Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Europhysics Letters (EPL)

Tricritical Points with Different Universality Classes for Polymers in Two Dimensions

Pablo Serra, Jürgen F. Stilck

Published Feb 1, 1992• 9 citations
Publisher

Abstract

We report a numerical investigation of the tricritical behaviour of the dilute equilibrium polymerization model with annealed dilution on the square lattice using transfer matrix techniques. In general, the tricritical exponent ν t is found to be compatible with the value for the tricritical n = 1 model. In the limit where the dilute model is equivalent to the interacting polymer model (whose tricritical point is known as the Θ-point), we observe a crossover of ν t to the tricritical n → 0 model value.

DOI
10.1209/0295-5075/17/5/008

Related papers

FIRST AND SECOND ORDER TRANSITIONS IN DILUTE O (n) MODELS

Wenan Guo, Henk W. J. Blöte, Bernard Nienhuis

We explore the phase diagram of an O (n) model on the honeycomb lattice with vacancies, using finite-size scaling and transfer-matrix methods. We make use of the loop representation of the O (n) model, so that n is not restricted to positive integers. For low activities of the vacancies, we observe critical points of the known universality class. At high activities the transition becomes first order. For n=0 the model includes an exactly known theta point, used to describe a collapsing polymer in two dimensions. When we vary n from 0 to 1, we observe a tricritical point which interpolates between the universality classes of the theta point and the Ising tricritical point.

arXiv:cond-mat/9812270•International Journal of Modern Physics C•Feb 1, 1999•6 citations

Phase Transitions of a Dilute O(n) Model

Wenan Guo, Henk W. J. Blöte, Yuanyuan Liu

We investigate tricritical behavior of the O(n) model in two dimensions by means of transfer-matrix and finite-size scaling methods. For this purpose we consider an O(n) symmetric spin model on the honeycomb lattice with vacancies; the tricritical behavior is associated with the percolation threshold of the vacancies. The vacancies are represented by face variables on the elementary hexagons of the lattice. We apply a mapping of the spin degrees of freedom model on a non-intersecting-loop model, in which the number n of spin components assumes the role of a continuously variable parameter. This loop model serves as a suitable basis for the construction of the transfer matrix. Our results reveal the existence of a tricritical line, parametrized by n , which connects the known universality classes of the tricritical Ising model and the theta point describing the collapse of a polymer. On the other side of the Ising point, the tricritical line extends to the n = 2 point describing a tricritical O(2) model.

Communications in Theoretical Physics•Jun 15, 2004•4 citations

Universality class of the two-dimensional polymer collapse transition

Adam Nahum

The nature of the θ point for a polymer in two dimensions has long been debated, with a variety of candidates put forward for the critical exponents. This includes those derived by Duplantier and Saleur for an exactly solvable model. We use a representation of the problem via the CP^{N-1}σ model in the limit N→1 to determine the stability of this critical point. First we prove that the Duplantier-Saleur (DS) critical exponents are robust, so long as the polymer does not cross itself: They can arise in a generic lattice model and do not require fine-tuning. This resolves a longstanding theoretical question. We also address an apparent paradox: Two different lattice models, apparently both in the DS universality class, show different numbers of relevant perturbations, apparently leading to contradictory conclusions about the stability of the DS exponents. We explain this in terms of subtle differences between the two models, one of which is fine-tuned (and not strictly in the DS universality class). Next we allow the polymer to cross itself, as appropriate, e.g., to the quasi-two-dimensional case. This introduces an additional independent relevant perturbation, so we do not expect the DS exponents to apply. The exponents in the case with crossings will be those of the generic tricritical O(n) model at n=0 and different from the case without crossings. We also discuss interesting features of the operator content of the CP^{N-1} model. Simple geometrical arguments show that two operators in this field theory, with very different symmetry properties, have the same scaling dimension for any value of N (or, equivalently, any value of the loop fugacity). Also we argue that for any value of N the CP^{N-1} model has a marginal odd-parity operator that is related to the winding angle.

