Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Experimental and Theoretical Physics

Efficient loading of a Rb dark magneto-optical trap by controlling current through a getter source

S. Singh, Vibhuti Bhushan Tiwari, H. S. Rawat

Published Sep 1, 2010• 2 citations
Publisher

Abstract

We report a study on the loading of a Rb dark magneto-optical trap from a current-controlled getter source. The effect of changing the temperature and number density of the background atoms on the cold atomic population in the dark state has been investigated by passing current of different magnitudes through the getter source. We observe that the dark state collection rate of the cold atoms is maximized for an optimum value of the getter current used. In our experiments, cold atoms in the dark state have been collected with the maximum collection rate 3.6 × 10 7 atoms/s and background atom collision rate γ = 1.9 ± 0.2 s −1 for the getter current ∼4 A.

DOI
10.1134/s1063776110090050

Related papers

Loading of a Rb magneto-optic trap from a getter source

Umakant D. Rapol, Ajay Wasan, Vasant Natarajan A

We study the properties of a Rb magneto-optic trap loaded from a commercial getter source. The source provides a large flux of atoms for the trap along with the capability of rapid turn off necessary for obtaining long trap lifetimes. We have studied the trap loading at two different values of background pressure to determine the cross section for $\mathrm{Rb}\ensuremath{-}{\mathrm{N}}_{2}$ collisions to be $3.5(4)\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}14}{\mathrm{cm}}^{2}$ and that for Rb-Rb collisions to be of order $3\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}13}{\mathrm{cm}}^{2}$. At a background pressure of $1.3\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}$ torr, we load more than ${10}^{8}$ atoms into the trap with a time constant of 3.3 s. The $1/e$ lifetime of trapped atoms is 13 s limited only by background collisions.

arXiv:physics/0204022•Physical Review A•Jun 28, 2001•54 citations

Experiments with atoms captured in a dark light trap

Joffe, Kendall B. Davis, Wolfgang Ketterle

Sodium atoms have been loaded from a slowed beam into a dark magneto-optical trap which confines atoms mostly in the non-absorbing F=1 ground state. This method has allowed us to achieve samples of more than 10{sup 10} atoms with optical densities in excess of 150. Temperatures around 1.2 mK and densities around 10{sup 12} cm{sup -3} have been measured using weak probe absorption. At this density an elastic collisions rate is already approximately 100 Hz. Our goal is to reach the regime where the rate is high enough to allow evaporative cooling of the trapped sample enroute to Bose-Einstein Condensation, for which yet higher densities and lower temperatures are required. We report the current status of experiments underway to further increase the phase space density of the trapped atoms by cooling with polarization-gradient molasses and reloading them into a magnetic trap with a spherical quandrupole field.

Bulletin of the American Physical Society•May 1, 1993•0 citations

Laser cooling and trapping of atoms

G., T, C. G. Townsend

A detailed experimental and theoretical investigation of a magneto-optical trap for caesium atoms is presented. Particular emphasis has been placed on achieving high spatial number densities and low temperatures. Optimizing both of these together enables efficient evaporative cooling from a conservative trap, a procedure which has recently led to the first observations of Bose-Einstein condensation in a dilute atomic vapour. The behaviour of a magneto-optical trap is nominally determined by four independent parameters: the detuning and intensity of the light field, the magnetic field gradient and the number of trapped atoms. A model is presented which incorporates previous treatments into a single description of the trap that encompasses a wide range of its behaviour. This model was tested quantitatively by measuring the temperature of the cloud and its spatial distribution as a function of the four parameters. The maximum density was found to be limited both by the reabsorption of photons scattered within the cloud and by a reduction of the confining force at small light shifts. The nonlinear variation with position of the restoring force was found to be significant in limiting the number of atoms confined to a high density. A maximum density in phase space (defined as the number of atoms in a box with sides of dimension one thermal de Broglie wavelength) of (1.5 ± 0.5) x 10-5 was observed, with a spatial density of 1.5 x 1011 atoms per cm3. Cold collision losses from a caesium magneto-optical trap have been studied with the purpose of assessing their influence on spatial densities. In contrast to previous measurements of similar quantities, these measurements did not require the use of an ultra-low (< 10-10 Torr) background vapour pressure. The dependence of the cold collision loss coefficient β on the trapping intensity was measured to permit identification of the different cold collision processes. The largest loss rates observed were those due to hyperfine structure-changing collisions, with a coefficient β = (2±1) x 10-10cm3s-1. A study is presented of a modified magneto-optical trap in which a fraction of the population is shelved into a hyperfine level that does not interact with the trapping light. In this so-called "dark" magneto-optical trap, improved densities of nearly 1012cm-3 have been previously reported for sodium. The application of the technique to caesium is not straightforward due to the larger excited state hyperfine splittings. A simple theory for caesium is presented and its main predictions verified by measurements of density, number and temperature. A density of nearly 1012cm,-3 was indeed obtained but at a temperature substantially higher than in the conventional magneto-optical trap.

