Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

CQED-Enhanced Single Photon Sources From InGaAs Quantum Dots

C. Y. Hu, Ricky D. Gibson, J. A. Timpson, Sang Lam, A. M. Fox, Maurice S. Skolnick, M. Hopkinson, A. Tahraoui, John Rarity

Published Jun 1, 2007• 0 citations
Publisher

Abstract

Historically non-classical sources of single photons have been used to test quantum mechanics and to develop the field of quantum optics. Nowadays the single photon source has become a critical device for quantum communications and optical quantum information processing [Knill, et al., 2001]. A single photon source emits one photon at a time, and its quality can be evaluated by three parameters: quantum efficiency, multi-photon probability, and photon distinguishability. Among the different types single photon sources, InGaAs/GaAs quantum dots (QDs) are a promising solid state candidate showing high quantum efficiency, no bleaching effect, long-term stability, capable of high repetition rate, and compatible with standard semiconductor processing techniques. Furthermore, QDs can be embedded in micro-cavities or photonic crystal nano-cavities by in situ growth, and thus cavity quantum electrodynamics (CQED) can be exploited to improve the performance of QD-based single photon sources in all aspects mentioned above [Santori, et al., 2002].

DOI
10.1109/cleoe-iqec.2007.4386767

Related papers

Quantum-dot-based quantum devices (Conference Presentation)

Lorenzo De Santis, C. Antón, Niccolò Somaschi +5 more

Semiconductor quantum dots (QDs) are promising artificial atoms for quantum information processing: they can generate single photons flying quantum bits; they show single photon sensitivity promising to develop quantum gates and the spin of a carrier in a QD can be a quantum memory. The scalability of a quantum network requires efficient interfaces between stationary and flying quantum bits. In the last few years, our group has made important progresses in this direction using cavity quantum electrodynamics. With a deterministic positioning of a single QD in a microcavity, we control the QD spontaneous emission on demand [1]. With such technique highly efficient single photon sources with brightness as large as 80% are demonstrated [2]. By minimizing the charge noise around the QD in a gated structure [3], we demonstrate the generation of fully indistinguishable photon. The source brightness is shown to exceed by one or two orders of magnitude the one of a parametric down-conversion source of same quality [4]. Symmetrically, these devices perform as excellent interfaces between a flying quantum bit and a stationary one, where coherent control of a quantum bit can be done when only few photons [5]. References [1] A. Dousse, et al. , Phys. Rev. Lett. 101, 267404 (2008) [2] O. Gazzano, et al. , Nature Communications 4, 1425 (2013) [3] A. Nowak. et al., Nature Communications 5, 3240 (2014) [4] N. Somaschi, et al. Nature Photonics 10.1038/nphoton.2016.23 (2016). [5] V. Giesz, et al., Nature Communications doi:10.1038/ncomms11986 (2016)

•Apr 28, 2017•0 citations

Cavity-quantum electrodynamics with quantum dots

Alper Kıraz, C. Reese, B. Gayral +6 more

Semiconductor quantum dots (QDs) have emerged as promising candidates for studying quantum optical phenomena. In particular, cavity-quantum electrodynamics effects can be investigated using a single QD embedded inside a photonic nanostructure, where both the carriers and photons are confined within sub-micron length scales in all three dimensions. Since QD location inside the cavity is fixed by the growth, this system is free of the stringent trapping requirements that limit its atomic counterpart. The possibility of fabricating photonic nanostructures with ultra-small optical-mode volumes and long photon lifetimes enhances the prospects for applications in quantum information processing.