arXiv:1510.09223•Physical review. E•May 6, 2016•15 citations

Numerical simulation of a lattice polymer model at its integrable point

Andrea Bedini, Aleksander L. Owczarek, Thomas Prellberg

We revisit an integrable lattice model of polymer collapse using numerical simulations. This model was first studied by Blöte and Nienhuis (1989 J. Phys. A: Math. Gen. 22 1415) and it describes polymers with some attraction, providing thus a model for the polymer collapse transition. At a particular set of Boltzmann weights the model is integrable and the exponents ν = 12/23 ≈ 0.522 and γ = 53/46 ≈ 1.152 have been computed via identification of the scaling dimensions x t = 1/12 and x h = −5/48. We directly investigate the polymer scaling exponents via Monte Carlo simulations using the pruned-enriched Rosenbluth method algorithm. By simulating this polymer model for walks up to length 4096 we find ν = 0.576(6) and γ = 1.045(5), which are clearly different from the predicted values. Our estimate for the exponent ν is compatible with the known θ-point value of 4/7 and in agreement with very recent numerical evaluation by Foster and Pinettes (2012 J. Phys. A: Math. Theor. 45 505003).

arXiv:1211.0252•Journal of Physics A Mathematical and Theoretical•Jun 7, 2013•12 citations

Phase Diagram and Critical Exponents of the ±J Ising Model in Finite Dimensions by Monte Carlo Renormalization Group

Yukiyasu Ozeki, Hidetoshi Nishimori

We have performed large-scale numerical simulations for the ± J Ising model on the simple cubic and the square lattices with asymmetric weight of ferromagnetic and antiferromagnetic bonds. The Monte Carlo renormalization group method is used to estimate T c , γ/ν, β/ν and ν at various points along the phase boundary between ferromagnetic and paramagnetic phases including the tricritical point. The obtained values of T c and the resulting phase diagrams of the simple cubic and the square lattices are much more accurate than those estimated so far. In the simple cubic lattice, we find evidence for the possibility that universality of the ferromagnetic critical exponents holds along the critical line except at the tricritical point, while weak universality holds even at the tricritical point. Weak universality seems to hold also in the square lattice.

Journal of the Physical Society of Japan•Apr 1, 1987•84 citations

A new look at the collapse of two-dimensional polymers

Éric Vernier, Jesper Lykke Jacobsen, Hubert Saleur

Abstract We study the collapse of two-dimensional polymers, via an O ( n ) model on the square lattice that allows for dilution, bending rigidity and short-range monomer attractions. This model contains two candidates for the theta point, and , both exactly solvable. The relative stability of these points, and the question of which one describes the ‘generic’ theta point, have been the source of a long-standing debate. Moreover, the analytically predicted exponents of have never been convincingly observed in numerical simulations. In this paper, we shed a new light on this confusing situation. We show in particular that the continuum limit of is an unusual conformal field theory, made in fact of a simple dense polymer decorated with non-compact degrees of freedom . This implies in particular that the critical exponents take continuous rather than discrete values, and that corrections to scaling lead to an unusual integral form. Furthermore, discrete states may emerge from the continuum, but the latter are only normalizable—and hence observable—for appropriate values of the model’s parameters. We check these findings numerically. We also probe the non-compact degrees of freedom in various ways, and establish that they are related to fluctuations of the density of monomers. Finally, we construct a field theoretic model of the vicinity of and examine the flow along the multicritical line between and .

