Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)

High-TC THz HEB mixers: Progress and prospects

Boris S. Karasik, Daniel Cunnane, Andrei V. Sergeev

Published Aug 1, 2015• 0 citations
Publisher

Abstract

We analyze the pathways for achieving the THz hot-electron bolometer (HEB) mixers using high-TCsuperconductors. Requirements to the material in order to obtain large (up to 10 GHz) intermediate frequency bandwidth as well as recent results on MgB2HEB mixer devices are discussed. Based on a thermal model of the energy relaxation in a thin film, we explain the difference between the mixing behaviors in previously studied HEB materials. We also introduce the concept of the HEB mixer based on the low electron density MBE-grown quasi-2DEG LaCuO/LaSrCuO superconductors with tunable critical temperature.

DOI
10.1109/irmmw-thz.2015.7327411

Related papers

YBaCuO HEB hot-spot model with non-uniform RF power absorption: THz mixing frequency-dependent performance

Romain G. Ladret, Annick F. Degardin, Alain Kreisler

High-TCsuperconductor (YBaCuO) hot electron bolometers (HEB) are promising THz mixers due to the large predicted bandwidth and the low local oscillator (LO) power requirement. Recently, we introduced the hot-spot model, initially dedicated to low-TCNbN devices, to predict YBaCuO mixer performance. Major improvements to the model have been introduced: local description of the power absorption along the HEB constriction, THz dependence of the resistive transition, impedance matching between the THz antenna and the constriction. Mixer noise temperature TNand conversion gain G were predicted up to 2.5 THz. For instance, TN= 2700 K (DSB) and G = -13 dB are obtained with 9 μW of LO power at 1 THz.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Aug 1, 2015•0 citations

Aluminum hot-electron bolometer mixers at submillimeter wavelengths

Anders J. Skalare, William R. McGrath, P. M. Echternach +4 more

Diffusion-cooled aluminum hot-electron bolometer (HEB) mixers are of interest for low-noise high resolution THz-frequency spectroscopy within astrophysics. Al HEB mixers offer operation with an order of magnitude less local oscillator power, higher intermediate frequency bandwidth and potentially lower noise than competing devices made from other materials. We report on mixer experiments at 618 GHz with devices fabricated from films with sheet resistances in the range from about 55 /spl Omega/ down to about 9 /spl Omega/ per square. Intermediate frequency bandwidths of up to 3 GHz were measured (1 /spl mu/m long device), with absorbed local oscillator power levels of 0.5 to 6 nW and mixer conversion up to -21.5 dB. High input coupling efficiency implies that the electrons in the device are able to thermalize before escaping from the device. It was found that the long coherence length complicates mixer operations due to the proximity of the contact pads. Also, saturation at the IF frequency may be a concern for this type of device, and warrants further studies.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•17 citations

Fabrication of high-T/sub c/ hot-electron bolometric mixers for terahertz applications

Michael J. Burns, Alan W. Kleinsasser, K. A. Delin +4 more

Superconducting hot-electron bolometers (HEB) represent a promising candidate for heterodyne mixing at frequencies exceeding 1 THz. Nb HEB mixers offer performance competitive with tunnel junctions without the frequency limit imposed by the superconducting energy gap. Although the performance of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// HEB mixers is not projected to be superior to that of Nb devices, which operate at low temperatures, they introduce the possibility of sensitive, low power heterodyne detectors operating at temperatures approaching 90 K for applications requiring portability and closed-cycle refrigeration. We report on the fabrication and characterization, both DC and RF, of high-T/sub c/ mixers based on ultra-thin (/spl les/20 nm) YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// films patterned to micrometer dimensions and incorporated into 2.5 THz planar mixer circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•12 citations

Superconducting high-Tc hot electron bolometers used as THz mixers: Predicted performance by hot spot modeling

Romain G. Ladret, Alain Kreisler, Annick F. Degardin

High-TChot electron bolometers (HEB) are promising THz mixers due to their expected wide bandwidth, large mixing gain and low intrinsic noise. In this paper, we have simulated the DC characteristics, conversion loss and noise of YBaCuO HEBs with a hot spot model usually dedicated to low-TCdevices.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2013•2 citations

