One can drive a system away from equilibrium by bringing it in contact with reservoirs at a different temperature or chemical potential; as a result, heat or particle currents will develop. Recently, the interest in the fluctuations of these currents has increased considerably, both from a theoretical and an experimental point of view. We studied current fluctuations in the Totally Assymetric Simple Exclusion Process(TASEP), which consists of a one-dimensional lattice in which each site is either empty or occupied by at most one particle. The particles enter the lattice with rate α, and exit the lattice with rate β, provided these moves are allowed by the exclusion statistics. In our work, the current is then taken to be equal to the total number of particles that has passed through all bonds up to a certain time. Using a powerful numerically exact technique called the Density Matrix Renormalization Group (DMRG), we were able to obtain results for the first three cumulants of the current and their time dependence in the various phases of the TASEP (determined by the values of α and β). Furthermore, by studying ensenbles of histories weighted by an exponential function of the current, we found that the TASEP displays a space‐time phase transition.
One can drive a system away from equilibrium by bringing it in contact with reservoirs at a different temperature or chemical potential; as a result, heat or particle currents will develop. Recently, the interest in the fluctuations of these currents has increased considerably, both from a theoretical and an experimental point of view. We studied current fluctuations in the Totally Assymetric Simple Exclusion Process(TASEP), which consists of a one-dimensional lattice in which each site is either empty or occupied by at most one particle. The particles enter the lattice with rate α, and exit the lattice with rate β, provided these moves are allowed by the exclusion statistics. In our work, the current is then taken to be equal to the total number of particles that has passed through all bonds up to a certain time. Using a powerful numerically exact technique called the Density Matrix Renormalization Group (DMRG), we were able to obtain results for the first three cumulants of the current and their time dependence in the various phases of the TASEP (determined by the values of α and β). Furthermore, by studying ensenbles of histories weighted by an exponential function of the current, we found that the TASEP displays a space‐time phase transition.
One can drive a system away from equilibrium by brining it in contact with reservoirs at a different temperature or chemical potential; as a result, heat or particle currents will develop. Recently, the interest in the fluctuations of these currents has increased considerably, both from a theoretical and an experimental point of view. We studied current fluctuations in the Totally Asymmetric Simple Exclusion Process (TASEP), which consists of a one‐dimensional lattice in which each site is either empty or occupied by at most one particle. The particles enter the lattice with rate α, move to the right in the bulk of the lattice with rate 1, and exit the lattice with rate β, provided these moves are allowed by the exclusion statistics. In our work, the current is then taken to be equal to the total number of particles that has passed through all bonds up to a certain time. Using a powerful numerically exact technique called the Density Matrix Renormalization Group (DMRG), we were able to obtain results for the first three cumulants of the current and their time dependence in the various phases of the TASEP (determined by the values of α and β). Furthermore, by studying ensenbles of histories weighted by an exponential function of the current, we found that the TASEP displays a space‐time phase transition.
We study the fluctuations of the current J ( t ) of the totally asymmetric exclusion process with open boundaries. Using a density matrix renormalization group approach, we calculate the cumulant generating function of the current. This function can be interpreted as a free energy for an ensemble in which histories are weighted by exp ( − sJ ( t )). We show that in this ensemble the model has a first-order spacetime phase transition at s = 0. We numerically determine the finite size scaling of the cumulant generating function near this phase transition, both in the non-equilibrium steady state and for large times.
