

Conference on Lasers and Electro-Optics•Jan 1, 2006•0 citations

Optical Bistable Operations in AlGaAs-based Photonic Crystal Slab Microcavity

Yu Tanaka, Hitoshi Kawashima, Naoki Ikeda +4 more

We fabricated a microcavity on AlGaAs-based photonic crystal slab. Bistable responses of the resonant peak were achieved with input power less than 1 mW in optical communication band for future optical switch and memory applications.

European Conference on Optical Communication•Sep 1, 2006•0 citations

All-Optical Bistability in Photonic Crystal Resonators based on InGaAsP Quantum-Wells

Myung‐Ki Kim, In-Kag Hwang, Yong-hee Lee

We demonstrate extremely low-power all-optical bistability by using photonic crystal linear resonators based on InGaAsP quantum-wells. Since the photonic crystal cavity has a high quality-factor and a small mode-volume, the photon density in the cavity is extremely high, which makes it possible to reduce the bistable power. The measured minimum bistable threshold power was 37 muW by using a fiber coupling technique, and the estimated nonlinear refractive index (n2) was -6.84times10-14m2/W at a wavelength of 1610.8 nm which is near the resonant wavelength of quantum-well. The low-power optical bistable operations in a single photonic crystal cavity open the possibility of integrated optical devices such as an all-optical memory and switch, based on photonic crystals

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Oct 1, 2006•4 citations

Optical Bistable Response in AlGaAs-Based Photonic Crystal Microcavities and Related Nonlinearities

Hitoshi Kawashima, Yu Tanaka, Naoki Ikeda +3 more

Optical bistable responses in AlGaAs-based photonic crystal cavities with Al fractions of 0.16 and 0.27 under a stationary condition are studied. An analysis of the experimental results with a one-dimensional etalon model indicates that the bistable response is primarily driven by optical nonlinearities that stem from a heat generation in two-photon absorption and in free-carrier absorption. A free-carrier plasma effect is not influential, which is a major difference from the case of Si photonic crystal cavities. The accumulation of heat enables the phase or index to significantly change. An estimate indicates that a high$Q$-factor is advantageous for driving bistability exclusively by the Kerr effect.

IEEE Journal of Quantum Electronics•Jul 24, 2008•17 citations

Enhanced optical bistability in slotted photonic crystal structure for microwave frequency generation

Akash Kumar Pradhan, Chandra Prakash, Sambit Satpathy +1 more

This study proposes a novel silicon nanocrystal SiNC/SiO[Formula: see text] embedded slotted photonic crystal nanocavity employing precise width modulation to explore optical bistability and self-pulsing behavior for microwave signal generation. The designed cavity achieves an ultra-high quality factor (Q) of [Formula: see text] and a low modal volume of [Formula: see text]. Theoretical modeling incorporating Kerr nonlinearity, two-photon absorption, and free carrier effects is used to analyze the bistability response. Simulation results reveal a low threshold power of [Formula: see text] for optical bistability under a - 20 pm detuning condition. Additionally, the cavity demonstrates microwave frequency generation through self-pulsing oscillations, with a fundamental mode and observable second harmonic at 21.34 GHz. Fabrication tolerance is also evaluated, showing that the design sustains performance with up to 9% randomness in hole radii, 12% in x-position, and 20% in z-position of air holes. These findings confirm the feasibility of the proposed structure for low-power, high-frequency integrated photonic applications.

Scientific Reports•Nov 11, 2025•2 citations

Controllable optical bistability in photonic-crystal one-atom laser

Xiaoyong Guo, Shuchen Lü

We investigate the property of optical bistability in a photonic-crystal one-atom laser when nonlinear microcavity is present. The physical system consists of a coherently driven two-level light emitter strongly coupled to a high-quality microcavity which is embedded within a photonic crystal and another coherent probing field which has incident into the microcavity. In our case, the microcavity is fabricated by nonlinear material and placed as an impurity in photonic crystal. This study reveals that such a system can exhibit optical bistability. The dependence of threshold value and hysteresis loop on the photonic band gap of the photonic crystal, driving field Rabi frequency and dephasing processes, are studied. Our results clearly illustrate the ability to control optical bistability through suitable photonic-crystal architectures and external coherent driving field, and this study suggests that in a photonic-crystal nonlinear microcavity, the one-atom laser acts as an effective controllable bistable device in the design of all-light digital computing systems in the near future.

