Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Procedia Engineering

All-Optical Nanoscale Microring Device and System Design for Nano Communication

Nisakorn W. Sangwaranatee, Nisakorn W. Sangwaranatee, C. Teeka, Preecha P. Yupapin

Published Jan 1, 2012• 0 citations
Publisher

Abstract

In this paper, we have shown that the two components (TE and TM waves) of polarized light are manipulated by using the orthogonal soliton pair within a PANDA ring resonator known as a dark-bright soliton pair. In operation, the orthogonal soliton sets can be generated by using the system. The optical field is fed into the ring resonator system, which is controlled by an optical switch by using a single microring. To form the initial spin states, the magnetic field is induced by an aluminum plate (Al) coupled on AlGaAs waveguides for optoelectronic spin-up and - down states. The optoelectronic spin is formed by using the TE and TM wave components. In this manipulation, the electromagnetic radiation is formed by using the orthogonal soliton pulses. In fact, they are photons, which behave like elementary particles. Hence, the spin axis of photon is always parallel to its direction of motion. Many orthogonal sets are also available and existed, in which the spin conservation of many particles is maintained for large scale system use. Therefore, for future applications, the use for high performance storage, low power magnetic logic, quantum logic, quantum gate, nano antenna, nano radio, and applications of spintronic sensing can be realized based on realistic device parameters.

DOI
10.1016/j.proeng.2012.01.1301

Related papers

SOLITON SPIN AND WAVE-PARTICLE DUALITY

Somsak Mitatha, S. GLOMEGLOM, C. Teeka +2 more

By using the optical add-drop filter which is formed by a microring resonator, and after a dark soliton pulse is fed into an input port of the add-drop filter, the orthogonal soliton pair (dark and bright solitons) can be formed within the system and detected simultaneously at the output ports. Under the resonant condition, the conversion of dark and bright solitons corresponding to the left-hand and right-hand soliton orientations can be generated and seen. Whenever a soliton (photon) is absorbed by an object, an angular momentum of either +ℏ or -ℏ is imparted to the object, in which two possible soliton states known as soliton spins are exhibited and confirmed by the helical phase presentation. In application, the train of orthogonal solitons, i.e. many solitons (photons) with slightly different wavelengths can be generated by using the modified add-drop filter, which is available for many soliton spins and long distance spin transport investigations.

Optics and Photonics Letters•Jul 31, 2011•3 citations

Future Challenges

Preecha Yupapin, Jalil Ali

Whispering gallery modes (WGMs) of waves in nature such as electromagnetic wave, sound wave, and matter wave have shown interesting results, which can be useful for fundamental studies and applications in optoelectronics and nanoelectronics, especially after the announcement of the 2012 Nobel Prize in Physics for WGMs [1,2], where the authors confirmed that atoms can be trapped (stopped) by using WGMs in a microsphere. However, there are two more kinds of devices that can be used to trap light beams (atoms); the use of microcavity arrays performed by Yanik and Fan [3], and a nonlinear microring resonator by Yupapin and Pornsuwancharoen [4] for stopping light. Recently, Ang and Ngo [5] have also done experiments with slowing light in microresonators using a microring system. In this article, a new design of microring resonator device is proposed, which can be used to generate four forms of light simultaneously on a chip, whereas the storing and harvesting of trapped atoms/molecules can also be available. The proposed device is made up of silica and InGaAsP/InP with linear optical add-drop filter incorporating two nonlinear micro/nano rings on both sides of the center ring (modified add-drop filter). This particular configuration is known as a PANDA ring resonator [6] as shown in Figure 14.1. Light pulse, for instance, Gaussian, and bright and dark solitons are fed into the system through different ports such as an add port and through port. By using the practical device parameters, the simulation results are obtained using the Optiwave and MATLAB programs. Results obtained by both analytical and numerical methods show that many applications can be exploited. In application, when the practical device parameters are used, then such a device can be fabricated and implemented in the near future.

CRC Press eBooks•Aug 28, 2013•0 citations

Photon Switching using Nonlinear PANDA Ring Resonetor

Sa-nga Songmuang, Suphanchai Punthawanunt, Somsak Mitatha +1 more

We propose a new system of an all optical switching system using an optical add/drop filter consisting of two nano ring resonators. The dynamic behavior of dark-bright soliton collision within the modified add/drop optical filter device, which it is known as PANDA ring resonator. By using the dark-bright soliton conversion control within the PANDA ring, the obtained output signals can be attenuated and used to perform the single photon switching, which is capable for security code application. Results obtained have shown that the random binary codes based on a single photon switching can be formed by using the polarized light components, dark and bright solitons, whereas the single photon switching codes can be obtained by using the attenuated dark-bright soliton conversion signals output signals.

