Quantum time correlation functions are often the principal objects of interest in experimental investigations of the dynamics of quantum systems. For instance, transport properties, such as diffusion and reaction rate coefficients, can be obtained by integrating these functions. The evaluation of such correlation functions entails sampling from quantum equilibrium density operators and quantum time evolution of operators. For condensed phase and complex systems, where quantum dynamics is difficult to carry out, approximations must often be made to compute these functions. We present a general scheme for the computation of correlation functions, which preserves the full quantum equilibrium structure of the system and approximates the time evolution with quantum-classical Liouville dynamics. Several aspects of the scheme are discussed, including a practical and general approach to sample the quantum equilibrium density, the properties of the quantum-classical Liouville equation in the context of correlation function computations, simulation schemes for the approximate dynamics and their interpretation and connections to other approximate quantum dynamical methods.
Quantum time correlation functions are often the principal objects of interest in experimental investigations of the dynamics of quantum systems. For instance, transport properties, such as diffusion and reaction rate coefficients, can be obtained by integrating these functions. The evaluation of such correlation functions entails sampling from quantum equilibrium density operators and quantum time evolution of operators. For condensed phase and complex systems, where quantum dynamics is difficult to carry out, approximations must often be made to compute these functions. We present a general scheme for the computation of correlation functions, which preserves the full quantum equilibrium structure of the system and approximates the time evolution with quantum-classical Liouville dynamics. Several aspects of the scheme are discussed, including a practical and general approach to sample the quantum equilibrium density, the properties of the quantum-classical Liouville equation in the context of correlation function computations, simulation schemes for the approximate dynamics and their interpretation and connections to other approximate quantum dynamical methods.
The dynamics of a quantum system coupled to a classical environment and subject to constraints that drive it out of equilibrium are described. The evolution of the system is governed by the quantum-classical Liouville equation. Rather than evaluating the evolution of the mixed quantum-classical density operator, we derive exact equations of motion for the nonequilibrium average values of a set of operators or variables, along with correlation function expressions for the dissipative coefficients that enter these equations. These equations are obtained by requiring that the exact nonequilibrium averages are equal to local nonequilibrium averages that depend on auxiliary fields whose values satisfy evolution equations obtained using projection operator methods. The results are illustrated by deriving reaction-diffusion equations coupled to fluid hydrodynamic equations for a solution of quantum particles that can exist in two metastable states. Nonequilibrium steady states are discussed along with the reaction rate and diffusion correlation functions that characterize such states.
The statistical mechanics of systems whose evolution is governed by mixed quantum-classical dynamics is investigated. The algebraic properties of the quantum-classical time evolution of operators and of the density matrix are examined and compared to those of full quantum mechanics. The equilibrium density matrix that appears in this formulation is stationary under the dynamics and a method for its calculation is presented. The response of a quantum-classical system to an external force which is applied from the distant past when the system is in equilibrium is determined. The structure of the resulting equilibrium time correlation function is examined and the quantum-classical limits of equivalent quantum time correlation functions are derived. The results provide a framework for the computation of equilibrium time correlation functions for mixed quantum-classical systems.
Dynamical maps are the principal subject of the open system theory. Formally, the dynamical map of a given open quantum system is a density matrix transformation that takes any initial state and sends it to the state at a later time. Physically, it encapsulates the system’s evolution due to coupling with its environment. Hence, the theory provides a flexible and accurate framework for computing expectation values of open system observables. However, expectation values-or more generally, single-time correlation functions-capture only the simplest aspects of a quantum system’s dynamics. A complete characterization of the dynamics requires access to multi-time correlation functions as well: phenomena like detailed balance, linear and non-linear response, non-equilibrium transport in general, or even sequential measurements of system observables are all described in terms of multi-time correlations. For closed systems, such correlations are well-defined, even though knowledge of the system’s state alone is insufficient to determine them fully. In contrast, the standard dynamical map formalism for open systems does not account for multi-time correlations, as it is fundamentally limited to describing state evolution. Here, we extend the scope of open quantum system theory by developing a systematic perturbation theory for computing multi-time correlation functions.
