Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

physica status solidi (a)

Dipole–dipole interaction in nanoscale photonic quantum wells

Mahi R. Singh

Published Apr 21, 2009• 3 citations
Publisher

Abstract

Abstract The dipole–dipole interaction (DDI) has been studied in photonic quantum wells are simulated from two photonic crystals say A and B. An ensemble of nanoparticles is doped within the quantum well layer. Nanoparticles are interacting with each other via DDI. The absorption spectrum has been calculated by using the time dependent Schrodinger equation method. A probe field is applied to measure the absorption spectrum. Numerical simulations for the absorption coefficient have been performed. It has been found that in the absence of DDI the spectrum has two peaks and a minimum at zero detuning. However, in the presence of the large DDI coupling both peaks disappear and a large minimum appears. This means that the positions and heights of peaks can be changed due to DDI interaction. This study can be used to make new types of optical devices. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

DOI
10.1002/pssa.200881342

Related papers

All‐photonic switching in nanophotonic quantum wells

Mahi R. Singh

Abstract We have studied the absorption phenomenon in photonic quantum wells doped with an ensemble of three‐level nanoparticles. Photons are confined in the quantum well due to the band structure engineering. The bound states of the confined photon are calculated by using the transfer matrix method and it is found that the number of bound states in the quantum well depends on the size and the depth of the quan tum well. A probe lasers is applied to monitor the absorption spectrum. Nanoparticles are interacting with the bound photons within the quantum well. It is found that when the resonance energy of nanoparticles lies near the ground bound state, the system becomes transparent. These properties can be used to make new types of optoelectronic devices. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

physica status solidi (a)•Apr 21, 2009•2 citations

Study of nonlinear effects in photonic crystals doped with nanoparticles

Mahi R. Singh

A theory of nonlinear phenomena has been developed for a photonic crystal in the presence of a pump and a coupling laser field. The crystal is doped with an ensemble of four-level nanoparticle impurities. It is considered that the impurity particles are not only interacting with the photonic crystal but also with each other via dipole-dipole interaction. An expression for the susceptibility has been obtained using the density matrix method. The nonlinear effects due to the coupling and the pump fields have been included in the formulation. The absorption spectrum has been calculated in the presence of the strong coupling and pump fields for an isotropic photonic crystal made from dielectric spheres. The photonic crystal has a gap to midgap ratio of about 21%. It is predicted that the absorption spectrum in the photonic crystal can have zero, one, two or three absorptionless states by tuning one of the transition energies within the bands. This is an interesting phenomenon which can be used to make photonic switching devices. We have also calculated the absorption spectrum in the presence of the dipole-dipole interaction. It is found that a symmetric absorption spectrum changes to an asymmetric one due to this interaction. It is also found that there is a large enhancement in the absorption and the dispersion simultaneously for certain values of the detuning and concentration.

Journal of Physics B Atomic Molecular and Optical Physics•Jun 23, 2008•6 citations

Controlling photon absorption in photonic nanowires via dipole–dipole interaction

Mahi R. Singh

The effect of the dipole-dipole interaction (DDI) on absorption processes has been investigated in photonic nanowires. They are manufactured by embedding a photonic crystal into another crystal. The embedded crystal is doped with an ensemble of three-level quantum dots. A probe field is applied to monitor the absorption coefficient. A control field is applied to induce dipole moments in quantum dots. Owing to these fields dipoles are induced in quantum dots, and they interact with each other via the DDI. Quantum dots also interact with bound photon states of the nanowire via the electron-bound photon interaction. It is found that the system can be switched from a transparent state to an absorbing state through the DDI. The switching mechanism can be controlled by changing the location of a resonant energy in the quantum dots.