Procedia Engineering•Jan 1, 2011•5 citations

Soliton spin manipulation using an optical add‐drop filter

Somsak Mitatha, Sorayut Glomglome, C. Teeka +1 more

Abstract By using the optical add‐drop filter which is formed by a microring resonator.After a dark soliton pulse is fed into an input port of the add‐drop filter, the orthogonal soliton pair (dark and bright solitons) can be formed within the system and detected simultaneously at the output ports. Under the resonant condition, the conversion of dark and bright solitons corresponding to the left‐hand and right hand soliton orientations can be generated and seen. Whenever a soliton(photon) is absorbed by an object, an angular momentum of either +h or −h is imparted to the object, in which two possible soliton states known as soliton spins are exhibited and confirmed by the helical phase presentation. In application, the train of orthogonal solitons, that is, many solitons (photons) with slightly different wavelengths can be generated by using the modified add‐drop filter, which is available for many soliton spin investigations. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:1100–1103, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26671

Microwave and Optical Technology Letters•Feb 16, 2012•0 citations

Novel soliton cryptography using optical key generated by orthogonal dark-bright soliton pair

Xaythavy Louangvilay, Somsak Mitatha, Masahiro Yoshida +2 more

A new method of optical cryptography using dark-bright soliton conversion control within a modified add/drop optical filter is proposed. A pair of optical keys is randomly generated and transmitted into the transmission line, where finally the corrected keys between Alice (sender) and Bob (receiver) can be retrieved. In principle, the coincidence (orthogonal) dark-bright soliton pair has shown promising behaviors, especially when they propagate into the π/2 phase shifter, i.e. beamsplitter, the shift in phase of π/2 between dark and bright solitons is occurred and separated. Such behaviors can be used to form the orthogonal light modes (solitons), which are useful for cryptographic application, where in this case the long-distance cryptography can be easily managed. We have derived and presented a new concept of multi-orthogonal solitons generated by using dark-bright soliton pulses within the modified add/drop optical filter, which is known as a PANDA ring resonator. By using the dark-bright soliton conversion control, the obtained output of the dynamic states can be used to randomly form the multi-orthogonal soliton pairs, which can be available for computer and communication security applications, especially for long-distance link.

Optical Engineering•Sep 3, 2012•1 citation

SOLITON SPIN IN AN ADD–DROP OPTICAL FILTER FOR LONG DISTANCE SPIN TRANSPORT

C. Teeka, Muhammad Safwan Abd Aziz, Surasak Pipatsart +3 more

A new concept of an optical spin generation using bright and dark soliton conversion behaviors within a modified optical add–drop filters known as a PANDA ring resonator is proposed. The orthogonal solitons can be formed randomly within the system and detected simultaneously at the output ports. Under the resonant condition, the orthogonal solitons corresponding to the left-hand and right-hand solitons (photons) can be generated. Whenever a photon is absorbed by an object, an angular momentum of either +ℏ or -ℏ is imparted to the object, in which two possible spin states known as soliton spins are exhibited. Many soliton spins, i.e., many particles, dynamic spin and long distance spin transport using the proposed design are also discussed.

