Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Intense SrF radical beam for molecular cooling experiments

Ming-Feng Tu, Jia-Jung Ho, Chih‐Chiang Hsieh, Ying-Cheng Chen

Published Nov 1, 2009• 7 citations
Publisher

Abstract

We have developed a continuous SrF radical beam for the loading of helium buffer gas cooling. The SrF molecules are efficiently generated by high-temperature chemical reaction of the solid precursor SrF(2) with boron in a graphite oven. The beam properties are characterized with laser-induced fluorescence spectroscopic method. We obtain a molecular flux of up to 2.1x10(15) sr(-1) s(-1) at the detection region for all rotational states. The dependence of the flux on oven temperature suggests that even higher flux is possible if a higher temperature in the oven is achieved.

DOI
10.1063/1.3262631

Related papers

A bright, slow cryogenic molecular beam source for free radicals

John F. Barry, E. S. Shuman, D. DeMille

We demonstrate and characterize a cryogenic buffer gas-cooled molecular beam source capable of producing bright beams of free radicals and refractory species. Details of the beam properties (brightness, forward velocity distribution, transverse velocity spread, rotational and vibrational temperatures) are measured under varying conditions for the molecular species SrF. Under typical conditions we produce a beam of brightness 1.2 × 10(11) molecules/sr/pulse in the X(2)Σ(+)(v = 0, N(rot) = 0) state, with 140(m/s) forward velocity and a rotational temperature of ≈ 1 K. This source compares favorably to other methods for producing beams of free radicals and refractory species for many types of experiments. We provide details of construction that may be helpful for others attempting to use this method.

arXiv:1101.4229•Physical Chemistry Chemical Physics•Jan 1, 2011•93 citations

Bright, continuous beams of cold free radicals

Jamie Shaw, Daniel McCarron

We demonstrate a cryogenic buffer gas-cooled molecular beam source capable of producing bright, continuous beams of cold and slow free radicals via laser ablation over durations of up to 60 seconds. The source design uses a closed liquid helium reservoir as a large thermal mass to minimize heating and ensure reproducible beam properties during operation. Under typical conditions, the source produces beams of our test species SrF, containing $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ molecules per steradian per second in the $X{\phantom{\rule{0.16em}{0ex}}}^{2}\mathrm{\ensuremath{\Sigma}}(v=0,N=1)$ state with a rotational temperature of 1.0(2) K and a forward velocity of $140\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}$. The beam properties are robust and unchanged for multiple cell exit geometries, but depend critically on the helium buffer gas flow rate, which must be $\ensuremath{\ge}10$ standard cubic centimeters per minute to produce bright, continuous beams of molecules for an ablation repetition rate of 55 Hz.

arXiv:2008.00535•Physical Review A•Oct 21, 2020•18 citations

Intense atomic and molecular beams via neon buffer-gas cooling

David Patterson, Julia Rasmussen, John M. Doyle

We realize a continuous, intense, cold molecular and atomic beam source based on buffer-gas cooling. Hot vapor (up to 600 K) from an oven is mixed with cold (15 K) neon buffer gas, and then emitted into a high-flux beam. The novel use of cold neon as a buffer gas produces a forward velocity distribution and low-energy tail that is comparable to much colder helium-based sources. We expect this source to be trivially generalizable to a very wide range of atomic and molecular species with significant vapor pressure below 1000 K. The source has properties that make it a good starting point for laser cooling of molecules or atoms, cold collision studies, trapping, or nonlinear optics in buffer-gas-cooled atomic or molecular gases. A continuous guided beam of cold deuterated ammonia with a flux of 3 × 10 11 ND 3 molecules s −1 and a continuous free-space beam of cold potassium with a flux of 1 × 10 16 K atoms s −1 are realized.

arXiv:0812.2212•New Journal of Physics•May 14, 2009•82 citations

High-flux and stable MgF molecular beam for one-dimensional Doppler cooling applications

Di Wu, Kang Yan, Jin Wei +4 more

A novel cryogenic MgF molecular beam, characterized by high flux and exceptional stability, has been successfully generated within a helium buffer gas environment. This achievement is facilitated by the innovative use of an in-cell stepper motor, which continuously rotates the sample rod during laser ablation. Through meticulous optimization of the ablation laser energy, the position of the ablation spot, and the gas flow rate, among other critical parameters, the resulting MgF beam exhibits a remarkable forward velocity of 209 m/s and an impressive brightness of approximately 1.36 × 1012 molecules per pulse per steradian per internal state. Subsequent attempts at one-dimensional Doppler cooling of the MgF beam have been made, with theoretical calculations closely aligning with experimental outcomes. These findings demonstrate a significant compression in the transverse spatial distribution of the molecular beam, from 7.8 to 6.5 mm, and a substantial cooling of the transverse temperature, from 8.1 to 5.6 mK. This work lays a crucial foundation for the advancement of molecular slowing and magneto-optical trapping techniques for MgF molecules.