•Jan 1, 1995•0 citations

Fast and efficient loading of a Rb magneto-optical trap using light-induced atomic desorption

Sergey Nikitich Atutov, R. Calabrese, V. Guidi +10 more

We have obtained fast loading of a rubidium magneto-optical trap and very high collection efficiency by capturing the atoms desorbed by a light flash from a polydimethylsiloxane film deposited on the internal surface of a cell. The atoms are trapped with an effective loading time of about 65 ms at a loading rate greater than $2\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms per second. This rate is larger than the values reported in literature and is obtained by preserving a long lifetime of the trapped atoms. This lifetime exceeds the filling time by nearly two orders of magnitude. Trap loading by light-induced desorption from siloxane compounds can be very effectively applied to store and trap a large number of atoms in the case of very weak atomic flux or extremely low vapor density. It can be also effectively used for fast production of ultracold atoms.

Physical Review A•May 22, 2003•95 citations

Improved atom number with a dual color magneto—optical trap

Qiang Cao, Xinyu Luo, Kui-Yi Gao +3 more

We demonstrate a novel dual color magneto—optical trap (MOT), which uses two sets of overlapping laser beams to cool and trap 87 Rb atoms. The volume of cold cloud in the dual color MOT is strongly dependent on the frequency difference of the laser beams and can be significantly larger than that in the normal MOT with single frequency MOT beams. Our experiment shows that the dual color MOT has the same loading rate as the normal MOT, but much longer loading time, leading to threefold increase in the number of trapped atoms. This indicates that the larger number is caused by reduced light induced loss. The dual color MOT is very useful in experiments where both high vacuum level and large atom number are required, such as single chamber quantum memory and Bose—Einstein condensation (BEC) experiments. Compared to the popular dark spontaneous-force optical trap (dark SPOT) technique, our approach is technically simpler and more suitable to low power laser systems.

Chinese Physics B•Apr 1, 2012•9 citations

Diode lasers for use in experiments on cold Rydberg Atoms

Bill Whitledge

This project was to measure the atomic density of (85)Rb atoms in a magneto optical trap using a low-intensity probe laser. Additionally, a dark spontaneous force optical trap was constructed in an attempt to boost the trap density. The dark spot failed to appreciably increase the overall trap density (which remained steady at - N = 10^10 atoms/cm^3) but it did increase the density of dark-state atoms in the trap by an order of magnitude. This is a useful result since many experiments on cold Rydberg atoms involve exciting atoms starting in the ground state rather than the first excited state, which is occupied by a large number of atoms in a traditional magneto optical trap. The dark spot trap shows promise for boosting both the density of dark state atoms in the trap as well as the overall trap density. However, the latter goal will require further adjustment to the trap.

