Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Foundations of Quantum Mechanics in the Light of New Technology

MULTIPLE SIGE QUANTUM DOTS FOR QUANTUM COMPUTATION

Paul A. Cain, H. Ahmed, D. A. WILLIAMS

Published Oct 1, 2002• 0 citations
Publisher

Abstract

We have fabricated coupled double quantum dots, each with a diameter of around 40nm, using trench isolation. A range of transport measurements have been performed on various double quantum dot systems at temperatures down to 20 mK. Peak splitting in the Coulomb oscillations has been clearly observed at 4.2 K due to the capacitative coupling of the two dots. An advantage of the trench isolation approach to fabricating coupled quantum dots is that secondary structures, such as single electron electrometers can be fabricated close to the dots quite easily. We present measurements showing that an electrometer 50 nm away from the double dot can detect a single hole added to one of the dots.

DOI
10.1142/9789812776716_0004

Related papers

SILICON ISOLATED DOUBLE QUANTUM-DOT QUBIT ARCHITECTURES

D. A. WILLIAMS, Michael G. Tanner, T. Ferrus +3 more

We present both experimental and theoretical results on silicon isolated double quantum-dots (IDQDs) fabricated through trench isolation of silicon-on-insulator, with near-by single electron transistors (SETs) for charge state sensing. The IDQD can be described as an artificial molecule and is therefore capable of exhibiting quantum superposition states suitable for quantum information processing.

Foundations of Quantum Mechanics in the Light of New Technology•Jun 1, 2009•1 citation

Exploring Isolated Double-Quantum-Dot Detectors for Scalable Quantum Computing Architectures

Kalid Ulas

With the progress made in advanced semiconductor manufacturing and in control and readout techniques, semiconductor based quantum computing has made significant progress in the past decade in both fidelities and coherence times. In view of scalability, an elementary computational unit that can retain key computational functionalities must be defined so that an array of such units can process information without excessive overhead. For quantum computation to proceed, not only should each qubit be able to perform operations in all dimensions about the Bloch sphere, but the detection of quantum states, either spin or charge, should also be fast, robust, and efficient. As the number of ancilla qubits needed for error correction scales with the number of computational qubits, there is a need for highly scalable, reproducible designs with a density sufficient to allow error correction. Finally, a cost-effective solution that maintains high compatibility with industry standards is needed to ensure industrialisation of such a unit. A compact arrangement eases scalability and allows a higher qubit density, while the versatility of such an architecture allows the circumvention of potentially defective or otherwise unusable portions of large-scale structures. This would allow minimising the footprint typically dedicated to error correction. This thesis proposes such an elementary unit in the form of a quadruple quantum-dot fabricated by a standard silicon-based Complementary metal- oxide-semiconductor (CMOS) process. Firstly, we show the flexibility of this device by reconfiguring the structure as a single-electron box (SEB) detector and as various double-quantum-dot (DQD) detector configurations. In all cases, we demonstrate a high fidelity fast readout exceeding 99.8% in 10µs. Finally, we discuss the ability for the DQD detector to exceed the performance of the SEB detector in an isolated quantum-dot array by thermalising with the lower temperature of T ≈42 ±2 mK as opposed to the electron temperature Te ≈139 ±4 mK.

•Jul 4, 2025•0 citations

Controlling single qubit gate fidelity in double quantum dots

J. Mosakowski, T. Ferrus, D. A. Williams +3 more

Quantum computation offers ways of solving problems which are unreachable for classical computers [1]. Double quantum dots are of great interest as candidates for implementing solid state quantum bits (qubits) because of the long electron coherence times. The use of geometrically isolated structures (with the detectors coupled capacitively) improves the electrical isolation of the dots, however, it makes the detection more challenging [2].