THz Mixing with High-TC Hot Electron Bolometers: A Performance Modeling Assessment for Y-Ba-Cu-O Devices

Romain G. Ladret, Annick F. Degardin, Vishal Jagtap +1 more

Hot electron bolometers (HEB) made from high-TC superconducting YBa2Cu3O7–x (YBCO) oxide nano-constrictions are promising THz mixers, due to their expected wide bandwidth, large mixing gain, and low intrinsic noise. The challenge for YBCO resides, however, in the chemical reactivity of the material and the related aging effects. In this paper, we model and simulate the frequency dependent performance of YBCO HEBs operating as THz mixers. We recall first the main hypotheses of our hot spot model taking into account both the RF frequency effects in the YBCO superconducting transition and the nano-constriction impedance at THz frequencies. The predicted performance up to 4 THz is given in terms of double sideband noise temperature TDSB and conversion gain G. At 2.5 THz for instance, TDSB ≅ 1000 K and G ≅ − 6 dB could be achieved at 12.5 μW local oscillator power. We then consider a standoff target detection scheme and examine the feasibility with YBCO devices. For instance, detection at 3 m through cotton cloth in passive imaging mode could be readily achieved in moderate humidity conditions with 10 K resolution.

Photonics•Jan 25, 2019•6 citations

NbN Hot Electron Bolometric Mixers for a Quasi--Optical THz Receiver

M. Kroug

Experimental work on the development of a quasi-optical heterodyne receiver for the THz frequency range is reported. The mixing device is a superconducting hot electron bolometer (HEB) made from ultrathin, d = 3 - 5 nm, niobium nitride (NbN) films. Work described in this thesis comprises: The design of a prototype receiver using quasi-optical coupling. Device fabrication involving reactive magnetron sputtering of NbN films and lithographic definition of the antenna integrated mixer. An investigation of the receiver performance at frequencies between 0.6 THz and 2.5 THz. The best performance is obtained with HEB mixers made from NbN films with a thickness d = 3-3.5 nm and a critical temperature T c = 9 - 9.5 K. Double-side band receiver noise temperatures are 530 K at 0.6 THz, 650 K at 1.6 THz and 1100 K at 2.5 THz. Corrected for losses in the receiver input optics, these values amount to only 10 times the theoretical quantum limit. MgO as the substrate material has been shown to provide improved acoustic coupling between NbN film and the substrate compared to other materials such as Si or sapphire. A maximum IF gain bandwidth of 4.5 GHz has been measured under the same operating conditions which yield lowest noise temperature. The local oscilltor power requirement is ~250 nW absorbed in the bolometer. Quasi-optically coupled HEB mixers have become the device-of-choice for radio astronomical applications in the frequency regime at and above 1 THz.