arXiv:1505.07007•Journal of Statistical Mechanics Theory and Experiment•Sep 1, 2015•33 citations
We report a numerical investigation of the tricritical behaviour of the dilute equilibrium polymerization model with annealed dilution on the square lattice using transfer matrix techniques. In general, the tricritical exponent ν t is found to be compatible with the value for the tricritical n = 1 model. In the limit where the dilute model is equivalent to the interacting polymer model (whose tricritical point is known as the Θ-point), we observe a crossover of ν t to the tricritical n → 0 model value.
We explore the phase diagram of an O (n) model on the honeycomb lattice with vacancies, using finite-size scaling and transfer-matrix methods. We make use of the loop representation of the O (n) model, so that n is not restricted to positive integers. For low activities of the vacancies, we observe critical points of the known universality class. At high activities the transition becomes first order. For n=0 the model includes an exactly known theta point, used to describe a collapsing polymer in two dimensions. When we vary n from 0 to 1, we observe a tricritical point which interpolates between the universality classes of the theta point and the Ising tricritical point.
We investigate tricritical behavior of the O(n) model in two dimensions by means of transfer-matrix and finite-size scaling methods. For this purpose we consider an O(n) symmetric spin model on the honeycomb lattice with vacancies; the tricritical behavior is associated with the percolation threshold of the vacancies. The vacancies are represented by face variables on the elementary hexagons of the lattice. We apply a mapping of the spin degrees of freedom model on a non-intersecting-loop model, in which the number n of spin components assumes the role of a continuously variable parameter. This loop model serves as a suitable basis for the construction of the transfer matrix. Our results reveal the existence of a tricritical line, parametrized by n , which connects the known universality classes of the tricritical Ising model and the theta point describing the collapse of a polymer. On the other side of the Ising point, the tricritical line extends to the n = 2 point describing a tricritical O(2) model.
The nature of the θ point for a polymer in two dimensions has long been debated, with a variety of candidates put forward for the critical exponents. This includes those derived by Duplantier and Saleur for an exactly solvable model. We use a representation of the problem via the CP^{N-1}σ model in the limit N→1 to determine the stability of this critical point. First we prove that the Duplantier-Saleur (DS) critical exponents are robust, so long as the polymer does not cross itself: They can arise in a generic lattice model and do not require fine-tuning. This resolves a longstanding theoretical question. We also address an apparent paradox: Two different lattice models, apparently both in the DS universality class, show different numbers of relevant perturbations, apparently leading to contradictory conclusions about the stability of the DS exponents. We explain this in terms of subtle differences between the two models, one of which is fine-tuned (and not strictly in the DS universality class). Next we allow the polymer to cross itself, as appropriate, e.g., to the quasi-two-dimensional case. This introduces an additional independent relevant perturbation, so we do not expect the DS exponents to apply. The exponents in the case with crossings will be those of the generic tricritical O(n) model at n=0 and different from the case without crossings. We also discuss interesting features of the operator content of the CP^{N-1} model. Simple geometrical arguments show that two operators in this field theory, with very different symmetry properties, have the same scaling dimension for any value of N (or, equivalently, any value of the loop fugacity). Also we argue that for any value of N the CP^{N-1} model has a marginal odd-parity operator that is related to the winding angle.
We revisit an integrable lattice model of polymer collapse using numerical simulations. This model was first studied by Blöte and Nienhuis (1989 J. Phys. A: Math. Gen. 22 1415) and it describes polymers with some attraction, providing thus a model for the polymer collapse transition. At a particular set of Boltzmann weights the model is integrable and the exponents ν = 12/23 ≈ 0.522 and γ = 53/46 ≈ 1.152 have been computed via identification of the scaling dimensions x t = 1/12 and x h = −5/48. We directly investigate the polymer scaling exponents via Monte Carlo simulations using the pruned-enriched Rosenbluth method algorithm. By simulating this polymer model for walks up to length 4096 we find ν = 0.576(6) and γ = 1.045(5), which are clearly different from the predicted values. Our estimate for the exponent ν is compatible with the known θ-point value of 4/7 and in agreement with very recent numerical evaluation by Foster and Pinettes (2012 J. Phys. A: Math. Theor. 45 505003).
We have performed large-scale numerical simulations for the ± J Ising model on the simple cubic and the square lattices with asymmetric weight of ferromagnetic and antiferromagnetic bonds. The Monte Carlo renormalization group method is used to estimate T c , γ/ν, β/ν and ν at various points along the phase boundary between ferromagnetic and paramagnetic phases including the tricritical point. The obtained values of T c and the resulting phase diagrams of the simple cubic and the square lattices are much more accurate than those estimated so far. In the simple cubic lattice, we find evidence for the possibility that universality of the ferromagnetic critical exponents holds along the critical line except at the tricritical point, while weak universality holds even at the tricritical point. Weak universality seems to hold also in the square lattice.
Abstract We study the collapse of two-dimensional polymers, via an O ( n ) model on the square lattice that allows for dilution, bending rigidity and short-range monomer attractions. This model contains two candidates for the theta point, and , both exactly solvable. The relative stability of these points, and the question of which one describes the ‘generic’ theta point, have been the source of a long-standing debate. Moreover, the analytically predicted exponents of have never been convincingly observed in numerical simulations. In this paper, we shed a new light on this confusing situation. We show in particular that the continuum limit of is an unusual conformal field theory, made in fact of a simple dense polymer decorated with non-compact degrees of freedom . This implies in particular that the critical exponents take continuous rather than discrete values, and that corrections to scaling lead to an unusual integral form. Furthermore, discrete states may emerge from the continuum, but the latter are only normalizable—and hence observable—for appropriate values of the model’s parameters. We check these findings numerically. We also probe the non-compact degrees of freedom in various ways, and establish that they are related to fluctuations of the density of monomers. Finally, we construct a field theoretic model of the vicinity of and examine the flow along the multicritical line between and .