Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Nb/Al-AlO x /Nb junctions with controllable critical current density for qubit application

Cao Wen-Hui, Haifeng Yu, Ye Tian, Hongwei Yu, Yu-Feng Ren, Chen Geng-Hua, Zhao Shi-Ping

Published Nov 1, 2009• 7 citations
Publisher

Abstract

Nb/Al-AlOx/Nb tunnel junctions with controllable critical current density JC are fabricated using the standard selective Nb etching process. Tunnel barriers are formed in different oxygen exposure conditions (oxygen pressure P and oxidation time t), giving rise to JC ranging from 100 A/cm2 to above 2000 A/cm2. JC shows a familiar linear dependence on P × t in logarithmic scales. We calculate the energy levels of the phase- and flux-type qubits using the achievable junction parameters and show that the fabricated Nb/Al-AlOx/Nb tunnel junctions can be used conveniently for quantum computation applications in the future.

DOI
10.1088/1674-1056/18/11/072

Related papers

Fabrication of high-quality submicron Nb/Al-AlO x /Nb tunnel junctions

Haifeng Yu, Cao Wen-Hui, Zhu Xiao-Bo +6 more

Nb/Al–AlO x /Nb tunnel junctions are often used in the studies of macroscopic quantum phenomena and superconducting qubit applications of the Josephson devices. In this work, we describe a convenient and reliable process using electron beam lithography for the fabrication of high-quality, submicron-sized Nb/Al–AlO x /Nb Josephson junctions. The technique follows the well-known selective Nb etching process and produces high-quality junctions with V m = 100 mV at 2.3 K for the typical critical current density of 2.2 kA/cm 2 , which can be adjusted by controlling the oxygen pressure and oxidation time during the formation of the tunnelling barrier. We present the results of the temperature dependence of the sub-gap current and in-plane magnetic-field dependence of the critical current, and compare them with the theoretical predictions.

Chinese Physics B•Aug 1, 2008•7 citations

Character and fabrication of Al/Al2O3/Al tunnel junctions for qubit application

DanDan Shen, Ran Zhu, Weiwei Xu +5 more

The superconductive Josephson junction is the key device for superconducting quantum computation. We have fabricated Al/Al2O3/Al tunnel junctions using a double angle evaporation method based on a suspended shadow mask. The Al2O3 junction barrier has been formed by introducing pure oxygen into the chamber during the fabrication process. We have adjusted exposure conditions by changing either the oxygen pressure or the oxidizing time during the formation of tunnel barriers to control the critical current density J c and the junction specific resistance R c . Measurements of the leakage in Al/Al2O3/Al tunnel junctions show that the devices are suitable for qubit applications.

Chinese Science Bulletin•Jan 20, 2012•19 citations

Specific capacitance of Nb/AlOx/Nb Josephson junctions with critical current densities in the range of 0.1–18 kA/cm2

Masaaki Maezawa, Masahiro Aoyagi, Hiroshi Nakagawa +2 more

The specific capacitance Cs of Nb/AlOx/Nb Josephson tunnel junction has been measured by means of the superconducting quantum interference device (SQUID) resonance technique. We have investigated the junctions with critical current densities Jc in the range of 0.1–18 kA/cm2 and found that 1/Cs linearly depends on a logarithm of Jc. This suggests that the barrier thickness is moderately uniform in the junction area and increases continuously during growth. The results also show that increasing Jc reduces time constants of the junction.

Applied Physics Letters•Apr 17, 1995•66 citations

Fabrication of ultrasmall Nb-AlOx-Nb Josephson tunnel junctions

John M. Martinis, Ronald H. Ono

We describe a fabrication process to make Nb-AlOx-Nb edge junctions with areas as small as 0.0022 μm2 and with current densities from 10 to 24 000 A/cm2. The junction conductance was low for voltages below the superconducting energy gap which indicates good quality tunnel barriers. Coulomb gap measurements obtained when the junctions were in the normal state were used to find the junction capacitance. Junction capacitance as small as 0.18 fF has been measured.

Applied Physics Letters•Aug 6, 1990•34 citations

Overdamped NbN Josephson Junctions Based on Nb/AlOx/Nb Trilayer Technology

Takao Iwai, Takashi Aoyama, Ryutaro Oke +3 more

We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.

Japanese Journal of Applied Physics•Aug 1, 1999•5 citations

High quality refractory Josephson tunnel junctions utilizing thin aluminum layers

Michael Gurvitch, M. A. Washington, Harold A. Huggins

Preparation of high quality all-refractory Josephson tunnel junctions based on Nb/Al-oxide-Nb and Nb/Al-oxide-Al/Nb structures is reported. Critical currents up to 1300 A/cm2 and Vm values up to 35 mV were obtained. The specific capacitance of these junctions is 0.06±0.02 pF/μm2. Junctions were fabricated using standard photolithography and a new plasma etching process coupled with anodization of Nb.

Applied Physics Letters•Mar 1, 1983•567 citations
Nb/Al-AlOx/Nb tunnel junctions with controllable critical current density JC are fabricated using the standard selective Nb etching process. Tunnel barriers are formed in different oxygen exposure conditions (oxygen pressure P and oxidation time t), giving rise to JC ranging from 100 A/cm2 to above 2000 A/cm2. JC shows a familiar linear dependence on P × t in logarithmic scales. We calculate the energy levels of the phase- and flux-type qubits using the achievable junction parameters and show that the fabricated Nb/Al-AlOx/Nb tunnel junctions can be used conveniently for quantum computation applications in the future.
Nb/Al–AlO x /Nb tunnel junctions are often used in the studies of macroscopic quantum phenomena and superconducting qubit applications of the Josephson devices. In this work, we describe a convenient and reliable process using electron beam lithography for the fabrication of high-quality, submicron-sized Nb/Al–AlO x /Nb Josephson junctions. The technique follows the well-known selective Nb etching process and produces high-quality junctions with V m = 100 mV at 2.3 K for the typical critical current density of 2.2 kA/cm 2 , which can be adjusted by controlling the oxygen pressure and oxidation time during the formation of the tunnelling barrier. We present the results of the temperature dependence of the sub-gap current and in-plane magnetic-field dependence of the critical current, and compare them with the theoretical predictions.
The superconductive Josephson junction is the key device for superconducting quantum computation. We have fabricated Al/Al2O3/Al tunnel junctions using a double angle evaporation method based on a suspended shadow mask. The Al2O3 junction barrier has been formed by introducing pure oxygen into the chamber during the fabrication process. We have adjusted exposure conditions by changing either the oxygen pressure or the oxidizing time during the formation of tunnel barriers to control the critical current density J c and the junction specific resistance R c . Measurements of the leakage in Al/Al2O3/Al tunnel junctions show that the devices are suitable for qubit applications.
The specific capacitance Cs of Nb/AlOx/Nb Josephson tunnel junction has been measured by means of the superconducting quantum interference device (SQUID) resonance technique. We have investigated the junctions with critical current densities Jc in the range of 0.1–18 kA/cm2 and found that 1/Cs linearly depends on a logarithm of Jc. This suggests that the barrier thickness is moderately uniform in the junction area and increases continuously during growth. The results also show that increasing Jc reduces time constants of the junction.
We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.