SPIN•Feb 28, 2012•0 citations
In this paper, we have shown that the two components (TE and TM waves) of polarized light are manipulated by using the orthogonal soliton pair within a PANDA ring resonator known as a dark-bright soliton pair. In operation, the orthogonal soliton sets can be generated by using the system. The optical field is fed into the ring resonator system, which is controlled by an optical switch by using a single microring. To form the initial spin states, the magnetic field is induced by an aluminum plate (Al) coupled on AlGaAs waveguides for optoelectronic spin-up and - down states. The optoelectronic spin is formed by using the TE and TM wave components. In this manipulation, the electromagnetic radiation is formed by using the orthogonal soliton pulses. In fact, they are photons, which behave like elementary particles. Hence, the spin axis of photon is always parallel to its direction of motion. Many orthogonal sets are also available and existed, in which the spin conservation of many particles is maintained for large scale system use. Therefore, for future applications, the use for high performance storage, low power magnetic logic, quantum logic, quantum gate, nano antenna, nano radio, and applications of spintronic sensing can be realized based on realistic device parameters.
By using the optical add-drop filter which is formed by a microring resonator, and after a dark soliton pulse is fed into an input port of the add-drop filter, the orthogonal soliton pair (dark and bright solitons) can be formed within the system and detected simultaneously at the output ports. Under the resonant condition, the conversion of dark and bright solitons corresponding to the left-hand and right-hand soliton orientations can be generated and seen. Whenever a soliton (photon) is absorbed by an object, an angular momentum of either +ℏ or -ℏ is imparted to the object, in which two possible soliton states known as soliton spins are exhibited and confirmed by the helical phase presentation. In application, the train of orthogonal solitons, i.e. many solitons (photons) with slightly different wavelengths can be generated by using the modified add-drop filter, which is available for many soliton spins and long distance spin transport investigations.
Whispering gallery modes (WGMs) of waves in nature such as electromagnetic wave, sound wave, and matter wave have shown interesting results, which can be useful for fundamental studies and applications in optoelectronics and nanoelectronics, especially after the announcement of the 2012 Nobel Prize in Physics for WGMs [1,2], where the authors confirmed that atoms can be trapped (stopped) by using WGMs in a microsphere. However, there are two more kinds of devices that can be used to trap light beams (atoms); the use of microcavity arrays performed by Yanik and Fan [3], and a nonlinear microring resonator by Yupapin and Pornsuwancharoen [4] for stopping light. Recently, Ang and Ngo [5] have also done experiments with slowing light in microresonators using a microring system. In this article, a new design of microring resonator device is proposed, which can be used to generate four forms of light simultaneously on a chip, whereas the storing and harvesting of trapped atoms/molecules can also be available. The proposed device is made up of silica and InGaAsP/InP with linear optical add-drop filter incorporating two nonlinear micro/nano rings on both sides of the center ring (modified add-drop filter). This particular configuration is known as a PANDA ring resonator [6] as shown in Figure 14.1. Light pulse, for instance, Gaussian, and bright and dark solitons are fed into the system through different ports such as an add port and through port. By using the practical device parameters, the simulation results are obtained using the Optiwave and MATLAB programs. Results obtained by both analytical and numerical methods show that many applications can be exploited. In application, when the practical device parameters are used, then such a device can be fabricated and implemented in the near future.
We propose a new system of an all optical switching system using an optical add/drop filter consisting of two nano ring resonators. The dynamic behavior of dark-bright soliton collision within the modified add/drop optical filter device, which it is known as PANDA ring resonator. By using the dark-bright soliton conversion control within the PANDA ring, the obtained output signals can be attenuated and used to perform the single photon switching, which is capable for security code application. Results obtained have shown that the random binary codes based on a single photon switching can be formed by using the polarized light components, dark and bright solitons, whereas the single photon switching codes can be obtained by using the attenuated dark-bright soliton conversion signals output signals.
Abstract By using the optical add‐drop filter which is formed by a microring resonator.After a dark soliton pulse is fed into an input port of the add‐drop filter, the orthogonal soliton pair (dark and bright solitons) can be formed within the system and detected simultaneously at the output ports. Under the resonant condition, the conversion of dark and bright solitons corresponding to the left‐hand and right hand soliton orientations can be generated and seen. Whenever a soliton(photon) is absorbed by an object, an angular momentum of either +h or −h is imparted to the object, in which two possible soliton states known as soliton spins are exhibited and confirmed by the helical phase presentation. In application, the train of orthogonal solitons, that is, many solitons (photons) with slightly different wavelengths can be generated by using the modified add‐drop filter, which is available for many soliton spin investigations. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:1100–1103, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26671
A new method of optical cryptography using dark-bright soliton conversion control within a modified add/drop optical filter is proposed. A pair of optical keys is randomly generated and transmitted into the transmission line, where finally the corrected keys between Alice (sender) and Bob (receiver) can be retrieved. In principle, the coincidence (orthogonal) dark-bright soliton pair has shown promising behaviors, especially when they propagate into the π/2 phase shifter, i.e. beamsplitter, the shift in phase of π/2 between dark and bright solitons is occurred and separated. Such behaviors can be used to form the orthogonal light modes (solitons), which are useful for cryptographic application, where in this case the long-distance cryptography can be easily managed. We have derived and presented a new concept of multi-orthogonal solitons generated by using dark-bright soliton pulses within the modified add/drop optical filter, which is known as a PANDA ring resonator. By using the dark-bright soliton conversion control, the obtained output of the dynamic states can be used to randomly form the multi-orthogonal soliton pairs, which can be available for computer and communication security applications, especially for long-distance link.
A new concept of an optical spin generation using bright and dark soliton conversion behaviors within a modified optical add–drop filters known as a PANDA ring resonator is proposed. The orthogonal solitons can be formed randomly within the system and detected simultaneously at the output ports. Under the resonant condition, the orthogonal solitons corresponding to the left-hand and right-hand solitons (photons) can be generated. Whenever a photon is absorbed by an object, an angular momentum of either +ℏ or -ℏ is imparted to the object, in which two possible spin states known as soliton spins are exhibited. Many soliton spins, i.e., many particles, dynamic spin and long distance spin transport using the proposed design are also discussed.