•Jan 1, 2008•1 citation
We report a study on the loading of a Rb dark magneto-optical trap from a current-controlled getter source. The effect of changing the temperature and number density of the background atoms on the cold atomic population in the dark state has been investigated by passing current of different magnitudes through the getter source. We observe that the dark state collection rate of the cold atoms is maximized for an optimum value of the getter current used. In our experiments, cold atoms in the dark state have been collected with the maximum collection rate 3.6 × 10 7 atoms/s and background atom collision rate γ = 1.9 ± 0.2 s −1 for the getter current ∼4 A.
We study the properties of a Rb magneto-optic trap loaded from a commercial getter source. The source provides a large flux of atoms for the trap along with the capability of rapid turn off necessary for obtaining long trap lifetimes. We have studied the trap loading at two different values of background pressure to determine the cross section for $\mathrm{Rb}\ensuremath{-}{\mathrm{N}}_{2}$ collisions to be $3.5(4)\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}14}{\mathrm{cm}}^{2}$ and that for Rb-Rb collisions to be of order $3\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}13}{\mathrm{cm}}^{2}$. At a background pressure of $1.3\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}$ torr, we load more than 108{10}^{8}108 atoms into the trap with a time constant of 3.3 s. The 1/e1/e1/e lifetime of trapped atoms is 13 s limited only by background collisions.
Sodium atoms have been loaded from a slowed beam into a dark magneto-optical trap which confines atoms mostly in the non-absorbing F=1 ground state. This method has allowed us to achieve samples of more than 10{sup 10} atoms with optical densities in excess of 150. Temperatures around 1.2 mK and densities around 10{sup 12} cm{sup -3} have been measured using weak probe absorption. At this density an elastic collisions rate is already approximately 100 Hz. Our goal is to reach the regime where the rate is high enough to allow evaporative cooling of the trapped sample enroute to Bose-Einstein Condensation, for which yet higher densities and lower temperatures are required. We report the current status of experiments underway to further increase the phase space density of the trapped atoms by cooling with polarization-gradient molasses and reloading them into a magnetic trap with a spherical quandrupole field.
A detailed experimental and theoretical investigation of a magneto-optical trap for caesium atoms is presented. Particular emphasis has been placed on achieving high spatial number densities and low temperatures. Optimizing both of these together enables efficient evaporative cooling from a conservative trap, a procedure which has recently led to the first observations of Bose-Einstein condensation in a dilute atomic vapour. The behaviour of a magneto-optical trap is nominally determined by four independent parameters: the detuning and intensity of the light field, the magnetic field gradient and the number of trapped atoms. A model is presented which incorporates previous treatments into a single description of the trap that encompasses a wide range of its behaviour. This model was tested quantitatively by measuring the temperature of the cloud and its spatial distribution as a function of the four parameters. The maximum density was found to be limited both by the reabsorption of photons scattered within the cloud and by a reduction of the confining force at small light shifts. The nonlinear variation with position of the restoring force was found to be significant in limiting the number of atoms confined to a high density. A maximum density in phase space (defined as the number of atoms in a box with sides of dimension one thermal de Broglie wavelength) of (1.5 ± 0.5) x 10-5 was observed, with a spatial density of 1.5 x 1011 atoms per cm3. Cold collision losses from a caesium magneto-optical trap have been studied with the purpose of assessing their influence on spatial densities. In contrast to previous measurements of similar quantities, these measurements did not require the use of an ultra-low (< 10-10 Torr) background vapour pressure. The dependence of the cold collision loss coefficient β on the trapping intensity was measured to permit identification of the different cold collision processes. The largest loss rates observed were those due to hyperfine structure-changing collisions, with a coefficient β = (2±1) x 10-10cm3s-1. A study is presented of a modified magneto-optical trap in which a fraction of the population is shelved into a hyperfine level that does not interact with the trapping light. In this so-called "dark" magneto-optical trap, improved densities of nearly 1012cm-3 have been previously reported for sodium. The application of the technique to caesium is not straightforward due to the larger excited state hyperfine splittings. A simple theory for caesium is presented and its main predictions verified by measurements of density, number and temperature. A density of nearly 1012cm,-3 was indeed obtained but at a temperature substantially higher than in the conventional magneto-optical trap.
We have obtained fast loading of a rubidium magneto-optical trap and very high collection efficiency by capturing the atoms desorbed by a light flash from a polydimethylsiloxane film deposited on the internal surface of a cell. The atoms are trapped with an effective loading time of about 65 ms at a loading rate greater than $2\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms per second. This rate is larger than the values reported in literature and is obtained by preserving a long lifetime of the trapped atoms. This lifetime exceeds the filling time by nearly two orders of magnitude. Trap loading by light-induced desorption from siloxane compounds can be very effectively applied to store and trap a large number of atoms in the case of very weak atomic flux or extremely low vapor density. It can be also effectively used for fast production of ultracold atoms.
We demonstrate a novel dual color magneto—optical trap (MOT), which uses two sets of overlapping laser beams to cool and trap 87 Rb atoms. The volume of cold cloud in the dual color MOT is strongly dependent on the frequency difference of the laser beams and can be significantly larger than that in the normal MOT with single frequency MOT beams. Our experiment shows that the dual color MOT has the same loading rate as the normal MOT, but much longer loading time, leading to threefold increase in the number of trapped atoms. This indicates that the larger number is caused by reduced light induced loss. The dual color MOT is very useful in experiments where both high vacuum level and large atom number are required, such as single chamber quantum memory and Bose—Einstein condensation (BEC) experiments. Compared to the popular dark spontaneous-force optical trap (dark SPOT) technique, our approach is technically simpler and more suitable to low power laser systems.
This project was to measure the atomic density of (85)Rb atoms in a magneto optical trap using a low-intensity probe laser. Additionally, a dark spontaneous force optical trap was constructed in an attempt to boost the trap density. The dark spot failed to appreciably increase the overall trap density (which remained steady at - N = 10^10 atoms/cm^3) but it did increase the density of dark-state atoms in the trap by an order of magnitude. This is a useful result since many experiments on cold Rydberg atoms involve exciting atoms starting in the ground state rather than the first excited state, which is occupied by a large number of atoms in a traditional magneto optical trap. The dark spot trap shows promise for boosting both the density of dark state atoms in the trap as well as the overall trap density. However, the latter goal will require further adjustment to the trap.