Abstract Chapter 14 covers the statistical mechanics of driven quantum systems and the non-equilibrium ensembles associated with them. The topic is presented both from the state-vector and density matrix perspectives. The chapter begins with a discussion of driving forces resulting from light-matter interactions and their treatment via time-dependent perturbation theory. The Fermi Golden Rule is derived, and it is shown how to incorporate the Golden Rule into the calculation of frequency spectra within the canonical ensemble, which then connects to canonical quantum time correlation functions. The formalism is derived again from the quantum Liouville equation. The discussion then turns to the challenge of computing quantum time correlation functions and approximate techniques based on the Feynman path integral of Chapter 12. These schemes include centroid and ring-polymer molecular dynamics as well as open-path integral methods
Computing quantum dynamics in condensed matter systems is an open challenge due to the exponential scaling of exact algorithms with the number of degrees of freedom. Current methods try to reduce the cost of the calculation using classical dynamics as the key ingredient of approximations of the quantum time evolution. Two main approaches exist, quantum classical and semi-classical, but they suffer from various difficulties, in particular when trying to go beyond the classical approximation. It may then be useful to reconsider the problem focusing on statistical time-dependent averages rather than directly on the dynamics. In this paper, we discuss a recently developed scheme for calculating symmetrized correlation functions. In this scheme, the full (complex time) evolution is broken into segments alternating thermal and real-time propagation, and the latter is reduced to classical dynamics via a linearization approximation. Increasing the number of segments systematically improves the result with respect to full classical dynamics, but at a cost which is still prohibitive. If only one segment is considered, a cumulant expansion can be used to obtain a computationally efficient algorithm, which has proven accurate for condensed phase systems in moderately quantum regimes. This scheme is summarized in the second part of the paper. We conclude by outlining how the cumulant expansion formally provides a way to improve convergence also for more than one segment. Future work will focus on testing the numerical performance of this extension and, more importantly, on investigating the limit for the number of segments that goes to infinity of the approximate expression for the symmetrized correlation function to assess formally its convergence to the exact result.
Abstract Correlated classical and quantum many‐particle systems out of equilibrium are of high interest in many fields, including dense plasmas, correlated solids, and ultracold atoms. Accurate theoretical description of these systems is challenging both, conceptionally and with respect to computational resources. While for classical systems, in principle, exact simulations are possible via molecular dynamics, this is not the case for quantum systems. Alternatively, one can use many‐particle approaches such as hydrodynamics, kinetic theory, or nonequilibrium Green functions (NEGF). However, NEGF exhibit a very unfavorable cubic scaling of the CPU time with the number of time steps. An alternative is the G1–G2 scheme [N. Schlünzen et al., Phys. Rev. Lett. 124, 076601 (2020)] which allows for NEGF simulations with time linear scaling, however, at the cost of large memory consumption. The reason is the need to store the two‐particle correlation function. This problem can be overcome for a number of approximations by reformulating the kinetic equations in terms of fluctuations – an approach that was developed, for classical systems, by Yu.L. Klimontovich [JETP 33, 982 (1957)]. Here, we present an overview of his ideas and extend them to quantum systems. In particular, we demonstrate that this quantum fluctuations approach can reproduce the nonequilibrium GW approximation [E. Schroedter et al., Cond. Matt. Phys. 25, 23401 (2022)] promising high accuracy at low computational cost which arises from an effective semiclassical stochastic sampling procedure. We also demonstrate how to extend the approach to the two‐time exchange‐correlation functions and the density response properties. [E. Schroedter et al., Phys. Rev. B 108, 205109 (2023)]. The results are equivalent to the Bethe–Salpeter equation for the two‐time exchange‐correlation function when the generalized Kadanoff‐Baym ansatz with Hartree‐Fock propagators is applied [E. Schroedter and M. Bonitz, phys. stat. sol. (b) 2024, 2300564].