Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Japanese Journal of Applied Physics

Investigation of the Performance of an Ultralow-Dark-Count Superconducting Nanowire Single-Photon Detector

Shanthi Subashchandran, Ryo Okamoto, Labao Zhang, Akira Tanaka, Masayuki Okano, Lin Kang, Jian Chen, Peiheng Wu, Shigeki Takeuchi

Published Oct 1, 2013• 11 citations
Publisher

Abstract

The realization of an ultralow-dark-count rate (DCR) along with the conservation of high detection efficiency (DE) is critical for many applications using single photon detectors in quantum information technologies, material sciences, and biological sensing. For this purpose, a fiber-coupled superconducting nanowire single-photon detector (SNSPD) with a meander-type niobium nitride nanowire (width: 50 nm) is studied. Precise measurements of the bias current dependence of DE are carried out for a wide spectral range (from 500 to 1650 nm in steps of 50 nm) using a white light source and a laser line Bragg tunable band-pass filter. An ultralow DCR (0.0015 cps) and high DE (32%) are simultaneously achieved by the SNSPD at a wavelength of 500 nm.

DOI
10.7567/jjap.52.102801

Related papers

Spectral dependence of ultra-low dark count superconducting single photon detector for the evaluation of broadband parametric fluorescence

Shanthi Subashchandran, Ryo Okamoto, Akira Tanaka +6 more

Superconducting nanowire single photon detectors (SNSPD) have unique characteristics of ultra low dark counts and wide spectrum sensitivity. These natures are indispensable for the evaluation of ultra-broadband parametric fluorescence, which are used for the quantum optical coherence tomography and novel optical non-linear experiments. Here we report the spectral dependence of the detection efficiency of a meander type SNSPD device, having reduced strip width of 50 nm, over a wide spectrum range up to near infra-red wavelength. The fiber coupled, meander type device was fabricated using 6 nm thick Niobium nitride (NbN) nanowires of reduced strip width, 50 nm, patterned over a MgO substrate with active area of 10 x 10 μm2. A maximum efficiency of 32% at 500 nm, 30% at 600 nm, 16% at 800 nm, 10% at 1000 nm, and 1% at 1550 nm with the normalized bias current of 0.95 (bias 37 μA ) was observed at 4.2 K. The salient feature of the device is, it exhibits a very low dark count rate (DCR) of only 2 Hz at the standard operating bias of 37 μA and ultra low DCR of 0.01Hz at 34 μA. Moreover, at this reduced bias with 0.01Hz DCR, the detection efficiency is not appreciably decreased in the visible region (32% at 500 nm and 30% at 600 nm) and an order decrease is observed (0.1%) at 1550 nm. The noise equivalent power (NEP) is of the order 10-19 WHz-1/2 in the visible region and 10-17 WHz- 1/2 in the near IR region. Ultra-broad band parametric fluorescence of band width from 791 nm to 1610 nm generated by a quasi-phase matched (QPM) device was successfully detected with this SSPD.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 30, 2011•4 citations

Superconducting Nanowire Single-Photon Detector with Ultralow Dark Count Rate Using Cold Optical Filters

Hiroyuki Shibata, Kaoru Shimizu, Hiroki Takesue +1 more

We report the fabrication of a superconducting nanowire single-photon detector (SSPD or SNSPD) with an ultralow dark count rate. By introducing optical band-pass filters at the input of the SSPD and cooling the filters at 3 K, the dark count rate is reduced to less than 1/100 at low bias. An SSPD with 0.1 cps dark count rate and 5.6% system detection efficiency at 1550 nm wavelength is obtained. We show that a quantum key distribution (QKD) over 300 km of fiber is possible based on a numerical calculation assuming a differential phase shift QKD protocol implemented with our SSPDs.

arXiv:1307.0893•Applied Physics Express•Jul 1, 2013•54 citations

Performances of Fiber-Coupled Superconducting Nanowire Single-Photon Detectors Measured at Ultralow Temperature

