The theory of the laser amplifier is developed for conditions in which the strength of the input signal is increased from small values, where the amplification is linear, to larger values, where the amplification becomes nonlinear. The below-threshold laser amplifier oscillates at a single frequency equal to that of the input signal, and its properties are found by solution of the nonlinear equation of motion for the single excitation amplitude. For the above-threshold laser amplifier, the effects of the nonlinear behavior are to shift the laser frequency from its free-running value and to transfer intensity from the laser line to the signal frequency and to a range of satellite lines, whose frequency detunings are integer multiples of the signal detuning. The intensities of the various emission lines of the laser are calculated by power-series expansions of the field amplitudes up to terms of fourth order in the input signal strength. The onset of injection locking is determined by the conditions for which the intensity at the shifted free-running laser frequency falls to zero. The injection-locked state is characterized by a single excitation frequency equal to that of the input signal, and its properties are found by solution of the same nonlinear equation of motion as for the below-threshold amplifier. The ranges of input signal strength and detuning are determined for which the injection-locked state is stable. The energy conservation properties of the laser amplifier are considered for each of its operating states. \textcopyright{} 1996 The American Physical Society.
The theory of the laser amplifier is developed for conditions in which the strength of the input signal is increased from small values, where the amplification is linear, to larger values, where the amplification becomes nonlinear. The below-threshold laser amplifier oscillates at a single frequency equal to that of the input signal, and its properties are found by solution of the nonlinear equation of motion for the single excitation amplitude. For the above-threshold laser amplifier, the effects of the nonlinear behavior are to shift the laser frequency from its free-running value and to transfer intensity from the laser line to the signal frequency and to a range of satellite lines, whose frequency detunings are integer multiples of the signal detuning. The intensities of the various emission lines of the laser are calculated by power-series expansions of the field amplitudes up to terms of fourth order in the input signal strength. The onset of injection locking is determined by the conditions for which the intensity at the shifted free-running laser frequency falls to zero. The injection-locked state is characterized by a single excitation frequency equal to that of the input signal, and its properties are found by solution of the same nonlinear equation of motion as for the below-threshold amplifier. The ranges of input signal strength and detuning are determined for which the injection-locked state is stable. The energy conservation properties of the laser amplifier are considered for each of its operating states. \textcopyright{} 1996 The American Physical Society.
The behavior of a single-mode class-C laser in the presence of an injected signal is investigated theoretically in detail. We have determined the ranges of input signal strength and the frequency detuning for which the oscillations of the cavity electric field and the atomic induced dipole moment are simultaneously stable and have only one oscillation component with the frequency equal to that of the input signal (injection-locked state). One can reproduce all the previous results corresponding to class-A and class-B lasers from our results by using their relevant conditions. Finally, the energy conservation law is demonstrated for both the below-threshold and the injection-locked states of class-C laser amplifiers.
The influence of injected atomic coherence on a laser's operation is discussed by analyzing the semiclassical equations of motion of this system. Both stationary-steady-state and time-dependent regimes of operation are investigated. We present the dependence of the stationary laser intensity and phase on the external parameters (population inversion, amplitude of atomic coherence, and detuning). For small cavity-field detuning and large atomic coherence, both frequency and phase locking occurs. The laser frequency is locked to the atomic frequency, and the phase is locked to a value determined primarily by the phase of the atomic coherence. Under certain conditions, in the inverted regime, the output intensity is an ssS-shaped function of the atomic coherence, leading to the possibility of a bistable behavior. However, only a portion of the bistable curve gives stable stationary operation, and in critical points (the location of which depends crucially on the external parameters) time-dependent instabilities branch away. When the detuning is larger than a critical value there is neither phase nor frequency locking. We find that the time-dependent behavior of the laser intensity in this case is oscillatory (quasiperiodic), and show that there is a stable limit cycle in the phase plane of the quadratures. There is a small parameter region where a stationary steady state and an oscillatory state may coexist. We also consider the nonlinear quantum theory of a laser with injected atomic coherence, and include the effect of pumping statistics. We derive the Fokker-Planck equation for the P representation, and express the noise in terms of moments. We find that in the steady state the intensity noise can be suppressed below the shot-noise limit but that the phase fluctuations are not affected by pump regularity. For nonzero detuning, we find that transient squeezing of the phase fluctuations is possible.
A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.
The search for ever quieter light sources has fueled experimental interest in the noise properties of injection locked lasers [ 1,2,3], Ref. 1 showed that the injection of a small signal into a pump noise suppressed semi-conductor laser could suppress small longitudinal side modes whilst leaving the non-classical noise characteristics of the free running laser unaffected. In contrast [2] and [3] found that in Nd:YAG lasers the free running noise characteristics were suppressed and the output noise was an amplified version of the injected signal.
We discuss the influence of injected atomic coherence on laser dynamics. The nonlinear equations of motion for the intensity and phase give the dependence on external parameters (inversion, amplitude of the atomic coherence, and cavity-field detuning). Depending on the inversion, there can be one or three steady-state solutions corresponding to a given value of the injected coherence. The situation is analogous to optical bistability, the atomic coherence playing the role of the injected field. For zero detuning the upper, laser-like branch starts at zero value of the injected coherence and a numerical stability analysis indicates that it is the only stable solution, the lower branch being everywhere unstable. For finite detuning the upper branch starts at a finite threshold value of the injected coherence. For coherences smaller than this threshold the system exhibits oscillatory behavior that corresponds to a stable limit cycle in the phase plane of the laser quadrature variables. The intensity fluctuations of the laser exhibit antibunching for sub-Poissonian pumping statistics.
The master-equation theory for multimode semiconductor lasers [A. Eschmann and C. W. Gardiner, Phys. Rev. A 54, 760 (1996)] is adapted to treat the case of an injection-locked laser. Both the intensity noise and the phase noise of the system are examined. A decrease in the total intensity noise and in the inten- sity noises of the individual modes is found for increasing injection power, provided the injection signal does not dominate the entire system. A regime is found in which a reduction of the intensity noise below the shot noise level is obtained which is not single-mode squeezing, but which is due to anticorrelations between the individual modes, and a further regime in which true single-mode squeezing exists is also found. The phase noise is found to decrease with increasing injection strength, in other words as phase locking occurs. \textcopyright{} 1996 The American Physical Society.