Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EURASIP Journal on Wireless Communications and Networking

Compound Wiretap Channels

Yingbin Liang, Gerhard G. Kramer, H. Vincent Poor, Shlomo Shitz Shamai

Published Oct 20, 2009• 306 citations
Publisher

Abstract

This paper considers the compound wiretap channel, which generalizes Wyner's wiretap model to allow the channels to the (legitimate) receiver and to the eavesdropper to take a number of possible states. No matter which states occur, the transmitter guarantees that the receiver decodes its message and that the eavesdropper is kept in full ignorance about the message. The compound wiretap channel can also be viewed as a multicast channel with multiple eavesdroppers, in which the transmitter sends information to all receivers and keeps the information secret from all eavesdroppers. For the discrete memoryless channel, lower and upper bounds on the secrecy capacity are derived. The secrecy capacity is established for the degraded channel and the semideterministic channel with one receiver. The parallel Gaussian channel is further studied. The secrecy capacity and the secrecy degree of freedom ( ) are derived for the degraded case with one receiver. Schemes to achieve the for the case with two receivers and two eavesdroppers are constructed to demonstrate the necessity of a prefix channel in encoder design. Finally, the multi-antenna (i.e., MIMO) compound wiretap channel is studied. The secrecy capacity is established for the degraded case and an achievable is given for the general case.

DOI
10.1155/2009/142374

Related papers

Secrecy capacity region of the degraded compound multi-receiver wiretap channel

Ersen Ekrem, Şennur Ulukuş

We study the degraded compound multi-receiver wiretap channel, which consists of two groups of users and a group of eavesdroppers. We consider two different communication scenarios. In both scenarios, the transmitter sends two confidential messages, one for each group of users. In the first scenario, both messages need to be kept confidential from the eavesdroppers. For this scenario, we assume that there is only one eavesdropper. We obtain the secrecy capacity region for the general discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian multi-input multi-output (MIMO) channel model, we obtain the secrecy capacity region when there is only one user in the second group. In the second scenario, the message sent to the first group of users needs to be kept confidential from both the second group of users and eavesdroppers, whereas the message sent to the second group of users needs to be kept confidential only from the eavesdroppers. For this scenario, we do not put any restriction on the number of eavesdroppers. We find the secrecy capacity region for the general discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian MIMO channel model, we obtain the secrecy capacity region when there is only one user in the second group.

Allerton Conference on Communication, Control, and Computing•Sep 1, 2009•12 citations

Degraded Compound Multi-Receiver Wiretap Channels

Ersen Ekrem, Şennur Ulukuş

We study the degraded compound multi-receiver wiretap channel (DCMRWC). DCMRWC consists of two groups of users and a group of eavesdroppers, where, if we pick an arbitrary user from each group of users and an arbitrary eavesdropper, they satisfy a certain Markov chain. We study two different communication scenarios for this channel. In the first scenario, the transmitter wants to send a confidential message to users in the first (stronger) group and a different confidential message to users in the second (weaker) group, where both messages need to be kept confidential from the eavesdroppers. For this scenario, we assume that there is only one eavesdropper. We obtain the secrecy capacity region for the discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian multiple-input multiple-output (MIMO) channel model, we obtain the secrecy capacity region when there is only one user in the second group. In the second scenario we study, the transmitter sends a confidential message to users in the first group which needs to be kept confidential from the second group of users and the eavesdroppers. Moreover, the transmitter sends a different confidential message to users in the second group which needs to be kept confidential only from the eavesdroppers. For this scenario, we do not put any restriction on the number of eavesdroppers. As in the first scenario, we obtain the secrecy capacity region for the discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian MIMO channel model, we establish the secrecy capacity region when there is only one user in the second group.

arXiv:0910.3033•IEEE Transactions on Information Theory•Jun 12, 2012•50 citations

Compound wire-tap channels

Yingbin Liang, Gerhard G. Kramer, H. Vincent Poor +1 more

The compound wire-tap channel is studied, which is based on the classical wire-tap channel with the channel from the source to the destination and the channel from the source to the wire-tapper taking a number of states, respectively. This channel can also be viewed as the wire-tap channel with mul-tiple destinations and multiple wire-tappers, i.e., multicast with multiple wire-tappers. The source wishes to transmit information to all destinations and wants to keep the information secret from all wire-tappers. For the discrete memoryless compound wire-tap channel, lower and upper bounds on the secrecy capacity are derived and are shown to match for the degraded channel. The parallel Gaussian compound wire-tap channel is further studied, for which the secrecy capacity and the characterization of an optimal power allocation are obtained. The secrecy degree of freedom (s.d.o.f.) is also derived, which connects the secure communication rate in the high SNR regime to secure networking coding for deterministic networks. Finally, the multi-antenna (i.e., MIMO) compound wire-tap channel is studied. The secrecy capacity is established for the degraded MIMO compound wire-tap channel and an achievable s.d.o.f. is given for the general MIMO compound wire-tap channel.