Taro Yamashita, Shigehito Miki, Wei Qiu +3 more

We report on the performance of a fiber-coupled superconducting nanowire single-photon detector (SNSPD) from 4 K down to the ultralow temperature of 16 mK for a 1550 nm wave length. The system detection efficiency (DE) increased with de creasing the temperature and reached the considerably high value of 15% with a dark count rate less than 100 cps below 1.5 K, even without an optical cavity structure. We also observed saturation of the system DE in its bias current dependency at 16 mK, which indicates that the device DE of our SNSPD nearly reached intrinsic DE despite the device having a large active area of 20 μm × 20 μm. The dark count was finite even at 16 mK and the black body radiation becomes its dominant origin in the low temperatures for fiber-coupled devices.

IEEE Transactions on Applied Superconductivity•Nov 30, 2010•7 citations

Fiber-coupled superconducting nanowire single-photon detectors integrated with a bandpass filter on the fiber end-face

Weijun Zhang, Xiaoyan Yang, Hao Li +7 more

Abstract Superconducting nanowire single-photon detectors (SNSPDs) with both high system detection efficiency (SDE) and low dark count rate (DCR) play significant roles in quantum information processes and various applications. The background dark counts of SNSPDs originate from the room temperature blackbody radiation coupled to the device via a fiber. Therefore, a bandpass filter (BPF) operated at low temperature with minimal insert loss is necessary to suppress the background DCR. Herein, a low-loss BPF integrated on a single-mode fiber end-face was designed, fabricated and verified for the low temperature implement. The fiber end-face BPF was featured with a typical passband width about 40 nm in the 1550 nm telecom band and a peak transmittance of over 0.98. SNSPD with high SDE fabricated on a distributed Bragg reflector was coupled to the BPF. The device with such a BPF showed an SDE of 80% at a DCR of 0.5 Hz, measured at 2.1 K. Compared the same device without a BPF, the DCR was reduced by over 13 dB with an SDE decrease of <3%.

Superconductor Science and Technology•Jan 10, 2018•58 citations

Micro-fiber coupled superconducting nanowire single photon detector (Conference Presentation)

Lixing You

Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.

Advanced Photon Counting Techniques•May 1, 2020•0 citations

Temperature Dependent Performances of Superconducting Nanowire Single-Photon Detectors in an Ultralow-Temperature Region

Taro Yamashita, Shigehito Miki, Wei Qiu +3 more

We present the performances of a superconducting nanowire single-photon detector (SNSPD) in an ultralow-temperature region from 16 mK to 4 K. The system detection efficiency of the SNSPD showed saturation in the bias-current and temperature dependences, and reached the considerably high value of 15% for 100 Hz dark count rate below 1.4 K at a wavelength of 1550 nm even without an optical cavity structure. We found that the dark count exists even at 16 mK and black body radiation becomes its dominant origin in the low temperatures for fiber-coupled devices.