Physical Review A•Oct 21, 2009•18 citations
We report on bistable operations in a microcavity formed on an AlGaAs-based photonic crystal slab at telecommunication wavelengths. We designed the cavity to achieve a high quality (QQQ)-factor, while maintaining a small mode volume; this was accomplished by removal of a single air hole. The fabricated microcavity exhibited a resonant peak with aQQQ-factor of 1900 at 1548 nm. In nonlinear transmission measurement, when the input power was increased, a bistable characteristic which was dependent on the detuned wavelength from the resonance was observed. The bistability was considered to originate from thermal nonlinearity due to two-photon absorption.
We demonstrate extremely low-power all-optical bistability by using photonic crystal linear resonators based on InGaAsP quantum-wells. Since the photonic crystal cavity has a high quality-factor and a small mode-volume, the photon density in the cavity is extremely high, which makes it possible to reduce the bistable power. The measured minimum bistable threshold power was 37 muW by using a fiber coupling technique, and the estimated nonlinear refractive index (n2) was -6.84times10-14m2/W at a wavelength of 1610.8 nm which is near the resonant wavelength of quantum-well. The low-power optical bistable operations in a single photonic crystal cavity open the possibility of integrated optical devices such as an all-optical memory and switch, based on photonic crystals
Optical bistable responses in AlGaAs-based photonic crystal cavities with Al fractions of 0.16 and 0.27 under a stationary condition are studied. An analysis of the experimental results with a one-dimensional etalon model indicates that the bistable response is primarily driven by optical nonlinearities that stem from a heat generation in two-photon absorption and in free-carrier absorption. A free-carrier plasma effect is not influential, which is a major difference from the case of Si photonic crystal cavities. The accumulation of heat enables the phase or index to significantly change. An estimate indicates that a highQQQ-factor is advantageous for driving bistability exclusively by the Kerr effect.
This study proposes a novel silicon nanocrystal SiNC/SiO[Formula: see text] embedded slotted photonic crystal nanocavity employing precise width modulation to explore optical bistability and self-pulsing behavior for microwave signal generation. The designed cavity achieves an ultra-high quality factor (Q) of [Formula: see text] and a low modal volume of [Formula: see text]. Theoretical modeling incorporating Kerr nonlinearity, two-photon absorption, and free carrier effects is used to analyze the bistability response. Simulation results reveal a low threshold power of [Formula: see text] for optical bistability under a - 20 pm detuning condition. Additionally, the cavity demonstrates microwave frequency generation through self-pulsing oscillations, with a fundamental mode and observable second harmonic at 21.34 GHz. Fabrication tolerance is also evaluated, showing that the design sustains performance with up to 9% randomness in hole radii, 12% in x-position, and 20% in z-position of air holes. These findings confirm the feasibility of the proposed structure for low-power, high-frequency integrated photonic applications.
We investigate the property of optical bistability in a photonic-crystal one-atom laser when nonlinear microcavity is present. The physical system consists of a coherently driven two-level light emitter strongly coupled to a high-quality microcavity which is embedded within a photonic crystal and another coherent probing field which has incident into the microcavity. In our case, the microcavity is fabricated by nonlinear material and placed as an impurity in photonic crystal. This study reveals that such a system can exhibit optical bistability. The dependence of threshold value and hysteresis loop on the photonic band gap of the photonic crystal, driving field Rabi frequency and dephasing processes, are studied. Our results clearly illustrate the ability to control optical bistability through suitable photonic-crystal architectures and external coherent driving field, and this study suggests that in a photonic-crystal nonlinear microcavity, the one-atom laser acts as an effective controllable bistable device in the design of all-light digital computing systems in the near future.