In recent years, one-dimensional driven diffusion models consisting of particles on a lattice have been studied. The most famous topics of these models are solvability and phase transitions. For example, the exact stationary-state solution of the asymmetric exclusion process (ASEP) with an open boundary condition can be obtained as a matrix product form and its physical quantities exhibit boundary-induced phase transitions in the thermodynamic limit. There are three regimes, namely, maximal-current (MC) phase, low-density (LD) phase and high-density (HD) phase in the phase diagram. The two-species models or three-state models are also interesting. The stationary-state solutions of the two-species totally asymmetric exclusion process (TASEP) with a periodic boundary condition and an open boundary condition can be obtained as matrix product forms. The model in ref. 6 exhibits two phases in which symmetry breaks spontaneously. Furthermore, the model in ref. 7 exhibits phase separation. In this note, the two-species TASEP with a new open boundary condition different from the condition in ref. 6 is introduced and we obtain the stationary-state solution exactly as a matrix product form and calculate the physical quantities in the thermodynamic limit. Let us consider a stochastic process on an L-site chain with two-species particles. We note j 1⁄4 0 if site j is empty, j 1⁄4 1 if site j is occupied by the first-class particle and j 1⁄4 2 if site j is occupied by the second-class particle. The exchange rule in the bulk of the chain is expressed as 10 ! 01 with a rate 1; ð1Þ 20 ! 02 with a rate 1; ð2Þ 12 ! 21 with a rate 1: ð3Þ
The one-dimensional totally asymmetric simple exclusion process, a Markov process describing classical hard-core particles hopping in the same direction, is considered on a periodic lattice of L sites. The relaxation to the nonequilibrium steady state, which occurs on the time scale t∼L^{3/2} for large L, is studied for the half-filled system with N=L/2 particles. Using large L asymptotics of Bethe ansatz formulas for the eigenstates, exact expressions depending explicitly on the rescaled time t/L^{3/2} are obtained for the average and two-point function of the local density, and for the current fluctuations for simple (stationary, flat and step) initial conditions, relating previous results for the infinite system to stationary large deviations. The final formulas have a nice interpretation in terms of a functional integral with the action of a scalar field in a linear potential.
We revisit the totally asymmetric simple exclusion process with open boundaries (TASEP), focussing on the recent discovery by de Gier and Essler that the model has a dynamical transition along a nontrivial line in the phase diagram. This line coincides neither with any change in the steady-state properties of the TASEP, nor the corresponding line predicted by domain wall theory. We provide numerical evidence that the TASEP indeed has a dynamical transition along the de Gier-Essler line, finding that the most convincing evidence was obtained from Density Matrix Renormalisation Group (DMRG) calculations. By contrast, we find that the dynamical transition is rather hard to see in direct Monte Carlo simulations of the TASEP. We furthermore discuss in general terms scenarios that admit a distinction between static and dynamic phase behaviour.
This thesis mainly concerned with traffic and transport problems. Traffic flow is understood as a many-body system in which moving particles have asymmetric interactions. The Totally Asymmetric Simple Exclusion Process (TASEP) is a non-equilibrium lattice model which has been used widely in traffic modelling. In fact, it is the paradigmatic model for most of transport processes. In this model, objects move forward in one direction along a line segment and they are not allowed to pass each other. Traffic jam and Protein synthesis are two interesting examples which can be studied using this model. For traffic jam model, the above rules apply to cars travelling on a one-way road. This model will provide us with information on how much traffic the road can carry, where to put traffic lights, how wide should be the road and where to put the intersections. For the other example, protein synthesis, the TASEP could model ribosome moving on mRNA strands to produce proteins. Understanding the mechanism of this process not only provides us information about the regulation and control of protein synthesis, but also may be helpful to find therapeutic applications, as ribosome is the target of many antibiotics. For such non-equilibrium systems, which have interactions with the environment, there are no general framework such as the laws of thermodynamics and statistical mechanics for closed systems in equilibrium. This increases the importance of using numerical techniques. In the TASEP model, the road (in vehicular traffic model) or the mRNA strands (in Protein synthesis) is represented a lattice of sites which are either occupied by exactly one particle or are empty. The Matrix Product States (MPS) representation is a useful approach to describe the probability distribution of these stochastic systems. The main idea is to efficiently represent the probability distribution of the stochastic system by a tensor network ansatz, which truncating unimportant degrees of freedom, can be a solution to the problem of the exponential increase in parameters with the size of the system, and correspondingly, the high computational costs. We can formulate the stochastic process in terms of an evolution operator similar to the Hamiltonian for a quantum many-body system. We use the adapted version of the Time Evolving Block Decimation (TEBD) algorithm — which is used for simulation of one-dimensional quantum systems — to study the evolution of the system and extract useful properties of the model in the steady state, such as density profile, current, velocity, correlation functions, etc. Then, we introduce an approach for evaluating the behaviour of a tagged particle in a system with open boundary condition and compute the distance travelled by this particle, the number of particle entered to the system during an interval time and time-dependent correlation functions.