Allerton Conference on Communication, Control, and Computing•Jan 1, 2007•104 citations

On Gaussian MIMO compound wiretap channels

Ersen Ekrem, Şennur Ulukuş

We study the two-user one-eavesdropper discrete memoryless compound wiretap channel, where the transmitter sends a common confidential message to both users, which needs to be kept perfectly secret from the eavesdropper. We provide a new achievable secrecy rate which is shown to be potentially better than the best known lower bound for the secrecy capacity of this compound wiretap channel. We next consider the two-user one-eavesdropper Gaussian multiple-input multiple-output (MIMO) compound wiretap channel. We obtain an achievable secrecy rate for the Gaussian MIMO compound wiretap channel by using dirty-paper coding (DPC) in the achievable scheme we provided for the discrete memoryless case. We show that the corresponding achievable secrecy rate achieves at least half of the secrecy capacity of the two-user one-eavesdropper Gaussian MIMO wiretap channel. We also obtain the secrecy capacity of the two-user one-eavesdropper Gaussian MIMO compound wiretap channel when the eavesdropper is degraded with respect to one of the two users.

Conference on Information Sciences and Systems•Mar 1, 2010•21 citations

Secure broadcasting using multiple antennas

Ersen Ekrem, Şennur Ulukuş

We consider three different secure broadcasting scenarios: i) Broadcast channels with common and confidential messages (BCC), ii) multi-receiver wiretap channels with public and confidential messages, and iii) compound wiretap channels. The BCC is a broadcast channel with two users, where in addition to the common message sent to both users, a private message, which needs to be kept hidden as much as possible from the other user, is sent to each user. In this model, each user treats the other user as an eavesdropper. The multi-receiver wiretap channel is a broadcast channel with two legitimate users and an external eavesdropper, where the transmitter sends a pair of public and confidential messages to each legitimate user. Although there is no secrecy concern about the public messages, the confidential messages need to be kept perfectly secret from the eavesdropper. The compound wiretap channel is a compound broadcast channel with a group of legitimate users and a group of eavesdroppers. In this model, the transmitter sends a common confidential message to the legitimate users, and this confidential message needs to be kept perfectly secret from all eavesdroppers. In this paper, we provide a survey of the existing information-theoretic results for these three forms of secure broadcasting problems, with a closer look at the Gaussian multiple-input multiple-output (MIMO) channel models. We also present the existing results for the more general discrete memory-less channel models, as they are often the first step in obtaining the capacity results for the corresponding Gaussian MIMO channel models.

Journal of Communications and Networks•Oct 1, 2010•21 citations

MIMO Wiretap Channels

Mohamed Nafea, Aylin Yener

This chapter considers securing wireless communications at the physical layer using multiple antennas. In particular, the multiple antenna (MIMO) wiretap channel is presented and its secrecy capacity is provided. Further investigation of the high-SNR characterization of the secrecy capacity, i.e., secure degrees of freedom, reveals that the secrecy capacity of the MIMO wiretap channel does not scale with the transmit power when the eavesdropper has an advantage over the legitimate transmitter in the number of antennas. An external multi-antenna cooperative jammer terminal is introduced to the channel model in order to improve its secrecy capacity scaling with power. The secure degrees of freedom for this new multi-terminal multi-antenna channel is characterized. While for these models the eavesdropper channel state information is known at the legitimate terminals, the chapter next removes this assumption and presents results that utilize multiple antennas in order to provide secure communications irrespective of the eavesdropper channel state. An achievable strong secrecy rate and the secure degrees of freedom characterization for the MIMO wiretap channel when the eavesdropper channel is arbitrary, varying, and unknown at the legitimate terminals are presented. Finally, the extension of this model to the two-user multiple access MIMO wiretap channel is considered and its secure degrees of freedom region is characterized. Introduction The wiretap channel and the notion of secrecy capacity, introduced in [1] and generalized by [2], have provided the framework for physical layer design for wireless channels with information theoretic guarantees against eavesdropping. A natural model in wireless communications is one which utilizes multiple antennas for transmission and reception at each node. The improvement in secrecy rate that can be obtained using multiple antennas in a point-to-point channel with an eavesdropper has been studied extensively in several references, including [3, 4]. Specifically, the secrecy capacity of the Gaussian model consisting of a multiple antenna legitimate transmitter, a multiple antenna legitimate receiver, and a multiple antenna eavesdropper, termed the multiple-input multiple-output (MIMO) wiretap channel, has been identified in full generality in [5, 6].

