Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

Inductive Coupling of Josephson Junctions to External Circuits

Charles S. Owen, Douglas J. Scalapino

Published Apr 1, 1970• 42 citations
Publisher

Abstract

The inductive coupling between a Josephson junction and a superconducting stripline is calculated. In the overlapping region they share a superconducting film, the structure having superconducting (S) and insulating layers (I) sandwiched S—I—S—I—S. The coupling arises from the magnetic field penetration through the common superconductor. An equivalent circuit representation is exhibited which has the same modes and coupling as the original system. Using the circuit analog, the power transfer is calculated for several cases of interest: (a) power is radiated outward in the stripline from a biased junction and (b) power is absorbed by the junction from a source coupled to the stripline. The criterion for matching the tunnel junction to the stripline is discussed.

DOI
10.1063/1.1659162

Related papers

The stripline coupling of thin-film josephson junctions to external circuits at microwave frequencies

Y. Sirkeinen, P. Somervuo, T. Wiik

A certain way of coupling to the thin-film Josephson tunneling junction has been studied. The coupling structure comprises a superconducting stripline which is terminated to the edge of the Nb-oxide-Pb junction. A mismatch of 23 dB has been obtained so far between the signal source and the junction at X-band compared to the earlier estimates of 40 dB between conventional size outer circuits and the junction. Prospects for improving the coupling are good. Methods of estimating the voltage and power which are coupled to the junction are given.

Revue de Physique Appliquée•Jan 1, 1974•5 citations

Kinetic-inductance coupling scheme for superconducting stripline system and its device applications

Keiji Yoshida, Keisuke Kudo, Mohammad Sajjad Hossain +1 more

The properties and applications of the inductive coupling of a superconducting stripline system, which takes advantage of kinetic inductance of thin superconducting films, are studied. The system, composed of two striplines inductively coupled through a common electrode as a four-port circuit, was formulated by obtaining its scattering coefficients in a general form. The system is characterized with the coupled-mode theory. Based on the analysis, it is proposed that a novel type of kinetic inductance devices for microwave analog components, such as directional couplers, microwave switches, variable filters, and efficient coupling elements for striplines. Experiments on stripline coupling with this scheme are also discussed.

IEEE Transactions on Magnetics•Mar 1, 1991•5 citations

Josephson Junctions

Daniel D. Stancil, Gregory T. Byrd

The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.

Wiley eBooks•Apr 5, 2022•0 citations

Numerical and experimental evaluation of mutual inductances between two superconducting striplines coupled through a superconducting intermediate layer

Yoshinao Mizugaki, Hidemitsu Hakii, Masataka Moriya +2 more

We evaluated mutual inductances between two superconducting striplines coupled through a superconducting intermediate layer in Nb Josephson IC.In order to measure the mutual inductances we designed eight test circuits based on a superconducting quantum interference device (SQUID), which included intermediate layers of two different thicknesses and four different widths. The inductance extraction program FastHenry with superconductor support was used for numerical calculation. The experimental results agreed with the calculated results, both of which confirmed that a thicker and wider intermediate layer reduced the mutual coupling more efficiently.

IEICE Electronics Express•Jan 1, 2006•4 citations

New microwave components with inductively coupled superconducting striplines

Keiji Yoshida, Mohammad Sajjad Hossain, Keiji Enpuku +1 more

A theoretical study is made of the inductive coupling of two superconducting striplines. The study takes advantage of the kinetic inductance, which is remarkable in superconducting films where the thickness is less than the London penetration depth. In the case of weak coupling where the coupled-mode description is most effective, it has been found that the forward-wave coupling leads to power exchange between two striplines with the efficiency of m= kappa 2 /( kappa 2 + Delta 2 ) at a distance of I= pi /2( kappa 2 + Delta 2 ) 1 2/. Here kappa 2 = beta 1 beta 2 M 2 /4L 1 L 2 is the coupling coefficient and delta =(1/2)(B 1 -B 2 ) is the phase mismatch parameter, where beta i , L i (i=1,2) and M are propagation constants, self-inductances and the mutual inductance of the two striplines, respectively. Numerical studies are also made for new types of kinetic inductance devices for microwave components, i.e. a directional coupler and microwave switch using the scattering coefficients in the general case.

Superconductor Science and Technology•Nov 1, 1991•1 citation

Inductive coupling of a flux-flow type Josephson oscillator to a stripline

Keiji Yoshida, J. Qin, Keiji Enpuku

A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>

IEEE Transactions on Magnetics•Mar 1, 1989•11 citations
The inductive coupling between a Josephson junction and a superconducting stripline is calculated. In the overlapping region they share a superconducting film, the structure having superconducting (S) and insulating layers (I) sandwiched S—I—S—I—S. The coupling arises from the magnetic field penetration through the common superconductor. An equivalent circuit representation is exhibited which has the same modes and coupling as the original system. Using the circuit analog, the power transfer is calculated for several cases of interest: (a) power is radiated outward in the stripline from a biased junction and (b) power is absorbed by the junction from a source coupled to the stripline. The criterion for matching the tunnel junction to the stripline is discussed.
A certain way of coupling to the thin-film Josephson tunneling junction has been studied. The coupling structure comprises a superconducting stripline which is terminated to the edge of the Nb-oxide-Pb junction. A mismatch of 23 dB has been obtained so far between the signal source and the junction at X-band compared to the earlier estimates of 40 dB between conventional size outer circuits and the junction. Prospects for improving the coupling are good. Methods of estimating the voltage and power which are coupled to the junction are given.
The properties and applications of the inductive coupling of a superconducting stripline system, which takes advantage of kinetic inductance of thin superconducting films, are studied. The system, composed of two striplines inductively coupled through a common electrode as a four-port circuit, was formulated by obtaining its scattering coefficients in a general form. The system is characterized with the coupled-mode theory. Based on the analysis, it is proposed that a novel type of kinetic inductance devices for microwave analog components, such as directional couplers, microwave switches, variable filters, and efficient coupling elements for striplines. Experiments on stripline coupling with this scheme are also discussed.
The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.
We evaluated mutual inductances between two superconducting striplines coupled through a superconducting intermediate layer in Nb Josephson IC.In order to measure the mutual inductances we designed eight test circuits based on a superconducting quantum interference device (SQUID), which included intermediate layers of two different thicknesses and four different widths. The inductance extraction program FastHenry with superconductor support was used for numerical calculation. The experimental results agreed with the calculated results, both of which confirmed that a thicker and wider intermediate layer reduced the mutual coupling more efficiently.
A theoretical study is made of the inductive coupling of two superconducting striplines. The study takes advantage of the kinetic inductance, which is remarkable in superconducting films where the thickness is less than the London penetration depth. In the case of weak coupling where the coupled-mode description is most effective, it has been found that the forward-wave coupling leads to power exchange between two striplines with the efficiency of m= kappa 2 /( kappa 2 + Delta 2 ) at a distance of I= pi /2( kappa 2 + Delta 2 ) 1 2/. Here kappa 2 = beta 1 beta 2 M 2 /4L 1 L 2 is the coupling coefficient and delta =(1/2)(B 1 -B 2 ) is the phase mismatch parameter, where beta i , L i (i=1,2) and M are propagation constants, self-inductances and the mutual inductance of the two striplines, respectively. Numerical studies are also made for new types of kinetic inductance devices for microwave components, i.e. a directional coupler and microwave switch using the scattering coefficients in the general case.
A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>