Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Transverse effects in coherently driven nonlinear cavities

Paul Mandel, Miltos Georgiou, Thomas Erneux

Published May 1, 1993• 83 citations
Publisher

Abstract

We derive reduced field equations describing two cases of optical cavities driven by an external coherent field, taking into account the influence of transverse effects. For the passive-cavity case, we focus on the transistor characteristic and the onset of optical bistability. We prove that, depending on the sign of the detuning, different equations are needed. A global description of the field is possible in terms of a generalized Ginzburg-Landau equation, unless the detuning is finite and positive. That case requires a modal expansion. Furthermore, the good-cavity limit is regular, implying the same differentiation according to the sign of the detuning. For the active-cavity case, the same dependence on the sign of the detuning is found. A global description is obtained only for negative detunings. The good-cavity limit is described by a unique equation for all detunings.

DOI
10.1103/physreva.47.4277

Related papers

Transverse effects in optical bistability

Paul Mandel

In this chapter, we remove one assumption that has been implicit since the beginning of this book, namely the unidimensional aspect of the cavity. We now take into account the transverse variation of the field in the resonant cavity. In dealing with transverse effects, there are two possible approaches, very much like in the multimode optical bistability (OB) studied in Chapter 6. One possibility is to project the Maxwell–Bloch equations on a suitable basis. In the introduction of Chapter 6, the difficulty of selecting this suitable basis was explained for 1-D cavities. This difficulty is amplified by the transverse dimensions, especially because of the lateral boundaries. The other approach is to derive global equations (that are still partial differential equations) for slowly varying amplitudes. They are generally variants of well-known nonlinear partial differential equations of mathematical physics, and therefore a large number of results are directly available. However, when transferring results from another domain to optics, some care must be exercised because the relevant domains of parameters are not always compatible. The classic example is the canonical set of parameters for the Lorenz equations that includes b = γ ║ /γ ⊥ = 8/3 whereas for atomic transitions the upper bound of b is 2. The reader will find a wealth of results, mostly for the modal expansions, in the special issues and reviews [1]–[4]. A review more specifically oriented toward the global amplitude equations is found in [5] and a mathematical study of these equations is presented in [6].

Cambridge University Press eBooks•Jan 13, 1997•0 citations

Transverse patterns in nascent optical bistability

Mustapha Tlidi, Miltos Georgiou, Paul Mandel

We study the Swift-Hohenberg equation describing a passive optical cavity driven by an external coherent field, valid close to the onset of optical bistability. A linear analysis shows that the system can sustain nontrivial stationary structures for small positive detunings. A weakly nonlinear analysis in the vicinity of the instability points reveals the existence of stable hexagonal structures which eventually give way to rolls. Numerical simulations support such a bifurcation scenario.

Physical Review A•Dec 1, 1993•90 citations

Free-Space Diffraction Effects in AN all Optical Passive Driven System

Darlena J. Jones

Transverse effects are known to play a central role in nonlinear-optical systems.Since experiments are generally performed with lasers with finite transverse dimensions, the transverse nature of the field must be considered.Experimental evidence, for example, indicates that mechanisms in the form of diffusive and diffractive coupling within the medium, free-space diffraction, or some combination of these, can create transverse structures which are important in optical bistability and self-focusing/defocusing.In particular, transverse coupling is attributed to such phenomena as radial dependence of the switch up times of bistable loops, spatial hysteresis, and the formation of solitary waves in passive systems.The dynamical effects of free-space diffraction in a unidirectional ring cavity containing a thin resonant absorber driven by an external coherent signal is considered.Minimal focusing effects exist in this system by incorporating a thin medium whose width is small compared to the cavity length and Raleigh range.There is no restriction on the medium response time relative to the round trip time; i.e. the time-dependent polarization is not adiabatically eliminated from the equations of motion.Free-space diffraction effects are isolated and diffraction and diffusive coupling within the medium is negligible.In this model where free-space diffraction is the dominant mechanism for changing the field profile in the system, shifting, deformation, and radial variation of the bistable loop and spatial hysteresis is attributed to an inherent dispersion induced by the free-space diffraction.