Cambridge University Press eBooks•Jun 16, 2017•0 citations
This paper considers the compound wiretap channel, which generalizes Wyner's wiretap model to allow the channels to the (legitimate) receiver and to the eavesdropper to take a number of possible states. No matter which states occur, the transmitter guarantees that the receiver decodes its message and that the eavesdropper is kept in full ignorance about the message. The compound wiretap channel can also be viewed as a multicast channel with multiple eavesdroppers, in which the transmitter sends information to all receivers and keeps the information secret from all eavesdroppers. For the discrete memoryless channel, lower and upper bounds on the secrecy capacity are derived. The secrecy capacity is established for the degraded channel and the semideterministic channel with one receiver. The parallel Gaussian channel is further studied. The secrecy capacity and the secrecy degree of freedom ( ) are derived for the degraded case with one receiver. Schemes to achieve the for the case with two receivers and two eavesdroppers are constructed to demonstrate the necessity of a prefix channel in encoder design. Finally, the multi-antenna (i.e., MIMO) compound wiretap channel is studied. The secrecy capacity is established for the degraded case and an achievable is given for the general case.
We study the degraded compound multi-receiver wiretap channel, which consists of two groups of users and a group of eavesdroppers. We consider two different communication scenarios. In both scenarios, the transmitter sends two confidential messages, one for each group of users. In the first scenario, both messages need to be kept confidential from the eavesdroppers. For this scenario, we assume that there is only one eavesdropper. We obtain the secrecy capacity region for the general discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian multi-input multi-output (MIMO) channel model, we obtain the secrecy capacity region when there is only one user in the second group. In the second scenario, the message sent to the first group of users needs to be kept confidential from both the second group of users and eavesdroppers, whereas the message sent to the second group of users needs to be kept confidential only from the eavesdroppers. For this scenario, we do not put any restriction on the number of eavesdroppers. We find the secrecy capacity region for the general discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian MIMO channel model, we obtain the secrecy capacity region when there is only one user in the second group.
We study the degraded compound multi-receiver wiretap channel (DCMRWC). DCMRWC consists of two groups of users and a group of eavesdroppers, where, if we pick an arbitrary user from each group of users and an arbitrary eavesdropper, they satisfy a certain Markov chain. We study two different communication scenarios for this channel. In the first scenario, the transmitter wants to send a confidential message to users in the first (stronger) group and a different confidential message to users in the second (weaker) group, where both messages need to be kept confidential from the eavesdroppers. For this scenario, we assume that there is only one eavesdropper. We obtain the secrecy capacity region for the discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian multiple-input multiple-output (MIMO) channel model, we obtain the secrecy capacity region when there is only one user in the second group. In the second scenario we study, the transmitter sends a confidential message to users in the first group which needs to be kept confidential from the second group of users and the eavesdroppers. Moreover, the transmitter sends a different confidential message to users in the second group which needs to be kept confidential only from the eavesdroppers. For this scenario, we do not put any restriction on the number of eavesdroppers. As in the first scenario, we obtain the secrecy capacity region for the discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian MIMO channel model, we establish the secrecy capacity region when there is only one user in the second group.
The compound wire-tap channel is studied, which is based on the classical wire-tap channel with the channel from the source to the destination and the channel from the source to the wire-tapper taking a number of states, respectively. This channel can also be viewed as the wire-tap channel with mul-tiple destinations and multiple wire-tappers, i.e., multicast with multiple wire-tappers. The source wishes to transmit information to all destinations and wants to keep the information secret from all wire-tappers. For the discrete memoryless compound wire-tap channel, lower and upper bounds on the secrecy capacity are derived and are shown to match for the degraded channel. The parallel Gaussian compound wire-tap channel is further studied, for which the secrecy capacity and the characterization of an optimal power allocation are obtained. The secrecy degree of freedom (s.d.o.f.) is also derived, which connects the secure communication rate in the high SNR regime to secure networking coding for deterministic networks. Finally, the multi-antenna (i.e., MIMO) compound wire-tap channel is studied. The secrecy capacity is established for the degraded MIMO compound wire-tap channel and an achievable s.d.o.f. is given for the general MIMO compound wire-tap channel.