Frontiers of Physics•Jan 1, 2025•2 citations

Buffer gas cooling of YbF molecules

Sarah M. Skoff

This thesis reports on the production and characterisation of the first slow and cold beam of YbF molecules using buffer gas cooling. These molecules are being used to measure the electron’s electric dipole moment, and an intense source of slow-moving molecules is desirable for this experiment. The molecules are loaded into a buffer gas cell via laser ablation where they thermalise with cold helium buffer gas. They are then detected inside the cell using laser absorption imaging and spectroscopy on the X2Σ+→A2II1/2 transition. The formation, diffusion and thermalisation dynamics of the molecules inside the cell are studied. Measurements of laser absorption versus intensity reveal that saturation of the absorption is due to a competition between optical pumping into dark states and repopulation of the addressed level by inelastic and velocity-changing collisions. A beam of YbF molecules is extracted through an aperture in the buffer gas cell and characterised using laser induced fluorescence detection. Peak fluxes of 1010 molecules per steradian per pulse, in the rotational and vibrational ground state, are obtained. The translational and rotational temperatures are in equilibrium with the cell temperature of 4 K. The forward velocity of the pulses can be varied between 130 m/s and 200 m/s by changing the buffer gas pressure. This source is an order of magnitude brighter and more than three times slower than a supersonic source of YbF molecules and provides an excellent starting point for improving the measurement of the electron’s electric dipole moment and for deceleration and trapping experiments. In order to reduce the helium load on the vacuum system and to shorten the molecular pulses, a second set-up, delivering the buffer gas into an open copper cylinder in pulses rather than in a continuous flow,is characterised and shows promising first results.

•Sep 1, 2011•2 citations

Buffer gas cooling of a continuous CO molecular beam

Aman Gangwar, Tommaso Vedovello, Francesco Pio Merafina +5 more

We characterize a continuous buffer gas cooled source using CO molecules. We show results about the source performance considering different parameters, like gas flow rate, nozzle size, and internal cell volume. The beam contains 2.5 × 10 14 molecules/(s sr) at about 160 m/s. Moreover, for two rotational states we observe an unexpected population distribution that we tentatively attribute to a lower temperature inside the cell. Considering the importance of buffer-gas cooling for experiments on ultracold molecules prepared with direct laser cooling, we believe that our work will improve this key first-stage cooling, accelerating the adoption of molecules in the framework of quantum technologies.

Optics Express•Jun 4, 2025•2 citations
We have developed a continuous SrF radical beam for the loading of helium buffer gas cooling. The SrF molecules are efficiently generated by high-temperature chemical reaction of the solid precursor SrF(2) with boron in a graphite oven. The beam properties are characterized with laser-induced fluorescence spectroscopic method. We obtain a molecular flux of up to 2.1x10(15) sr(-1) s(-1) at the detection region for all rotational states. The dependence of the flux on oven temperature suggests that even higher flux is possible if a higher temperature in the oven is achieved.
We demonstrate and characterize a cryogenic buffer gas-cooled molecular beam source capable of producing bright beams of free radicals and refractory species. Details of the beam properties (brightness, forward velocity distribution, transverse velocity spread, rotational and vibrational temperatures) are measured under varying conditions for the molecular species SrF. Under typical conditions we produce a beam of brightness 1.2 × 10(11) molecules/sr/pulse in the X(2)Σ(+)(v = 0, N(rot) = 0) state, with 140(m/s) forward velocity and a rotational temperature of ≈ 1 K. This source compares favorably to other methods for producing beams of free radicals and refractory species for many types of experiments. We provide details of construction that may be helpful for others attempting to use this method.
We demonstrate a cryogenic buffer gas-cooled molecular beam source capable of producing bright, continuous beams of cold and slow free radicals via laser ablation over durations of up to 60 seconds. The source design uses a closed liquid helium reservoir as a large thermal mass to minimize heating and ensure reproducible beam properties during operation. Under typical conditions, the source produces beams of our test species SrF, containing $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ molecules per steradian per second in the $X{\phantom{\rule{0.16em}{0ex}}}^{2}\mathrm{\ensuremath{\Sigma}}(v=0,N=1)$ state with a rotational temperature of 1.0(2) K and a forward velocity of 140m/s140\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}140m/s. The beam properties are robust and unchanged for multiple cell exit geometries, but depend critically on the helium buffer gas flow rate, which must be $\ensuremath{\ge}10$ standard cubic centimeters per minute to produce bright, continuous beams of molecules for an ablation repetition rate of 55 Hz.
We realize a continuous, intense, cold molecular and atomic beam source based on buffer-gas cooling. Hot vapor (up to 600 K) from an oven is mixed with cold (15 K) neon buffer gas, and then emitted into a high-flux beam. The novel use of cold neon as a buffer gas produces a forward velocity distribution and low-energy tail that is comparable to much colder helium-based sources. We expect this source to be trivially generalizable to a very wide range of atomic and molecular species with significant vapor pressure below 1000 K. The source has properties that make it a good starting point for laser cooling of molecules or atoms, cold collision studies, trapping, or nonlinear optics in buffer-gas-cooled atomic or molecular gases. A continuous guided beam of cold deuterated ammonia with a flux of 3 × 10 11 ND 3 molecules s −1 and a continuous free-space beam of cold potassium with a flux of 1 × 10 16 K atoms s −1 are realized.
A novel cryogenic MgF molecular beam, characterized by high flux and exceptional stability, has been successfully generated within a helium buffer gas environment. This achievement is facilitated by the innovative use of an in-cell stepper motor, which continuously rotates the sample rod during laser ablation. Through meticulous optimization of the ablation laser energy, the position of the ablation spot, and the gas flow rate, among other critical parameters, the resulting MgF beam exhibits a remarkable forward velocity of 209 m/s and an impressive brightness of approximately 1.36 × 1012 molecules per pulse per steradian per internal state. Subsequent attempts at one-dimensional Doppler cooling of the MgF beam have been made, with theoretical calculations closely aligning with experimental outcomes. These findings demonstrate a significant compression in the transverse spatial distribution of the molecular beam, from 7.8 to 6.5 mm, and a substantial cooling of the transverse temperature, from 8.1 to 5.6 mK. This work lays a crucial foundation for the advancement of molecular slowing and magneto-optical trapping techniques for MgF molecules.
This thesis reports on the production and characterisation of the first slow and cold beam of YbF molecules using buffer gas cooling. These molecules are being used to measure the electron’s electric dipole moment, and an intense source of slow-moving molecules is desirable for this experiment. The molecules are loaded into a buffer gas cell via laser ablation where they thermalise with cold helium buffer gas. They are then detected inside the cell using laser absorption imaging and spectroscopy on the X2Σ+→A2II1/2 transition. The formation, diffusion and thermalisation dynamics of the molecules inside the cell are studied. Measurements of laser absorption versus intensity reveal that saturation of the absorption is due to a competition between optical pumping into dark states and repopulation of the addressed level by inelastic and velocity-changing collisions. A beam of YbF molecules is extracted through an aperture in the buffer gas cell and characterised using laser induced fluorescence detection. Peak fluxes of 1010 molecules per steradian per pulse, in the rotational and vibrational ground state, are obtained. The translational and rotational temperatures are in equilibrium with the cell temperature of 4 K. The forward velocity of the pulses can be varied between 130 m/s and 200 m/s by changing the buffer gas pressure. This source is an order of magnitude brighter and more than three times slower than a supersonic source of YbF molecules and provides an excellent starting point for improving the measurement of the electron’s electric dipole moment and for deceleration and trapping experiments. In order to reduce the helium load on the vacuum system and to shorten the molecular pulses, a second set-up, delivering the buffer gas into an open copper cylinder in pulses rather than in a continuous flow,is characterised and shows promising first results.
We characterize a continuous buffer gas cooled source using CO molecules. We show results about the source performance considering different parameters, like gas flow rate, nozzle size, and internal cell volume. The beam contains 2.5 × 10 14 molecules/(s sr) at about 160 m/s. Moreover, for two rotational states we observe an unexpected population distribution that we tentatively attribute to a lower temperature inside the cell. Considering the importance of buffer-gas cooling for experiments on ultracold molecules prepared with direct laser cooling, we believe that our work will improve this key first-stage cooling, accelerating the adoption of molecules in the framework of quantum technologies.