Journal of Optics B Quantum and Semiclassical Optics•Feb 26, 2003•49 citations

Bright Purcell enhanced single-photon source in the telecom O-band based on a quantum dot in a circular Bragg grating

Sascha Kolatschek, Stephanie Bauer, Cornelius Nawrath +6 more

In the field of quantum communication and quantum cryptography, the need for bright non-classical light sources remains a key requirement. Semiconductor quantum dots (QDs) have proven to be excellent candidates also being able to emit single-photons in the much sought after telecom bands. To overcome the high refractive index contrast between the semiconductor matrix and air, a main approach is to use cavity quantum electrodynamics (cQED). In this regard, circular Bragg gratings have achieved excellent results in the NIR regime [1] [2] . Using the existing fiber network, especially single-photons in the telecom O-band are favorable not only because of zero wave-packet dispersion but also for wavelength division multiplexing with classical communication signals in the telecom C-band.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•2 citations

B1 In As quantum dots: artificial atoms for solid-state quantum optics

J.H Davies, A.R Long

Though QD arrays have initially been mostly studied in an attempt to improve semiconductor lasers, much attention has been recently devoted to the revolutionary prospects opened by the unique properties of single QDs. These artificial atoms allow to mimic in solid-state systems some of the quantum optics experiments performed on atoms since the early 80’s. Recent demonstrations of coherent control experiments on QDs illustrate this fruitful analogy [10]. We will focus here our discussion on the impact of QDs on two other fields, solid-state cavity quantum electrodynamics (CQED) and the generation of quantum states of light. A single QD can be used to emit triggered single photon pulses and photon pairs, whereas its narrow emission spectrum permits to implement microcavities very efficiently to tailor its emission properties. By combining both kind of effects, it is possible to control simultaneously the number of emitted photons as well as their quantum state and to build a solid-state singlemode source of single photons (singlemode S4P) as proposed [11] and demonstrated recently by our group [12]. This novel device represents the ultimate step in a field which has been extremely active in the last 15 years, spontaneous emission (SE) control in optoelectronic devices using confined electronic and/or photonic systems [13]. Before reviewing the development of this single mode S4P, based on a single QD in a pillar microcavity, we will briefly discuss its potential applications in the field of quantum information processing and quantum communications (QIPC).

CRC Press eBooks•May 1, 2003•0 citations

A fiber coupled source of identical single photons

Henk Snijders, J. A. Frey, Justin Norman +6 more

High quality sources of single and identical (indistinguishable) photons are essential for photonic quantum information processing including boson sampling, cluster-state quantum computing, and optical quantum repeaters. To enable the use of several single photon sources in parallel and to allow the implementation of complex photonic networks, it is essential that the single photon source can be integrated easily and efficiently with optical fiber technology. Here we show a first all-solid-state InGaAs quantum dot based, integrated cavity-QED enhanced, single photon source. The source is operated by resonant optical pumping through an excitation fiber, and the single photons are collected in the fiber attached to the transmission channel of the cavity.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•1 citation

