Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics and Spectroscopy

Light slowdown in Bragg waveguide

G. G. Kozlov, Valerii S Zapasskii, V. V. Ovsyankin

Published Sep 1, 2010• 4 citations
Publisher

Abstract

A Bragg waveguide is analyzed from the viewpoint of obtaining slow light. It is shown that, for this system, a complete mathematical analysis of the pulse propagation with allowance for leakage is possible. Calculations are presented that show that, in a TiO 2 /SiO 2 -based Bragg waveguide, one can obtain a group index of ∼1000 with a spatial decay length of ∼3 mm for a nanosecond-scale pulse. Distortion of the pulse due to the group index dispersion proves to be acceptable, in this case, for the pulse propagation length of about 3 mm, which corresponds to the fractional pulse delay ∼10. We also analyze the propagation of the light pulse in the Bragg waveguide with a quantum well inside and show possibility of obtaining a group index of ∼10000.

DOI
10.1134/s0030400x10090146

Related papers

Slow light pulse propagation in dispersive media

Torben Roland Nielsen, Jesper Mørk, Andrei V. Lavrinenko

We present a theoretical and numerical analysis of pulse propagation in a semiconductor photonic crystal waveguide with embedded quantum dots in a regime where the pulse is subjected to both waveguide and material dispersion. The group index and the transmission are investigated by finite-difference-time-domain Maxwell–Bloch simulations and compared to analytic results. For long pulses the group index (transmission) for the combined system is significantly enhanced (reduced) relative to slow light based on purely material or waveguide dispersion. Shorter pulses are strongly distorted and depending on parameters broadening or break-up of the pulse may be observed. The transition from linear to nonlinear pulse propagation is quantified in terms of the spectral width of the pulse.

Comptes Rendus Physique•Dec 1, 2009•2 citations

Slow light in quantum dot photonic crystal waveguides

Torben Roland Nielsen, Andrei V. Lavrinenko, Jesper Mørk

A theoretical analysis of pulse propagation in a semiconductor quantum dot photonic crystal waveguide in the regime of electromagnetically induced transparency is presented. The slow light mechanism considered here is based on both material and waveguide dispersion. The group index ng for the combined system is significantly enhanced relative to slow light based on purely material or waveguide dispersion.

Applied Physics Letters•Mar 16, 2009•24 citations

The effect of higher-order dispersion on slow light propagation in photonic crystal waveguides

R.J.P. Engelen, Yoshimasa Sugimoto, Yoshinori Watanabe +5 more

We have studied the dispersion of ultrafast pulses in a photonic crystal waveguide as a function of optical frequency, in both experiment and theory. With phase-sensitive and time-resolved near-field microscopy, the light was probed inside the waveguide in a non-invasive manner. The effect of dispersion on the shape of the pulses was determined. As the optical frequency decreased, the group velocity decreased. Simultaneously, the measured pulses were broadened during propagation, due to an increase in group velocity dispersion. On top of that, the pulses exhibited a strong asymmetric distortion as the propagation distance increased. The asymmetry increased as the group velocity decreased. The asymmetry of the pulses is caused by a strong increase of higher order dispersion. As the group velocity was reduced to 0.116(9) .c, we found group velocity dispersion of -1.1(3) .10(6) ps(2)/km and third order dispersion of up to 1.1(4) .10(5) ps(3)/km. We have modelled our interferometric measurements and included the full dispersion of the photonic crystal waveguide. Our mathematical model and the experimental findings showed a good correspondence. Our findings show that if the most commonly used slow light regime in photonic crystals is to be exploited, great care has to be taken about higher-order dispersion.

Optics Express•Jan 1, 2006•165 citations

Slow light based on material and waveguide dispersion

Torben Roland Nielsen, Andrei V. Lavrinenko, Jesper Mørk +1 more

We study slow light pulse propagation in a photonic crystal structure consisting of a dispersive and absorptive dielectric material and compare it with the constant wave case. The group index and the transmission are investigated for the example of an ensemble of semiconductor quantum dots embedded in a photonic crystal waveguide by FDTD Maxwell‐Bloch simulations. The total group index scales linearly with the material based group index while the transmission has a power dependency on the material based absorption coefficient.

AIP conference proceedings•Jan 1, 2009•1 citation

Slow Light Gap Solitons

Jacob B. Khurgin, R.S. Tucker

One of the key issues when dealing with slow light is the inevitable effect of dispersion, the result of which is to broaden a pulse upon propagation. Moreover, the dispersion tends to increase when the group velocity, the speed at which the pulse propagates, decreases. To see this, we note that if we write the group velocity vg ≡ c/ng, where ng is the group index, then we find that ng = n+ωdn/dω. Since for the materials we are interested in, the refractive index does not vary strongly in magnitude, and slow light is obtained when the derivative dn/dω is large and positive. However, as the variations in the magnitude of n itself are limited, the large derivative can only be maintained over a narrow bandwidth ∝ (dn/dω)−1. Therefore, a large delay implies a narrow bandwidth, and hence a limited pulse width. Here we discuss how to avoid this limit by using nonlinear effects in the form of gap solitons. Though this argument is quite simple, it can be made rigorous using the Kramers-Kronig relations. In this way it can be shown that the achievable delay in a linear, two-port device is subject to a limitation of the product of the delay and the bandwidth (Lenz et al., 2001).

CRC Press eBooks•Oct 8, 2018•0 citations

Slow-Light Optical Bullets in Arrays of Nonlinear Bragg-Grating Waveguides

Andrey A. Sukhorukov, Yuri S. Kivshar

We demonstrate that propagation direction and velocity of optical pulses can be controlled independently in the structures with multiscale modulation of the refractive index in transverse and longitudinal directions. We reveal that, in arrays of waveguides with phase-shifted Bragg gratings, the refraction angle does not depend on the speed of light, allowing for efficient spatial steering of slow light. In this system, both spatial diffraction and temporal dispersion can be designed independently, and we identify the possibility for self-collimation of slow light when spatial diffraction is suppressed for certain propagation directions. We also show that broadening of pulses in space and time can be eliminated in nonlinear media, supporting the formation of slow-light optical bullets that remain localized irrespective of propagation direction.

arXiv:physics/0605194•Physical Review Letters•Dec 4, 2006•39 citations
A Bragg waveguide is analyzed from the viewpoint of obtaining slow light. It is shown that, for this system, a complete mathematical analysis of the pulse propagation with allowance for leakage is possible. Calculations are presented that show that, in a TiO 2 /SiO 2 -based Bragg waveguide, one can obtain a group index of ∼1000 with a spatial decay length of ∼3 mm for a nanosecond-scale pulse. Distortion of the pulse due to the group index dispersion proves to be acceptable, in this case, for the pulse propagation length of about 3 mm, which corresponds to the fractional pulse delay ∼10. We also analyze the propagation of the light pulse in the Bragg waveguide with a quantum well inside and show possibility of obtaining a group index of ∼10000.
We present a theoretical and numerical analysis of pulse propagation in a semiconductor photonic crystal waveguide with embedded quantum dots in a regime where the pulse is subjected to both waveguide and material dispersion. The group index and the transmission are investigated by finite-difference-time-domain Maxwell–Bloch simulations and compared to analytic results. For long pulses the group index (transmission) for the combined system is significantly enhanced (reduced) relative to slow light based on purely material or waveguide dispersion. Shorter pulses are strongly distorted and depending on parameters broadening or break-up of the pulse may be observed. The transition from linear to nonlinear pulse propagation is quantified in terms of the spectral width of the pulse.
We have studied the dispersion of ultrafast pulses in a photonic crystal waveguide as a function of optical frequency, in both experiment and theory. With phase-sensitive and time-resolved near-field microscopy, the light was probed inside the waveguide in a non-invasive manner. The effect of dispersion on the shape of the pulses was determined. As the optical frequency decreased, the group velocity decreased. Simultaneously, the measured pulses were broadened during propagation, due to an increase in group velocity dispersion. On top of that, the pulses exhibited a strong asymmetric distortion as the propagation distance increased. The asymmetry increased as the group velocity decreased. The asymmetry of the pulses is caused by a strong increase of higher order dispersion. As the group velocity was reduced to 0.116(9) .c, we found group velocity dispersion of -1.1(3) .10(6) ps(2)/km and third order dispersion of up to 1.1(4) .10(5) ps(3)/km. We have modelled our interferometric measurements and included the full dispersion of the photonic crystal waveguide. Our mathematical model and the experimental findings showed a good correspondence. Our findings show that if the most commonly used slow light regime in photonic crystals is to be exploited, great care has to be taken about higher-order dispersion.
We study slow light pulse propagation in a photonic crystal structure consisting of a dispersive and absorptive dielectric material and compare it with the constant wave case. The group index and the transmission are investigated for the example of an ensemble of semiconductor quantum dots embedded in a photonic crystal waveguide by FDTD Maxwell‐Bloch simulations. The total group index scales linearly with the material based group index while the transmission has a power dependency on the material based absorption coefficient.
One of the key issues when dealing with slow light is the inevitable effect of dispersion, the result of which is to broaden a pulse upon propagation. Moreover, the dispersion tends to increase when the group velocity, the speed at which the pulse propagates, decreases. To see this, we note that if we write the group velocity vg ≡ c/ng, where ng is the group index, then we find that ng = n+ωdn/dω. Since for the materials we are interested in, the refractive index does not vary strongly in magnitude, and slow light is obtained when the derivative dn/dω is large and positive. However, as the variations in the magnitude of n itself are limited, the large derivative can only be maintained over a narrow bandwidth ∝ (dn/dω)−1. Therefore, a large delay implies a narrow bandwidth, and hence a limited pulse width. Here we discuss how to avoid this limit by using nonlinear effects in the form of gap solitons. Though this argument is quite simple, it can be made rigorous using the Kramers-Kronig relations. In this way it can be shown that the achievable delay in a linear, two-port device is subject to a limitation of the product of the delay and the bandwidth (Lenz et al., 2001).
We demonstrate that propagation direction and velocity of optical pulses can be controlled independently in the structures with multiscale modulation of the refractive index in transverse and longitudinal directions. We reveal that, in arrays of waveguides with phase-shifted Bragg gratings, the refraction angle does not depend on the speed of light, allowing for efficient spatial steering of slow light. In this system, both spatial diffraction and temporal dispersion can be designed independently, and we identify the possibility for self-collimation of slow light when spatial diffraction is suppressed for certain propagation directions. We also show that broadening of pulses in space and time can be eliminated in nonlinear media, supporting the formation of slow-light optical bullets that remain localized irrespective of propagation direction.