Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Two dimensional superconducting quantum interference filters

Jörg Oppenländer, Ch. Häussler, T. Träuble, P. Caputo, Jörg Tomes, A. Friesch, Nils Schopohl

Published Jun 1, 2003• 30 citations
Publisher

Abstract

We have successfully developed a novel superconducting quantum interferometer based on Josephson junction networks with unconventional loop size distribution. For distinct theoretically determined distributions, the magnetic field B dependent dc voltage V(B) of the interferometer possesses a unique delta-peak like characteristics around B=0. Such devices are called Superconducting Quantum Interference Filters (SQIFs). The unique voltage response of SQIFs allows novel applications, e.g., absolute magnetic field sensors, high speed logical switches and non hysteretic low noise amplifiers which can be directly connected to standard room temperature electronics. In this paper we present new experimental and theoretical results on high performance two dimensional Superconducting Quantum Interference Filters (2D SQIFs). Such 2D SQIFs can be used as absolute magnetic field sensors. Our results indicate that due to the scaling behavior of the flux to voltage transfer function and the scaling of the white output noise, a highly sensitive absolute field sensor based on 2D SQIFs can be very small in size.

DOI
10.1109/tasc.2003.814039

Related papers

Superconducting multiple loop quantum interferometers

Jörg Oppenländer, T. Träuble, Ch. Häussler +1 more

We present experimental results on the magnetic field B dependent voltage response V(B) of a number of N resistively shunted Josephson junctions connected in parallel by a multiple loop network. For an appropriate distribution of the array loop sizes, such networks constitute superconducting quantum interference filters (SQIFs) with voltage response functions V(B) that are not /spl Phi//sub 0/-periodic. The voltage response of SQIFs is a unique function around a global minimum at B=0 that has a high sensitivity and a low noise level. In contrast to conventional superconducting quantum interference devices, SQIFs can be directly employed as highly sensitive magnetometers allowing the absolute measurement of magnetic fields. The experimental results are in very good agreement with the theoretical predictions on which basis the SQIF has been fabricated, All findings suggest that superconducting quantum interference filters may allow the design of novel superconducting devices.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•49 citations

Superconducting Quantum Interference Filters as RF Amplifiers

Oleg V. Snigirev, M. L. Chukharkin, Alexey S. Kalabukhov +4 more

The superconducting quantum interference filter (SQIF) is a new type of superconducting device which has been recently proposed for highly sensitive magnetometers for absolute magnetic field measurements. It benefits of very high voltage-to-field response, which is, in contrast conventional dc SQUIDs, not periodical. The SQIF can also be used as a radiofrequency amplifier in a similar way as the dc SQUID that can operate in a gigahertz frequency range. We designed a series type of SQIF amplifier that is compatible to conventional YBa2Cu3O7(YBCO) technology on bicrystal substrates. We present analytical, numerical and scale modeling as well as first electrical measurements results at frequencies up to 10 GHz. The SQIF array consists of 50 loops with randomly distributed areas from 0.5 to 1.5 times of . We also compared it to the regular array of conventional SQUIDs with the same loop areas. We have additional dc contacts to each 5-th SQUIDs and the SQIFs for control and comparison. Devices are fabricated using Josephson junctions with 3 mum width formed in YBCO over 24/24 and 12/12 degrees grain boundaries in yttrium-stabilized zirconia (YSZ) bicrystal substrates.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•21 citations

Magnetic antenna based on two dimensional DC superconducting quantum interference filter

Lin Wang, Qing Huo Liu, William Thomas Joines +1 more

We first theoretically present a magnetic antenna based on a two dimensional DC superconducting quantum filter device. This antenna may detect the dynamical magnetic field instead of the absolute magnetic field. We call it B-antenna since it only responses to the external magnetic field. We show the robustness of 2D SQIF structure when the 2D SQIF chip encounters statistical distributions of the fabrication of individual Josephson junctions. Finally, we find that B-antenna can work properly even though the bias current is smaller than the critical current. Our research opens the dimensions of novel ultra-sensitive antennas by combing superconducting quantum interference filter devices and classic electromagnetic waves.

Digest - IEEE Antennas and Propagation Society. International Symposium•Jul 1, 2013•0 citations

Fabrication and Characteristics of SQIF Based on NbN/AlN/NbN Josephson Junctions

Huiwu Wang, Xin Tang, Wei Peng +1 more

Superconducting quantum interference filter (SQIF) is an array of superconducting quantum interference devices (SQUIDs) with different loop sizes. Such a device is capable of providing a much higher transfer factor and much higher magnetic field sensitivity with respect to those of single SQUID. Series niobium nitride (NbN) SQIF containing 400 SQUIDs with randomly varied loop areas and epitaxial NbN/AlN/NbN Josephson junctions have been developed, fabricated, and measured at helium temperature. The device shows a nonperiodic voltage response with a single sharp peak at zero magnetic field. The measured magnetic flux to voltage trans fer factor reaches 37.8 mV/Φ0at 4.2 K.