We study the two-user one-eavesdropper discrete memoryless compound wiretap channel, where the transmitter sends a common confidential message to both users, which needs to be kept perfectly secret from the eavesdropper. We provide a new achievable secrecy rate which is shown to be potentially better than the best known lower bound for the secrecy capacity of this compound wiretap channel. We next consider the two-user one-eavesdropper Gaussian multiple-input multiple-output (MIMO) compound wiretap channel. We obtain an achievable secrecy rate for the Gaussian MIMO compound wiretap channel by using dirty-paper coding (DPC) in the achievable scheme we provided for the discrete memoryless case. We show that the corresponding achievable secrecy rate achieves at least half of the secrecy capacity of the two-user one-eavesdropper Gaussian MIMO wiretap channel. We also obtain the secrecy capacity of the two-user one-eavesdropper Gaussian MIMO compound wiretap channel when the eavesdropper is degraded with respect to one of the two users.
We consider three different secure broadcasting scenarios: i) Broadcast channels with common and confidential messages (BCC), ii) multi-receiver wiretap channels with public and confidential messages, and iii) compound wiretap channels. The BCC is a broadcast channel with two users, where in addition to the common message sent to both users, a private message, which needs to be kept hidden as much as possible from the other user, is sent to each user. In this model, each user treats the other user as an eavesdropper. The multi-receiver wiretap channel is a broadcast channel with two legitimate users and an external eavesdropper, where the transmitter sends a pair of public and confidential messages to each legitimate user. Although there is no secrecy concern about the public messages, the confidential messages need to be kept perfectly secret from the eavesdropper. The compound wiretap channel is a compound broadcast channel with a group of legitimate users and a group of eavesdroppers. In this model, the transmitter sends a common confidential message to the legitimate users, and this confidential message needs to be kept perfectly secret from all eavesdroppers. In this paper, we provide a survey of the existing information-theoretic results for these three forms of secure broadcasting problems, with a closer look at the Gaussian multiple-input multiple-output (MIMO) channel models. We also present the existing results for the more general discrete memory-less channel models, as they are often the first step in obtaining the capacity results for the corresponding Gaussian MIMO channel models.
This chapter considers securing wireless communications at the physical layer using multiple antennas. In particular, the multiple antenna (MIMO) wiretap channel is presented and its secrecy capacity is provided. Further investigation of the high-SNR characterization of the secrecy capacity, i.e., secure degrees of freedom, reveals that the secrecy capacity of the MIMO wiretap channel does not scale with the transmit power when the eavesdropper has an advantage over the legitimate transmitter in the number of antennas. An external multi-antenna cooperative jammer terminal is introduced to the channel model in order to improve its secrecy capacity scaling with power. The secure degrees of freedom for this new multi-terminal multi-antenna channel is characterized. While for these models the eavesdropper channel state information is known at the legitimate terminals, the chapter next removes this assumption and presents results that utilize multiple antennas in order to provide secure communications irrespective of the eavesdropper channel state. An achievable strong secrecy rate and the secure degrees of freedom characterization for the MIMO wiretap channel when the eavesdropper channel is arbitrary, varying, and unknown at the legitimate terminals are presented. Finally, the extension of this model to the two-user multiple access MIMO wiretap channel is considered and its secure degrees of freedom region is characterized. Introduction The wiretap channel and the notion of secrecy capacity, introduced in [1] and generalized by [2], have provided the framework for physical layer design for wireless channels with information theoretic guarantees against eavesdropping. A natural model in wireless communications is one which utilizes multiple antennas for transmission and reception at each node. The improvement in secrecy rate that can be obtained using multiple antennas in a point-to-point channel with an eavesdropper has been studied extensively in several references, including [3, 4]. Specifically, the secrecy capacity of the Gaussian model consisting of a multiple antenna legitimate transmitter, a multiple antenna legitimate receiver, and a multiple antenna eavesdropper, termed the multiple-input multiple-output (MIMO) wiretap channel, has been identified in full generality in [5, 6].