Self-assembled quantum dots in a fully tunable microcavity

Lukas Greuter

The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved

•Jan 1, 2015•0 citations
Historically non-classical sources of single photons have been used to test quantum mechanics and to develop the field of quantum optics. Nowadays the single photon source has become a critical device for quantum communications and optical quantum information processing [Knill, et al., 2001]. A single photon source emits one photon at a time, and its quality can be evaluated by three parameters: quantum efficiency, multi-photon probability, and photon distinguishability. Among the different types single photon sources, InGaAs/GaAs quantum dots (QDs) are a promising solid state candidate showing high quantum efficiency, no bleaching effect, long-term stability, capable of high repetition rate, and compatible with standard semiconductor processing techniques. Furthermore, QDs can be embedded in micro-cavities or photonic crystal nano-cavities by in situ growth, and thus cavity quantum electrodynamics (CQED) can be exploited to improve the performance of QD-based single photon sources in all aspects mentioned above [Santori, et al., 2002].
Semiconductor quantum dots (QDs) are promising artificial atoms for quantum information processing: they can generate single photons flying quantum bits; they show single photon sensitivity promising to develop quantum gates and the spin of a carrier in a QD can be a quantum memory. The scalability of a quantum network requires efficient interfaces between stationary and flying quantum bits. In the last few years, our group has made important progresses in this direction using cavity quantum electrodynamics. With a deterministic positioning of a single QD in a microcavity, we control the QD spontaneous emission on demand [1]. With such technique highly efficient single photon sources with brightness as large as 80% are demonstrated [2]. By minimizing the charge noise around the QD in a gated structure [3], we demonstrate the generation of fully indistinguishable photon. The source brightness is shown to exceed by one or two orders of magnitude the one of a parametric down-conversion source of same quality [4]. Symmetrically, these devices perform as excellent interfaces between a flying quantum bit and a stationary one, where coherent control of a quantum bit can be done when only few photons [5]. References [1] A. Dousse, et al. , Phys. Rev. Lett. 101, 267404 (2008) [2] O. Gazzano, et al. , Nature Communications 4, 1425 (2013) [3] A. Nowak. et al., Nature Communications 5, 3240 (2014) [4] N. Somaschi, et al. Nature Photonics 10.1038/nphoton.2016.23 (2016). [5] V. Giesz, et al., Nature Communications doi:10.1038/ncomms11986 (2016)
Semiconductor quantum dots (QDs) have emerged as promising candidates for studying quantum optical phenomena. In particular, cavity-quantum electrodynamics effects can be investigated using a single QD embedded inside a photonic nanostructure, where both the carriers and photons are confined within sub-micron length scales in all three dimensions. Since QD location inside the cavity is fixed by the growth, this system is free of the stringent trapping requirements that limit its atomic counterpart. The possibility of fabricating photonic nanostructures with ultra-small optical-mode volumes and long photon lifetimes enhances the prospects for applications in quantum information processing.
In the field of quantum communication and quantum cryptography, the need for bright non-classical light sources remains a key requirement. Semiconductor quantum dots (QDs) have proven to be excellent candidates also being able to emit single-photons in the much sought after telecom bands. To overcome the high refractive index contrast between the semiconductor matrix and air, a main approach is to use cavity quantum electrodynamics (cQED). In this regard, circular Bragg gratings have achieved excellent results in the NIR regime [1] [2] . Using the existing fiber network, especially single-photons in the telecom O-band are favorable not only because of zero wave-packet dispersion but also for wavelength division multiplexing with classical communication signals in the telecom C-band.
Though QD arrays have initially been mostly studied in an attempt to improve semiconductor lasers, much attention has been recently devoted to the revolutionary prospects opened by the unique properties of single QDs. These artificial atoms allow to mimic in solid-state systems some of the quantum optics experiments performed on atoms since the early 80’s. Recent demonstrations of coherent control experiments on QDs illustrate this fruitful analogy [10]. We will focus here our discussion on the impact of QDs on two other fields, solid-state cavity quantum electrodynamics (CQED) and the generation of quantum states of light. A single QD can be used to emit triggered single photon pulses and photon pairs, whereas its narrow emission spectrum permits to implement microcavities very efficiently to tailor its emission properties. By combining both kind of effects, it is possible to control simultaneously the number of emitted photons as well as their quantum state and to build a solid-state singlemode source of single photons (singlemode S4P) as proposed [11] and demonstrated recently by our group [12]. This novel device represents the ultimate step in a field which has been extremely active in the last 15 years, spontaneous emission (SE) control in optoelectronic devices using confined electronic and/or photonic systems [13]. Before reviewing the development of this single mode S4P, based on a single QD in a pillar microcavity, we will briefly discuss its potential applications in the field of quantum information processing and quantum communications (QIPC).
High quality sources of single and identical (indistinguishable) photons are essential for photonic quantum information processing including boson sampling, cluster-state quantum computing, and optical quantum repeaters. To enable the use of several single photon sources in parallel and to allow the implementation of complex photonic networks, it is essential that the single photon source can be integrated easily and efficiently with optical fiber technology. Here we show a first all-solid-state InGaAs quantum dot based, integrated cavity-QED enhanced, single photon source. The source is operated by resonant optical pumping through an excitation fiber, and the single photons are collected in the fiber attached to the transmission channel of the cavity.
The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved