Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Fabrication of all-NbN Josephson junctions using semiconductive amorphous barriers

Hirotake Yamamori, K Yoshizawa, Akira Fujimaki, Hisao Hayakawa

Published Apr 1, 1996• 8 citations
Publisher

Abstract

Both underdamped junctions and overdamped junctions utilizing semiconductive amorphous a- barriers have been fabricated by controlling the partial pressure of when the a- barrier is sputtered. While a NbN film is generally used as a superconductive electrode, we have used NbN films for both electrodes and barriers to fabricate overdamped junctions. The films for the barrier are an amorphous semiconductor and have high density of localized states. Typical overdamped junctions have of more than and products of 0.5 mV. On the other hand, typical underdamped junctions have critical current density of to and products of about 1.5 mV. The barrier height of the a- barrier is estimated to be about 0.3 eV from the slope of the barrier thickness dependence of critical current . Then, stacked double barrier junctions have been also fabricated.

DOI
10.1088/0953-2048/9/4a/009

Related papers

Niobium nitride Josephson tunnel junctions with oxidized amorphous silicon barriers

Fujitoshi Shinoki, Alexandre Shoji, S. Kosaka +2 more

High-quality NbN/NbN Josephson tunnel junctions have been fabricated by rf sputtering. Tunneling barriers are formed by oxidizing amorphous silicon films produced with rf glow discharge deposition. For patterning the base and counter electrode, sputtered ZnO films are employed as a resist mask. The juncitons are found to have large gaps (2ΔNbN) =4.4 mV), to have low leakage current, and to be quite stable for storage and thermal cyclings.

Applied Physics Letters•Feb 15, 1981•44 citations

NbN Josephson Junctions for Single-Flux-Quantum Circuits

Hiroyuki Akaike, Naoto Naito, Yuki NAGAI +1 more

We describe the fabrication processes and electrical characteristics of two types of NbN junctions. One is a self-shunted NbN/NbNx/AlN/NbN Josephson junction, which is expected to improve the density of integrated circuits; the other is an underdamped NbN/AlNx/NbN tunnel junction with radical-nitride AlNx barriers, which has highly controllable junction characteristics. In the former, the junction characteristics were changed from underdamped to overdamped by varying the thickness of the NbNx layer. Overdamped junctions with a 6-nm-thick NbNx film exhibited a characteristic voltage of Vc =0.8mV and a critical current density of Jc =22A/cm2 at 4.2K. In the junctions with radical-nitride AlNx barriers, Jc could be controlled in the range 0.01-3kA/cm2 by varying the process conditions, and good uniformity of the junction characteristics was obtained.

IEICE Transactions on Electronics•Jan 1, 2011•0 citations

Self-Shunted NbN Junctions With ${\rm NbN}_{x}/{\rm AlN}$ Bilayered Barriers for 4 K Operation

R. Kanada, Y. Nagai, Hiroyuki Akaike +1 more

We report the fabrication and electrical characteristics of self-shunted Josephson junctions consisting of NbN electrodes, an AlN barrier, and an NbNx normal layer for an SFQ circuit application. To fabricate such junctions with a high characteristic voltage V c, we have studied their preparation conditions including the surface treatments of MgO substrates. Junction characteristics at 4 K were dependent on the electrical properties and film thickness of the NbNx layer; the underdamped junctions changed into overdamped ones with an increase in the film thickness. The overdamped junctions showed a characteristic voltage Vc of 0.8 mV and a critical current density Jc of 22 A/cm2 at 4.2 K.

IEEE Transactions on Applied Superconductivity•May 27, 2009•5 citations

Microwave Characteristics of NbN/NbNx/NbN Josephson Junctions for Quantum Voltage Standards

Hirotake Yamamori, Akira Shoji

All NbN Josephson junctions with polycrystalline NbN films for both electrodes and barriers have been fabricated and their microwave characteristics for a quantum voltage standard were investigated. A superconductor and a normal metal were prepared by changing the partial pressure of N2during the rf sputter deposition of NbN films. For the Josephson junctions normal resistance was controlled by changing the partial pressure of N2during the NbNxbarrier deposition, and critical current was controlled by changing barrier thickness. As a result, it was found that the product of current and normal resistance can be optimized to maximize the current range of the constant-voltage step for quantum voltage standards.