Silicon Nanoelectronics Workshop (SNW)•Jun 1, 2014•0 citations

Si/SiGe quantum dot with superconducting single-electron transistor charge sensor

Mingyun Yuan, Feng Pan, Zhen Yang +6 more

We report a robust process for fabrication of surface-gated Si/SiGe quantum dots (QDs) with an integrated superconducting single-electron transistor (SSET) charge sensor. A combination of a deep mesa etch and AlOx backfill is used to reduce gate leakage. After the leakage current is suppressed, Coulomb oscillations of the QD and the current-voltage characteristics of the SSET are observed at a temperature of 0.3 K. Coupling of the SSET to the QD is confirmed by using the SSET to perform sensing of the QD charge state.

arXiv:1102.4544•Applied Physics Letters•Apr 4, 2011•14 citations

State-conditional coherent charge qubit oscillations in a Si/SiGe quadruple quantum dot

Daniel R. Ward, Dohun Kim, D. E. Savage +5 more

Abstract Universal quantum computation requires high-fidelity single-qubit rotations and controlled two-qubit gates. Along with high-fidelity single-qubit gates, strong efforts have been made in developing robust two-qubit logic gates in electrically gated quantum dot systems to realise a compact and nanofabrication-compatible architecture. Here we perform measurements of state-conditional coherent oscillations of a charge qubit. Using a quadruple quantum dot formed in a Si/SiGe heterostructure, we show the first demonstration of coherent two-axis control of a double quantum dot charge qubit in undoped Si/SiGe, performing Larmor and Ramsey oscillation measurements. We extract the strength of the capacitive coupling between a pair of double quantum dots by measuring the detuning energy shift (≈75 μeV) of one double dot depending on the excess charge configuration of the other double dot. We further demonstrate that the strong capacitive coupling allows fast, state-conditional Landau–Zener–Stückelberg oscillations with a conditional π phase flip time of about 80 ps, showing a promising pathway towards multi-qubit entanglement and control in semiconductor quantum dots.

arXiv:1604.07956•npj Quantum Information•Oct 18, 2016•48 citations

Singlet-triplet oscillations in multivalley Si double quantum dots

Łukasz Cywiński, Mats Volmer, Tom Struck +2 more

Charge separation from the $(4,0)$ to the $(3,1)$ state in a Si/SiGe double quantum dot is commonly used for initialization of spin qubits and Pauli-spin-blockade readout. It was used in recent experiments involving creation of the $(3,1)$ singlet, and subsequent shuttling of one of the electrons. We present a theoretical description of the process of charge separation and singlet-triplet mixing, arriving at expressions for the singlet return probability that take into account experimentally observed finite probabilities of the creation of singlets with various patterns of valley occupations. In our analysis we focus on magnetic fields for which the electron spin Zeeman splitting is close to the valley splitting in one of the dots, when the spin-valley coupling causes a strong renormalization of the frequency of oscillations of singlet return probability. The latter effect has been recently used to perform valley splitting mapping by shuttling of one quantum dot to various locations with respect to the other. We give a detailed description of singlet-triplet dynamics near these spin-valley resonances and compare the results of calculations with measurements on double quantum dots in two distinct Si/SiGe heterostructures. Comparison of theory with experiments in which the presence of a few valley occupation patterns is visible, gives insight into the valley dependence of $g$-factors in these structures, providing support for a recently proposed theoretical model of this dependence. We also discuss how dephasing of singlet return probability oscillations near the spin-valley resonances is affected by valley splitting fluctuations caused by electric field noise.