•Jan 1, 1993•0 citations

Optical bistability and soliton switching in an optical ring cavity

Eric Curtis John Oliver

This thesis presents the theory of the driven optical ring cavity containing a nonlinear material. First, an overview of the history of bistability and spatial solitons in driven nonlinear cavities is outlined. Then, the basic theory of the optical Kerr effect is presented and two of its consequences are outlined: optical bistability and spatial solitons. Within this background, the mirror feedback model is derived from the Maxwell-Bloch equations and considerations of the classical optics of the cavity. This model is analytically shown to exhibit bistability in the plane wave case. The mean-field model is subsequently derived by applying the mean-field limit to the Maxwell-Bloch equations and the cavity optics. In addition, the mean-field model is analytically shown to exhibit bistability in the plane wave case. Numerical simulations are performed on the mean-field model demonstrating the existence of: (i) plane wave bistability, (ii) transverse modulational bistability, (iii) the ability to “switch†between bistable states in both the plane wave and modulated case, (iv) instabilities in the modulated case and (v) the possibility for optimization of the switching process. Finally, an application of bistable driven cavities is explored: an all-optical digital information processor and storage device.

•Jan 1, 2004•0 citations

Transverse effects and noise in optical instabilities

L. A. Lugiato, R. J. Horowicz, G. Strini +1 more

Abstract We analyse the simplest model that describes the dynamics of a two-level, optically bistable system in a ring cavity, and incorporates a Gaussian radial variation of the electric field. We find that the most favourable situation to achieve self-pulsing instabilities is that of atomic and cavity detunings with opposite sign. The results are compared with those of plane-wave theory. We show that noise plays a primary role at the onset of self-oscillatory instabilities, and that its effects are governed by an equation formally identical to the Risken equation for the laser.

Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences•Dec 18, 1984•6 citations

A nonlinear passive ring cavity: optical bistability

Luigi A. Lugiato, Franco Prati, Massimo Brambilla

In Chapter 9 we discussed the case of a nonlinear cavity containing an active medium. In this framework, the outstanding phenomenon which arises is laser emission, and we calculated the stationary solutions for the ring laser. In this chapter, instead, we turn our attention to the passive nonlinear cavity and in this framework the outstanding phenomenon is optical bistability , i.e. the existence of two distinct stable stationary states that coexist for the same fixed values of the parameters in play. This phenomenon can arise also in the case of an active system contained in a cavity, as we have already noted in Section 9.1 and as we will discuss further in connection with the laser with injected signal, but it became popular from the studies of nonlinear passive optical cavities in the 1970s and 1980s. In contrast to the laser case, in the passive configuration we use an input coherent field, which is injected into the cavity. We discussed this case in Chapter 8 and derived a general equation for the transmission of the cavity (Eq. (8.23)), which we used for an empty cavity and for a linear cavity in Sections 8.4 and 8.5, respectively. In this chapter we will discuss the full nonlinear configuration. It is customary to identify two extreme cases of optical bistability called absorptive optical bistability and dispersive or refractive optical bistability . In both cases an essential ingredient to obtain the bistable behavior is the feedback action exerted by the mirrors of the cavity. In the purely absorptive configuration, in which there is exact resonance among the frequencies of the input field, of the atoms and of the cavity, the other essential ingredient is the saturable nonlinearity of the absorption. In the dispersive case, instead, the main feature is the nonlinearity of the refractive index. These two cases will be illustrated in Sections 11.1 and 11.2, respectively, both “exactly” and in the low-transmission limit.