Japanese Journal of Applied Physics•Oct 1, 2005•3 citations

Fabrication of all-NbN Josephson tunnel junctions using single crystal NbN films for the base electrodes

Alexandre Shoji

All-NbN Josephson tunnel junctions with sputter-deposited magnesium oxide barriers have been fabricated using single-crystal NbN films for the base electrodes. Fabricated Josephson junctions have shown good tunneling characteristics with large gap voltages (5.6-5.8 mV), narrow gap widths (0.1-0.2 mV, from 30 to 70%), and small subgap leakage currents (V/sub m/=20-30 mV, measured at 3 mV). The results of a measurement of a subgap structure for a fabricated junction suggest that the excess leakage currents of fabricated junctions are due to multiparticle tunneling through locally thin areas in the MgO barriers.

IEEE Transactions on Magnetics•Mar 1, 1991•25 citations

Overdamped NbN Josephson Junctions Based on Nb/AlOx/Nb Trilayer Technology

Takao Iwai, Takashi Aoyama, Ryutaro Oke +3 more

We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.

Japanese Journal of Applied Physics•Aug 1, 1999•5 citations
Both underdamped junctions and overdamped junctions utilizing semiconductive amorphous a- barriers have been fabricated by controlling the partial pressure of when the a- barrier is sputtered. While a NbN film is generally used as a superconductive electrode, we have used NbN films for both electrodes and barriers to fabricate overdamped junctions. The films for the barrier are an amorphous semiconductor and have high density of localized states. Typical overdamped junctions have of more than and products of 0.5 mV. On the other hand, typical underdamped junctions have critical current density of to and products of about 1.5 mV. The barrier height of the a- barrier is estimated to be about 0.3 eV from the slope of the barrier thickness dependence of critical current . Then, stacked double barrier junctions have been also fabricated.
We describe the fabrication processes and electrical characteristics of two types of NbN junctions. One is a self-shunted NbN/NbNx/AlN/NbN Josephson junction, which is expected to improve the density of integrated circuits; the other is an underdamped NbN/AlNx/NbN tunnel junction with radical-nitride AlNx barriers, which has highly controllable junction characteristics. In the former, the junction characteristics were changed from underdamped to overdamped by varying the thickness of the NbNx layer. Overdamped junctions with a 6-nm-thick NbNx film exhibited a characteristic voltage of Vc =0.8mV and a critical current density of Jc =22A/cm2 at 4.2K. In the junctions with radical-nitride AlNx barriers, Jc could be controlled in the range 0.01-3kA/cm2 by varying the process conditions, and good uniformity of the junction characteristics was obtained.
Self-Shunted NbN Junctions With NbNx/AlN{\rm NbN}_{x}/{\rm AlN}NbNx​/AlN Bilayered Barriers for 4 K Operation
We report the fabrication and electrical characteristics of self-shunted Josephson junctions consisting of NbN electrodes, an AlN barrier, and an NbNx normal layer for an SFQ circuit application. To fabricate such junctions with a high characteristic voltage V c, we have studied their preparation conditions including the surface treatments of MgO substrates. Junction characteristics at 4 K were dependent on the electrical properties and film thickness of the NbNx layer; the underdamped junctions changed into overdamped ones with an increase in the film thickness. The overdamped junctions showed a characteristic voltage Vc of 0.8 mV and a critical current density Jc of 22 A/cm2 at 4.2 K.
All NbN Josephson junctions with polycrystalline NbN films for both electrodes and barriers have been fabricated and their microwave characteristics for a quantum voltage standard were investigated. A superconductor and a normal metal were prepared by changing the partial pressure of N2during the rf sputter deposition of NbN films. For the Josephson junctions normal resistance was controlled by changing the partial pressure of N2during the NbNxbarrier deposition, and critical current was controlled by changing barrier thickness. As a result, it was found that the product of current and normal resistance can be optimized to maximize the current range of the constant-voltage step for quantum voltage standards.
All-NbN Josephson tunnel junctions with sputter-deposited magnesium oxide barriers have been fabricated using single-crystal NbN films for the base electrodes. Fabricated Josephson junctions have shown good tunneling characteristics with large gap voltages (5.6-5.8 mV), narrow gap widths (0.1-0.2 mV, from 30 to 70%), and small subgap leakage currents (V/sub m/=20-30 mV, measured at 3 mV). The results of a measurement of a subgap structure for a fabricated junction suggest that the excess leakage currents of fabricated junctions are due to multiparticle tunneling through locally thin areas in the MgO barriers.
We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.