Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

ETRI Journal

New Min-sum LDPC Decoding Algorithm Using SNR-Considered Adaptive Scaling Factors

Yongmin Jung, Yunho Jung, Seongjoo Lee, Jaeseok Kim

Published Mar 19, 2014• 7 citations
Publisher

Abstract

This paper proposes a new min-sum algorithm for low-density parity-check decoding. In this paper, we first define the negative and positive effects of the received signal-to-noise ratio (SNR) in the min-sum decoding algorithm. To improve the performance of error correction by considering the negative and positive effects of the received SNR, the proposed algorithm applies adaptive scaling factors not only to extrinsic information but also to a received log-likelihood ratio. We also propose a combined variable and check node architecture to realize the proposed algorithm with low complexity. The simulation results show that the proposed algorithm achieves up to 0.4 dB coding gain with low complexity compared to existing min-sum-based algorithms.

DOI
10.4218/etrij.14.0113.0730

Related papers

A low-complex Min-Sum decoding algorithm for irregular LDPC codes

Michaelraj Kingston Roberts, Maria Falaq

This paper presents a low complexity Min-Sum algorithm for decoding irregular Low-Density Parity-Check (LDPC) codes. In the proposed algorithm, the significant improvement in the error correcting performance without enhancing the hardware complexity is achieved by employing adaptive and optimized normalization factors for both the extrinsic information and log-likelihood ratio data bits respectively. The experimental results demonstrate that the proposed algorithm with 6-bit non-uniform quantization achieves reasonable decoding performance in terms of Frame Error Rate (FER) and Bit Error Rate (BER) without increasing the hardware complexity by avoiding finite word length effects of soft information.

International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET)•Mar 1, 2016•3 citations

Difference to sum ratio factor based min-sum decoding for Low Density Parity Check Codes

Mohammad Rakibul Islam, Khandaker Sultan Mahmood, Md. Moshiur Rahman Farazi +3 more

Low Density Parity Check Codes (LDPC) give groundbreaking performance which is known to approach Shannon's limits for sufficiently large block length. Historically and recently, LDPC have been known to give superior performance than concatenated coding. In the following paper, a proposal to modify the standard Min-Sum (MS) algorithm for decoding LDPC codes is presented. This is done by introduction of a difference to sum ratio factor, κ in the check to bit node updating process. The algorithm is further extended by implementing hard decision of the Bit-Flipping (BF) algorithm over the soft decision of MS algorithm. Simulation results demonstrate that the proposed algorithms are effective in imparting a better performance in terms of a lower bit error rate (BER) at medium to high signal to noise ratio (SNR) when compared to the traditional MS algorithm while adding fair amount of complexity.

Computing, Communications and IoT Applications (ComComAp)•Jan 1, 2012•1 citation

Different perspective and approach to implement adaptive normalised belief propagation-based decoding for low-density parity check codes

Panupat Poocharoen, Mario Edgardo Magana

In this study, the authors propose an improved version of the min-sum algorithm for low-density parity check code decoding, which the authors call ‘adaptive normalised BP-based’ algorithm. Their decoder provides a compromise solution between belief propagation and the min-sum algorithms by adding an exponent offset to each variable node's intrinsic information in the check node update equation. The extrinsic information from the min-sum decoder is then adjusted by applying a negative power of the two scale factor, which can be easily implemented by right shifting the min-sum extrinsic information. The difference between their approach and other adaptive normalised min-sum decoders is that the authors select the normalisation scale factor using a clear analytical approach based on the underlying principles. The simulation results show that the proposed decoder outperforms the min-sum decoder and performs very close to the BP decoder with lower complexity.

IET Communications•Oct 16, 2012•5 citations

Min-Sum decoding of irregular LDPC codes with adaptive scaling based on mutual information

Florence Alberge

Min-Sum decoding (MS) is an alternative to belief propagation decoding with substantially lower complexity. MS often results in an overestimation of the log likelihood ratio (LLR) in particular in the early stage of the iterative process. A linear post-processing is usually performed as a compensation. With regular low density parity check codes (LDPC), a fixed scaling of the LLR yields sufficiently good results. In contrast, adaptive strategies are mandatory with irregular codes. It is well known that the scaling factor is an increasing function of the reliability of the LLR. In most of the publications, the scaling factor is envisioned as a function of both the iteration number and the signal-to-noise ratio. It is proposed here to use the mutual information between extrinsics as a measure of the reliability of the LLR. A practical implementation is derived with reasonable complexity. Compared to the literature, the proposed method yields slightly better results in terms of BER and a significant reduction in the number of iterations.

International Symposium on Turbo Codes and Iterative Information Processing•Sep 1, 2016•8 citations

Improved LDPC decoding algorithms based on min-sum algorithm

Y.V. A. C. Kumara, Chandika Bandara Wavegedara

Low-Density Parity check (LDPC) codes offer high-performance error correction near the Shannon limit which employs large code lengths and some iterations in the decoding process. The conventional decoding algorithm of LDPC is the Log Likelihood Ratio based Belief Propagation (LLR BP) which is also known as the `Sum-Product algorithm' which gives the best decoding performance and requires the most computational complexity and implementations with increased hardware complexity. Another simpler variant of this algorithm is used which is known as `min-sum algorithm' which reduces computational complexity as well as hardware complexity but with reduced accuracy. This paper analyzes the reason min-sum algorithm is more prone to errors when compared to the sum-product algorithm, and puts forward two improved algorithms which improve the performance of the min-sum algorithm with comparable algorithmic complexity.