arXiv:1009.3981•Applied Physics Express•Sep 17, 2010•56 citations
The realization of an ultralow-dark-count rate (DCR) along with the conservation of high detection efficiency (DE) is critical for many applications using single photon detectors in quantum information technologies, material sciences, and biological sensing. For this purpose, a fiber-coupled superconducting nanowire single-photon detector (SNSPD) with a meander-type niobium nitride nanowire (width: 50 nm) is studied. Precise measurements of the bias current dependence of DE are carried out for a wide spectral range (from 500 to 1650 nm in steps of 50 nm) using a white light source and a laser line Bragg tunable band-pass filter. An ultralow DCR (0.0015 cps) and high DE (32%) are simultaneously achieved by the SNSPD at a wavelength of 500 nm.
Superconducting nanowire single photon detectors (SNSPD) have unique characteristics of ultra low dark counts and wide spectrum sensitivity. These natures are indispensable for the evaluation of ultra-broadband parametric fluorescence, which are used for the quantum optical coherence tomography and novel optical non-linear experiments. Here we report the spectral dependence of the detection efficiency of a meander type SNSPD device, having reduced strip width of 50 nm, over a wide spectrum range up to near infra-red wavelength. The fiber coupled, meander type device was fabricated using 6 nm thick Niobium nitride (NbN) nanowires of reduced strip width, 50 nm, patterned over a MgO substrate with active area of 10 x 10 μm2. A maximum efficiency of 32% at 500 nm, 30% at 600 nm, 16% at 800 nm, 10% at 1000 nm, and 1% at 1550 nm with the normalized bias current of 0.95 (bias 37 μA ) was observed at 4.2 K. The salient feature of the device is, it exhibits a very low dark count rate (DCR) of only 2 Hz at the standard operating bias of 37 μA and ultra low DCR of 0.01Hz at 34 μA. Moreover, at this reduced bias with 0.01Hz DCR, the detection efficiency is not appreciably decreased in the visible region (32% at 500 nm and 30% at 600 nm) and an order decrease is observed (0.1%) at 1550 nm. The noise equivalent power (NEP) is of the order 10-19 WHz-1/2 in the visible region and 10-17 WHz- 1/2 in the near IR region. Ultra-broad band parametric fluorescence of band width from 791 nm to 1610 nm generated by a quasi-phase matched (QPM) device was successfully detected with this SSPD.
We report the fabrication of a superconducting nanowire single-photon detector (SSPD or SNSPD) with an ultralow dark count rate. By introducing optical band-pass filters at the input of the SSPD and cooling the filters at 3 K, the dark count rate is reduced to less than 1/100 at low bias. An SSPD with 0.1 cps dark count rate and 5.6% system detection efficiency at 1550 nm wavelength is obtained. We show that a quantum key distribution (QKD) over 300 km of fiber is possible based on a numerical calculation assuming a differential phase shift QKD protocol implemented with our SSPDs.
We report on the performance of a fiber-coupled superconducting nanowire single-photon detector (SNSPD) from 4 K down to the ultralow temperature of 16 mK for a 1550 nm wave length. The system detection efficiency (DE) increased with de creasing the temperature and reached the considerably high value of 15% with a dark count rate less than 100 cps below 1.5 K, even without an optical cavity structure. We also observed saturation of the system DE in its bias current dependency at 16 mK, which indicates that the device DE of our SNSPD nearly reached intrinsic DE despite the device having a large active area of 20 μm × 20 μm. The dark count was finite even at 16 mK and the black body radiation becomes its dominant origin in the low temperatures for fiber-coupled devices.
Abstract Superconducting nanowire single-photon detectors (SNSPDs) with both high system detection efficiency (SDE) and low dark count rate (DCR) play significant roles in quantum information processes and various applications. The background dark counts of SNSPDs originate from the room temperature blackbody radiation coupled to the device via a fiber. Therefore, a bandpass filter (BPF) operated at low temperature with minimal insert loss is necessary to suppress the background DCR. Herein, a low-loss BPF integrated on a single-mode fiber end-face was designed, fabricated and verified for the low temperature implement. The fiber end-face BPF was featured with a typical passband width about 40 nm in the 1550 nm telecom band and a peak transmittance of over 0.98. SNSPD with high SDE fabricated on a distributed Bragg reflector was coupled to the BPF. The device with such a BPF showed an SDE of 80% at a DCR of 0.5 Hz, measured at 2.1 K. Compared the same device without a BPF, the DCR was reduced by over 13 dB with an SDE decrease of <3%.
Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.
We present the performances of a superconducting nanowire single-photon detector (SNSPD) in an ultralow-temperature region from 16 mK to 4 K. The system detection efficiency of the SNSPD showed saturation in the bias-current and temperature dependences, and reached the considerably high value of 15% for 100 Hz dark count rate below 1.4 K at a wavelength of 1550 nm even without an optical cavity structure. We found that the dark count exists even at 16 mK and black body radiation becomes its dominant origin in the low temperatures for fiber-coupled devices.