Cambridge University Press eBooks•Feb 28, 2015•0 citations
We derive reduced field equations describing two cases of optical cavities driven by an external coherent field, taking into account the influence of transverse effects. For the passive-cavity case, we focus on the transistor characteristic and the onset of optical bistability. We prove that, depending on the sign of the detuning, different equations are needed. A global description of the field is possible in terms of a generalized Ginzburg-Landau equation, unless the detuning is finite and positive. That case requires a modal expansion. Furthermore, the good-cavity limit is regular, implying the same differentiation according to the sign of the detuning. For the active-cavity case, the same dependence on the sign of the detuning is found. A global description is obtained only for negative detunings. The good-cavity limit is described by a unique equation for all detunings.
In this chapter, we remove one assumption that has been implicit since the beginning of this book, namely the unidimensional aspect of the cavity. We now take into account the transverse variation of the field in the resonant cavity. In dealing with transverse effects, there are two possible approaches, very much like in the multimode optical bistability (OB) studied in Chapter 6. One possibility is to project the Maxwell–Bloch equations on a suitable basis. In the introduction of Chapter 6, the difficulty of selecting this suitable basis was explained for 1-D cavities. This difficulty is amplified by the transverse dimensions, especially because of the lateral boundaries. The other approach is to derive global equations (that are still partial differential equations) for slowly varying amplitudes. They are generally variants of well-known nonlinear partial differential equations of mathematical physics, and therefore a large number of results are directly available. However, when transferring results from another domain to optics, some care must be exercised because the relevant domains of parameters are not always compatible. The classic example is the canonical set of parameters for the Lorenz equations that includes b = γ ║ /γ ⊥ = 8/3 whereas for atomic transitions the upper bound of b is 2. The reader will find a wealth of results, mostly for the modal expansions, in the special issues and reviews [1]–[4]. A review more specifically oriented toward the global amplitude equations is found in [5] and a mathematical study of these equations is presented in [6].
Transverse effects are known to play a central role in nonlinear-optical systems.Since experiments are generally performed with lasers with finite transverse dimensions, the transverse nature of the field must be considered.Experimental evidence, for example, indicates that mechanisms in the form of diffusive and diffractive coupling within the medium, free-space diffraction, or some combination of these, can create transverse structures which are important in optical bistability and self-focusing/defocusing.In particular, transverse coupling is attributed to such phenomena as radial dependence of the switch up times of bistable loops, spatial hysteresis, and the formation of solitary waves in passive systems.The dynamical effects of free-space diffraction in a unidirectional ring cavity containing a thin resonant absorber driven by an external coherent signal is considered.Minimal focusing effects exist in this system by incorporating a thin medium whose width is small compared to the cavity length and Raleigh range.There is no restriction on the medium response time relative to the round trip time; i.e. the time-dependent polarization is not adiabatically eliminated from the equations of motion.Free-space diffraction effects are isolated and diffraction and diffusive coupling within the medium is negligible.In this model where free-space diffraction is the dominant mechanism for changing the field profile in the system, shifting, deformation, and radial variation of the bistable loop and spatial hysteresis is attributed to an inherent dispersion induced by the free-space diffraction.
This thesis presents the theory of the driven optical ring cavity containing a nonlinear material. First, an overview of the history of bistability and spatial solitons in driven nonlinear cavities is outlined. Then, the basic theory of the optical Kerr effect is presented and two of its consequences are outlined: optical bistability and spatial solitons. Within this background, the mirror feedback model is derived from the Maxwell-Bloch equations and considerations of the classical optics of the cavity. This model is analytically shown to exhibit bistability in the plane wave case. The mean-field model is subsequently derived by applying the mean-field limit to the Maxwell-Bloch equations and the cavity optics. In addition, the mean-field model is analytically shown to exhibit bistability in the plane wave case. Numerical simulations are performed on the mean-field model demonstrating the existence of: (i) plane wave bistability, (ii) transverse modulational bistability, (iii) the ability to “switch†between bistable states in both the plane wave and modulated case, (iv) instabilities in the modulated case and (v) the possibility for optimization of the switching process. Finally, an application of bistable driven cavities is explored: an all-optical digital information processor and storage device.
Abstract We analyse the simplest model that describes the dynamics of a two-level, optically bistable system in a ring cavity, and incorporates a Gaussian radial variation of the electric field. We find that the most favourable situation to achieve self-pulsing instabilities is that of atomic and cavity detunings with opposite sign. The results are compared with those of plane-wave theory. We show that noise plays a primary role at the onset of self-oscillatory instabilities, and that its effects are governed by an equation formally identical to the Risken equation for the laser.
In Chapter 9 we discussed the case of a nonlinear cavity containing an active medium. In this framework, the outstanding phenomenon which arises is laser emission, and we calculated the stationary solutions for the ring laser. In this chapter, instead, we turn our attention to the passive nonlinear cavity and in this framework the outstanding phenomenon is optical bistability , i.e. the existence of two distinct stable stationary states that coexist for the same fixed values of the parameters in play. This phenomenon can arise also in the case of an active system contained in a cavity, as we have already noted in Section 9.1 and as we will discuss further in connection with the laser with injected signal, but it became popular from the studies of nonlinear passive optical cavities in the 1970s and 1980s. In contrast to the laser case, in the passive configuration we use an input coherent field, which is injected into the cavity. We discussed this case in Chapter 8 and derived a general equation for the transmission of the cavity (Eq. (8.23)), which we used for an empty cavity and for a linear cavity in Sections 8.4 and 8.5, respectively. In this chapter we will discuss the full nonlinear configuration. It is customary to identify two extreme cases of optical bistability called absorptive optical bistability and dispersive or refractive optical bistability . In both cases an essential ingredient to obtain the bistable behavior is the feedback action exerted by the mirrors of the cavity. In the purely absorptive configuration, in which there is exact resonance among the frequencies of the input field, of the atoms and of the cavity, the other essential ingredient is the saturable nonlinearity of the absorption. In the dispersive case, instead, the main feature is the nonlinearity of the refractive index. These two cases will be illustrated in Sections 11.1 and 11.2, respectively, both “exactly” and in the low-transmission limit.