Moratuwa Engineering Research Conference (MERCon)•Apr 1, 2016•8 citations

Modified Normalized Min-Sum decoding of LDPC codes

Rong Chen, Yiming Wang

In this paper, we present an improvement on the normalized min-sum (NMS) decoding algorithm for low density parity check codes. The modified NMS (M-NMS) algorithm introduces a more efficient adjustment for check node update computation. Taking the sub-minimum value among extrinsic information from the variable nodes into consideration, we make the correction factor varies with different iterations. Results show that, compared with standard min-sum (MS) and NMS decoding algorithms, the proposed method not only offers a better performance but also achieves a lower error floor in the high SNR region.

International Conference on Signal Processing•Oct 1, 2008•3 citations
This paper proposes a new min-sum algorithm for low-density parity-check decoding. In this paper, we first define the negative and positive effects of the received signal-to-noise ratio (SNR) in the min-sum decoding algorithm. To improve the performance of error correction by considering the negative and positive effects of the received SNR, the proposed algorithm applies adaptive scaling factors not only to extrinsic information but also to a received log-likelihood ratio. We also propose a combined variable and check node architecture to realize the proposed algorithm with low complexity. The simulation results show that the proposed algorithm achieves up to 0.4 dB coding gain with low complexity compared to existing min-sum-based algorithms.
This paper presents a low complexity Min-Sum algorithm for decoding irregular Low-Density Parity-Check (LDPC) codes. In the proposed algorithm, the significant improvement in the error correcting performance without enhancing the hardware complexity is achieved by employing adaptive and optimized normalization factors for both the extrinsic information and log-likelihood ratio data bits respectively. The experimental results demonstrate that the proposed algorithm with 6-bit non-uniform quantization achieves reasonable decoding performance in terms of Frame Error Rate (FER) and Bit Error Rate (BER) without increasing the hardware complexity by avoiding finite word length effects of soft information.
Low Density Parity Check Codes (LDPC) give groundbreaking performance which is known to approach Shannon's limits for sufficiently large block length. Historically and recently, LDPC have been known to give superior performance than concatenated coding. In the following paper, a proposal to modify the standard Min-Sum (MS) algorithm for decoding LDPC codes is presented. This is done by introduction of a difference to sum ratio factor, κ in the check to bit node updating process. The algorithm is further extended by implementing hard decision of the Bit-Flipping (BF) algorithm over the soft decision of MS algorithm. Simulation results demonstrate that the proposed algorithms are effective in imparting a better performance in terms of a lower bit error rate (BER) at medium to high signal to noise ratio (SNR) when compared to the traditional MS algorithm while adding fair amount of complexity.
In this study, the authors propose an improved version of the min-sum algorithm for low-density parity check code decoding, which the authors call ‘adaptive normalised BP-based’ algorithm. Their decoder provides a compromise solution between belief propagation and the min-sum algorithms by adding an exponent offset to each variable node's intrinsic information in the check node update equation. The extrinsic information from the min-sum decoder is then adjusted by applying a negative power of the two scale factor, which can be easily implemented by right shifting the min-sum extrinsic information. The difference between their approach and other adaptive normalised min-sum decoders is that the authors select the normalisation scale factor using a clear analytical approach based on the underlying principles. The simulation results show that the proposed decoder outperforms the min-sum decoder and performs very close to the BP decoder with lower complexity.
Min-Sum decoding (MS) is an alternative to belief propagation decoding with substantially lower complexity. MS often results in an overestimation of the log likelihood ratio (LLR) in particular in the early stage of the iterative process. A linear post-processing is usually performed as a compensation. With regular low density parity check codes (LDPC), a fixed scaling of the LLR yields sufficiently good results. In contrast, adaptive strategies are mandatory with irregular codes. It is well known that the scaling factor is an increasing function of the reliability of the LLR. In most of the publications, the scaling factor is envisioned as a function of both the iteration number and the signal-to-noise ratio. It is proposed here to use the mutual information between extrinsics as a measure of the reliability of the LLR. A practical implementation is derived with reasonable complexity. Compared to the literature, the proposed method yields slightly better results in terms of BER and a significant reduction in the number of iterations.
Low-Density Parity check (LDPC) codes offer high-performance error correction near the Shannon limit which employs large code lengths and some iterations in the decoding process. The conventional decoding algorithm of LDPC is the Log Likelihood Ratio based Belief Propagation (LLR BP) which is also known as the `Sum-Product algorithm' which gives the best decoding performance and requires the most computational complexity and implementations with increased hardware complexity. Another simpler variant of this algorithm is used which is known as `min-sum algorithm' which reduces computational complexity as well as hardware complexity but with reduced accuracy. This paper analyzes the reason min-sum algorithm is more prone to errors when compared to the sum-product algorithm, and puts forward two improved algorithms which improve the performance of the min-sum algorithm with comparable algorithmic complexity.
In this paper, we present an improvement on the normalized min-sum (NMS) decoding algorithm for low density parity check codes. The modified NMS (M-NMS) algorithm introduces a more efficient adjustment for check node update computation. Taking the sub-minimum value among extrinsic information from the variable nodes into consideration, we make the correction factor varies with different iterations. Results show that, compared with standard min-sum (MS) and NMS decoding algorithms, the proposed method not only offers a better performance but also achieves a lower error floor in the high SNR region.