IEEE Transactions on Applied Superconductivity•Jun 22, 2020•1 citation

Synthetic area spread in two-dimensional arrays of superconducting quantum interference filters

Ross D. Monaghan, J. L. Marenkovic, Giuseppe Carlo Tettamanzi

Superconducting Quantum Interference Devices (SQUIDs), formed by incorporating Josephson junctions into loops of superconducting material, are the backbone of many modern quantum sensing systems. It has been demonstrated that, by combining multiple SQUID loops into a two-dimensional (2D) array, it is possible to fabricate ultra-high-performing radio-frequency sensors. However, to function as absolute magnetometers, current-in-use arrays require the area of each SQUID loop in the array to be incommensurate. Doing so forbids the achievement of their full potential of performance, limited only by the standard quantum limit. This is because imposing incommensurability in the areas contrasts with optimised performance in each single SQUID loop. In this work, we report that by selectively inserting bare sections of a superconducting circuit with no Josephson junctions, 2D SQUID arrays can operate as an absolute magnetometer even when no physical area spread is applied. Based on a generalisation of currently available theories, a complete analytical formulation for the one-to-one correspondence between the distribution of these bare loops and what we call a synthetic areas spread is unveiled. This synthetic spread represents the equivalent physical spread of incommensurate SQUID loops that you would use to obtain the absolute Voltage-Magnetic Flux response if no bare loops were in use. Our work opens the way to a broader use of this technology for the fabrication of ultra-high-performance absolute quantum sensors. Our approach is also experimentally verified by fabricating several 2D Superconducting Quantum Interference Filter (SQIF) arrays incorporating bare superconducting loops and by demonstrating that they behave in alignment with what is suggested by our theory.

arXiv:2511.15020•Physical Review Applied•Oct 2, 2026•0 citations

Development of 2-D Bi-SQUID Arrays With High Linearity

Susan A. E. Berggren, G. Prokopenko, Patrick Longhini +11 more

We develop a two-dimensional (2-D) superconducting quantum interference filter (SQIF) array based on the recently introduced high-linearity tri-junction bi-SQUIDs (superconducting quantum interference device). Our bi-SQUID SQIF array design is based on a tight integration of individual bi-SQUID cells sharing inductances with adjacent cells. We provide extensive computer simulations, analysis, and experimental measurements, in which we explore the phase dynamics and linearity of the array voltage response. The nonuniformity in inductances of the bi-SQUIDs produces a pronounced zero-field single antipeak in the voltage response. The antipeak linearity and size can be optimized by varying the critical current of the additional junction of each bi-SQUID. The layout implementation of the tight 2-D array integration leads to a distinct geometrical diamond shape formed by the merged dual bi-SQUID cells. Different-sized 2-D arrays are fabricated using the standard HYPRES niobium 4.5 kA/cm2fabrication process. The measured linearity, power gain, and noise properties will be analyzed for different array sizes and the results will be compared with circuit simulations. We will discuss a design approach for the electrically small magnetic field antenna and low-noise amplifiers with high bandwidth based on these 2-D bi-SQUID SQIF arrays. The results from this work will be used to design chips densely and completely covered in bi-SQUIDs that have optimized parameters such as linearity and power gain.