•Jan 1, 2001•4 citations
We analyze the pathways for achieving the THz hot-electron bolometer (HEB) mixers using high-TCsuperconductors. Requirements to the material in order to obtain large (up to 10 GHz) intermediate frequency bandwidth as well as recent results on MgB2HEB mixer devices are discussed. Based on a thermal model of the energy relaxation in a thin film, we explain the difference between the mixing behaviors in previously studied HEB materials. We also introduce the concept of the HEB mixer based on the low electron density MBE-grown quasi-2DEG LaCuO/LaSrCuO superconductors with tunable critical temperature.
High-TCsuperconductor (YBaCuO) hot electron bolometers (HEB) are promising THz mixers due to the large predicted bandwidth and the low local oscillator (LO) power requirement. Recently, we introduced the hot-spot model, initially dedicated to low-TCNbN devices, to predict YBaCuO mixer performance. Major improvements to the model have been introduced: local description of the power absorption along the HEB constriction, THz dependence of the resistive transition, impedance matching between the THz antenna and the constriction. Mixer noise temperature TNand conversion gain G were predicted up to 2.5 THz. For instance, TN= 2700 K (DSB) and G = -13 dB are obtained with 9 μW of LO power at 1 THz.
Diffusion-cooled aluminum hot-electron bolometer (HEB) mixers are of interest for low-noise high resolution THz-frequency spectroscopy within astrophysics. Al HEB mixers offer operation with an order of magnitude less local oscillator power, higher intermediate frequency bandwidth and potentially lower noise than competing devices made from other materials. We report on mixer experiments at 618 GHz with devices fabricated from films with sheet resistances in the range from about 55 /spl Omega/ down to about 9 /spl Omega/ per square. Intermediate frequency bandwidths of up to 3 GHz were measured (1 /spl mu/m long device), with absorbed local oscillator power levels of 0.5 to 6 nW and mixer conversion up to -21.5 dB. High input coupling efficiency implies that the electrons in the device are able to thermalize before escaping from the device. It was found that the long coherence length complicates mixer operations due to the proximity of the contact pads. Also, saturation at the IF frequency may be a concern for this type of device, and warrants further studies.
Superconducting hot-electron bolometers (HEB) represent a promising candidate for heterodyne mixing at frequencies exceeding 1 THz. Nb HEB mixers offer performance competitive with tunnel junctions without the frequency limit imposed by the superconducting energy gap. Although the performance of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// HEB mixers is not projected to be superior to that of Nb devices, which operate at low temperatures, they introduce the possibility of sensitive, low power heterodyne detectors operating at temperatures approaching 90 K for applications requiring portability and closed-cycle refrigeration. We report on the fabrication and characterization, both DC and RF, of high-T/sub c/ mixers based on ultra-thin (/spl les/20 nm) YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// films patterned to micrometer dimensions and incorporated into 2.5 THz planar mixer circuits.
Hot electron bolometers (HEB) made from high-TC superconducting YBa2Cu3O7–x (YBCO) oxide nano-constrictions are promising THz mixers, due to their expected wide bandwidth, large mixing gain, and low intrinsic noise. The challenge for YBCO resides, however, in the chemical reactivity of the material and the related aging effects. In this paper, we model and simulate the frequency dependent performance of YBCO HEBs operating as THz mixers. We recall first the main hypotheses of our hot spot model taking into account both the RF frequency effects in the YBCO superconducting transition and the nano-constriction impedance at THz frequencies. The predicted performance up to 4 THz is given in terms of double sideband noise temperature TDSB and conversion gain G. At 2.5 THz for instance, TDSB ≅ 1000 K and G ≅ − 6 dB could be achieved at 12.5 μW local oscillator power. We then consider a standoff target detection scheme and examine the feasibility with YBCO devices. For instance, detection at 3 m through cotton cloth in passive imaging mode could be readily achieved in moderate humidity conditions with 10 K resolution.
Experimental work on the development of a quasi-optical heterodyne receiver for the THz frequency range is reported. The mixing device is a superconducting hot electron bolometer (HEB) made from ultrathin, d = 3 - 5 nm, niobium nitride (NbN) films. Work described in this thesis comprises: The design of a prototype receiver using quasi-optical coupling. Device fabrication involving reactive magnetron sputtering of NbN films and lithographic definition of the antenna integrated mixer. An investigation of the receiver performance at frequencies between 0.6 THz and 2.5 THz. The best performance is obtained with HEB mixers made from NbN films with a thickness d = 3-3.5 nm and a critical temperature T c = 9 - 9.5 K. Double-side band receiver noise temperatures are 530 K at 0.6 THz, 650 K at 1.6 THz and 1100 K at 2.5 THz. Corrected for losses in the receiver input optics, these values amount to only 10 times the theoretical quantum limit. MgO as the substrate material has been shown to provide improved acoustic coupling between NbN film and the substrate compared to other materials such as Si or sapphire. A maximum IF gain bandwidth of 4.5 GHz has been measured under the same operating conditions which yield lowest noise temperature. The local oscilltor power requirement is ~250 nW absorbed in the bolometer. Quasi-optically coupled HEB mixers have become the device-of-choice for radio astronomical applications in the frequency regime at and above 1 THz.