cond-mat.mes-hallCross-listedarXiv:2604.24689•Apr 28, 2026
We have fabricated coupled double quantum dots, each with a diameter of around 40nm, using trench isolation. A range of transport measurements have been performed on various double quantum dot systems at temperatures down to 20 mK. Peak splitting in the Coulomb oscillations has been clearly observed at 4.2 K due to the capacitative coupling of the two dots. An advantage of the trench isolation approach to fabricating coupled quantum dots is that secondary structures, such as single electron electrometers can be fabricated close to the dots quite easily. We present measurements showing that an electrometer 50 nm away from the double dot can detect a single hole added to one of the dots.
With the progress made in advanced semiconductor manufacturing and in control and readout techniques, semiconductor based quantum computing has made significant progress in the past decade in both fidelities and coherence times. In view of scalability, an elementary computational unit that can retain key computational functionalities must be defined so that an array of such units can process information without excessive overhead. For quantum computation to proceed, not only should each qubit be able to perform operations in all dimensions about the Bloch sphere, but the detection of quantum states, either spin or charge, should also be fast, robust, and efficient. As the number of ancilla qubits needed for error correction scales with the number of computational qubits, there is a need for highly scalable, reproducible designs with a density sufficient to allow error correction. Finally, a cost-effective solution that maintains high compatibility with industry standards is needed to ensure industrialisation of such a unit. A compact arrangement eases scalability and allows a higher qubit density, while the versatility of such an architecture allows the circumvention of potentially defective or otherwise unusable portions of large-scale structures. This would allow minimising the footprint typically dedicated to error correction. This thesis proposes such an elementary unit in the form of a quadruple quantum-dot fabricated by a standard silicon-based Complementary metal- oxide-semiconductor (CMOS) process. Firstly, we show the flexibility of this device by reconfiguring the structure as a single-electron box (SEB) detector and as various double-quantum-dot (DQD) detector configurations. In all cases, we demonstrate a high fidelity fast readout exceeding 99.8% in 10µs. Finally, we discuss the ability for the DQD detector to exceed the performance of the SEB detector in an isolated quantum-dot array by thermalising with the lower temperature of T ≈42 ±2 mK as opposed to the electron temperature Te ≈139 ±4 mK.
We report a robust process for fabrication of surface-gated Si/SiGe quantum dots (QDs) with an integrated superconducting single-electron transistor (SSET) charge sensor. A combination of a deep mesa etch and AlOx backfill is used to reduce gate leakage. After the leakage current is suppressed, Coulomb oscillations of the QD and the current-voltage characteristics of the SSET are observed at a temperature of 0.3 K. Coupling of the SSET to the QD is confirmed by using the SSET to perform sensing of the QD charge state.
Abstract Universal quantum computation requires high-fidelity single-qubit rotations and controlled two-qubit gates. Along with high-fidelity single-qubit gates, strong efforts have been made in developing robust two-qubit logic gates in electrically gated quantum dot systems to realise a compact and nanofabrication-compatible architecture. Here we perform measurements of state-conditional coherent oscillations of a charge qubit. Using a quadruple quantum dot formed in a Si/SiGe heterostructure, we show the first demonstration of coherent two-axis control of a double quantum dot charge qubit in undoped Si/SiGe, performing Larmor and Ramsey oscillation measurements. We extract the strength of the capacitive coupling between a pair of double quantum dots by measuring the detuning energy shift (≈75 μeV) of one double dot depending on the excess charge configuration of the other double dot. We further demonstrate that the strong capacitive coupling allows fast, state-conditional Landau–Zener–Stückelberg oscillations with a conditional π phase flip time of about 80 ps, showing a promising pathway towards multi-qubit entanglement and control in semiconductor quantum dots.
Charge separation from the (4,0)(4,0)(4,0) to the (3,1)(3,1)(3,1) state in a Si/SiGe double quantum dot is commonly used for initialization of spin qubits and Pauli-spin-blockade readout. It was used in recent experiments involving creation of the (3,1)(3,1)(3,1) singlet, and subsequent shuttling of one of the electrons. We present a theoretical description of the process of charge separation and singlet-triplet mixing, arriving at expressions for the singlet return probability that take into account experimentally observed finite probabilities of the creation of singlets with various patterns of valley occupations. In our analysis we focus on magnetic fields for which the electron spin Zeeman splitting is close to the valley splitting in one of the dots, when the spin-valley coupling causes a strong renormalization of the frequency of oscillations of singlet return probability. The latter effect has been recently used to perform valley splitting mapping by shuttling of one quantum dot to various locations with respect to the other. We give a detailed description of singlet-triplet dynamics near these spin-valley resonances and compare the results of calculations with measurements on double quantum dots in two distinct Si/SiGe heterostructures. Comparison of theory with experiments in which the presence of a few valley occupation patterns is visible, gives insight into the valley dependence of ggg-factors in these structures, providing support for a recently proposed theoretical model of this dependence. We also discuss how dephasing of singlet return probability oscillations near the spin-valley resonances is affected by valley splitting fluctuations caused by electric field noise.