arXiv:1301.2163•IEEE Transactions on Applied Superconductivity•Jan 29, 2013•44 citations
We have successfully developed a novel superconducting quantum interferometer based on Josephson junction networks with unconventional loop size distribution. For distinct theoretically determined distributions, the magnetic field B dependent dc voltage V(B) of the interferometer possesses a unique delta-peak like characteristics around B=0. Such devices are called Superconducting Quantum Interference Filters (SQIFs). The unique voltage response of SQIFs allows novel applications, e.g., absolute magnetic field sensors, high speed logical switches and non hysteretic low noise amplifiers which can be directly connected to standard room temperature electronics. In this paper we present new experimental and theoretical results on high performance two dimensional Superconducting Quantum Interference Filters (2D SQIFs). Such 2D SQIFs can be used as absolute magnetic field sensors. Our results indicate that due to the scaling behavior of the flux to voltage transfer function and the scaling of the white output noise, a highly sensitive absolute field sensor based on 2D SQIFs can be very small in size.
We present experimental results on the magnetic field B dependent voltage response V(B) of a number of N resistively shunted Josephson junctions connected in parallel by a multiple loop network. For an appropriate distribution of the array loop sizes, such networks constitute superconducting quantum interference filters (SQIFs) with voltage response functions V(B) that are not /spl Phi//sub 0/-periodic. The voltage response of SQIFs is a unique function around a global minimum at B=0 that has a high sensitivity and a low noise level. In contrast to conventional superconducting quantum interference devices, SQIFs can be directly employed as highly sensitive magnetometers allowing the absolute measurement of magnetic fields. The experimental results are in very good agreement with the theoretical predictions on which basis the SQIF has been fabricated, All findings suggest that superconducting quantum interference filters may allow the design of novel superconducting devices.
The superconducting quantum interference filter (SQIF) is a new type of superconducting device which has been recently proposed for highly sensitive magnetometers for absolute magnetic field measurements. It benefits of very high voltage-to-field response, which is, in contrast conventional dc SQUIDs, not periodical. The SQIF can also be used as a radiofrequency amplifier in a similar way as the dc SQUID that can operate in a gigahertz frequency range. We designed a series type of SQIF amplifier that is compatible to conventional YBa2Cu3O7(YBCO) technology on bicrystal substrates. We present analytical, numerical and scale modeling as well as first electrical measurements results at frequencies up to 10 GHz. The SQIF array consists of 50 loops with randomly distributed areas from 0.5 to 1.5 times of . We also compared it to the regular array of conventional SQUIDs with the same loop areas. We have additional dc contacts to each 5-th SQUIDs and the SQIFs for control and comparison. Devices are fabricated using Josephson junctions with 3 mum width formed in YBCO over 24/24 and 12/12 degrees grain boundaries in yttrium-stabilized zirconia (YSZ) bicrystal substrates.
We first theoretically present a magnetic antenna based on a two dimensional DC superconducting quantum filter device. This antenna may detect the dynamical magnetic field instead of the absolute magnetic field. We call it B-antenna since it only responses to the external magnetic field. We show the robustness of 2D SQIF structure when the 2D SQIF chip encounters statistical distributions of the fabrication of individual Josephson junctions. Finally, we find that B-antenna can work properly even though the bias current is smaller than the critical current. Our research opens the dimensions of novel ultra-sensitive antennas by combing superconducting quantum interference filter devices and classic electromagnetic waves.
Superconducting quantum interference filter (SQIF) is an array of superconducting quantum interference devices (SQUIDs) with different loop sizes. Such a device is capable of providing a much higher transfer factor and much higher magnetic field sensitivity with respect to those of single SQUID. Series niobium nitride (NbN) SQIF containing 400 SQUIDs with randomly varied loop areas and epitaxial NbN/AlN/NbN Josephson junctions have been developed, fabricated, and measured at helium temperature. The device shows a nonperiodic voltage response with a single sharp peak at zero magnetic field. The measured magnetic flux to voltage trans fer factor reaches 37.8 mV/Φ0at 4.2 K.
Superconducting Quantum Interference Devices (SQUIDs), formed by incorporating Josephson junctions into loops of superconducting material, are the backbone of many modern quantum sensing systems. It has been demonstrated that, by combining multiple SQUID loops into a two-dimensional (2D) array, it is possible to fabricate ultra-high-performing radio-frequency sensors. However, to function as absolute magnetometers, current-in-use arrays require the area of each SQUID loop in the array to be incommensurate. Doing so forbids the achievement of their full potential of performance, limited only by the standard quantum limit. This is because imposing incommensurability in the areas contrasts with optimised performance in each single SQUID loop. In this work, we report that by selectively inserting bare sections of a superconducting circuit with no Josephson junctions, 2D SQUID arrays can operate as an absolute magnetometer even when no physical area spread is applied. Based on a generalisation of currently available theories, a complete analytical formulation for the one-to-one correspondence between the distribution of these bare loops and what we call a synthetic areas spread is unveiled. This synthetic spread represents the equivalent physical spread of incommensurate SQUID loops that you would use to obtain the absolute Voltage-Magnetic Flux response if no bare loops were in use. Our work opens the way to a broader use of this technology for the fabrication of ultra-high-performance absolute quantum sensors. Our approach is also experimentally verified by fabricating several 2D Superconducting Quantum Interference Filter (SQIF) arrays incorporating bare superconducting loops and by demonstrating that they behave in alignment with what is suggested by our theory.
We develop a two-dimensional (2-D) superconducting quantum interference filter (SQIF) array based on the recently introduced high-linearity tri-junction bi-SQUIDs (superconducting quantum interference device). Our bi-SQUID SQIF array design is based on a tight integration of individual bi-SQUID cells sharing inductances with adjacent cells. We provide extensive computer simulations, analysis, and experimental measurements, in which we explore the phase dynamics and linearity of the array voltage response. The nonuniformity in inductances of the bi-SQUIDs produces a pronounced zero-field single antipeak in the voltage response. The antipeak linearity and size can be optimized by varying the critical current of the additional junction of each bi-SQUID. The layout implementation of the tight 2-D array integration leads to a distinct geometrical diamond shape formed by the merged dual bi-SQUID cells. Different-sized 2-D arrays are fabricated using the standard HYPRES niobium 4.5 kA/cm2fabrication process. The measured linearity, power gain, and noise properties will be analyzed for different array sizes and the results will be compared with circuit simulations. We will discuss a design approach for the electrically small magnetic field antenna and low-noise amplifiers with high bandwidth based on these 2-D bi-SQUID SQIF arrays. The results from this work will be used to design chips densely and completely covered in bi-SQUIDs that have optimized parameters such as linearity and power gain.