Optics Letters•Sep 16, 2009•12 citations

Photon absorption in interacting quantum dots doped in nanofibers

Mahi R. Singh, Daniel G. Schindel

We study the coupling between quantum dots through the dipole–dipole interaction in photonic nanofibers manufactured by embedding a dielectric material into a photonic crystal. The embedded dielectric material is doped with an ensemble of three-level quantum dots. A probe field is applied to monitor the absorption, and a control field is applied to induce dipole moments in quantum dots. Dipoles are induced in quantum dots due to the external fields, and they interact with each other via the dipole–dipole interaction. Quantum dots also interact with the nanofiber through the electron–bound photon interaction. The absorption coefficient has been calculated using the density matrix method, and the dipole–dipole interaction has been evaluated in the mean field approximation. It is found that the absorption spectrum splits from one peak to two peaks by the dipole–dipole interaction. The splitting of peaks can be controlled by either the resonance energy of quantum dots or bound photon states of the nanofiber.

Journal of the Optical Society of America B•Nov 23, 2010•5 citations

Numerical simulations of photon trapping in doped photonic crystals doped with multi‐level atoms

Mahi R. Singh, I. Haque

A theory of photon trapping has been developed in photonic band-gap (PBG) and dispersive polaritonic band-gap (DPBG) materials doped with an ensemble of five-level atoms. These materials have gaps in their photon energy spectra. The atoms are prepared as coherent superpositions of the two lower states and interact with a reservoir and two photon fields. They also interact with each other by dipole-dipole interaction. The Schrödinger equation and the Laplace transform method are used to calculate the expressions for the number densities of the atomic states. Numerical simulations for a PBG material reveal that when the resonance energies lie away from the band edges and within the lower or upper bands, trapping is observed at certain values of the relative Rabi frequency associated with the two fields, which vary depending on the strength of the dipole-dipole interaction between the atoms. Also, if the photon fields are held constant, the population densities of the excited states of the atoms increase with increasing dipole-dipole interaction. These are very interesting phenomena. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Physica status solidi. C, Conferences and critical reviews/Physica status solidi. C, Current topics in solid state physics•May 1, 2005•7 citations

Transparency in nanophotonic quantum wires

Mahi R. Singh

We have studied the quantum optics of a photonic quantum nanowire doped with an ensemble of three-level nanoparticles.The wire is made from two photonic crystals A and B. Crystal A is embedded within crystal B and acts as a photonic nanowire.It is considered that the conduction band of crystal A lies below that of crystal B. As a result, photons are confined in crystal A and are reflected from crystal B. The bound states of the confined photons are calculated using the transfer matrix method.It is found that the number of bound states in the wire depends on the size of the wire and the energy difference between the conduction band extrema of crystals A and B. The absorption coefficient of the system has also been calculated using the Schrödinger equation method.It is considered that the nanoparticles interact with the photonic bound states.Numerical simulations show that when one of the resonance energies lies near the bound state, the system becomes transparent.However, when the resonance energy lies away from the bound state the crystal reverts to an absorbing state.Similarly, when the radius of the dielectric spheres is changed the location of the transparency peak is shifted.This means that the present system can be switched between two states by changing the size of the wire and the transition energy.These findings can be used to make new types of optical devices.

Journal of Physics B Atomic Molecular and Optical Physics•Mar 9, 2009•18 citations
Abstract The dipole–dipole interaction (DDI) has been studied in photonic quantum wells are simulated from two photonic crystals say A and B. An ensemble of nanoparticles is doped within the quantum well layer. Nanoparticles are interacting with each other via DDI. The absorption spectrum has been calculated by using the time dependent Schrodinger equation method. A probe field is applied to measure the absorption spectrum. Numerical simulations for the absorption coefficient have been performed. It has been found that in the absence of DDI the spectrum has two peaks and a minimum at zero detuning. However, in the presence of the large DDI coupling both peaks disappear and a large minimum appears. This means that the positions and heights of peaks can be changed due to DDI interaction. This study can be used to make new types of optical devices. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Abstract We have studied the absorption phenomenon in photonic quantum wells doped with an ensemble of three‐level nanoparticles. Photons are confined in the quantum well due to the band structure engineering. The bound states of the confined photon are calculated by using the transfer matrix method and it is found that the number of bound states in the quantum well depends on the size and the depth of the quan tum well. A probe lasers is applied to monitor the absorption spectrum. Nanoparticles are interacting with the bound photons within the quantum well. It is found that when the resonance energy of nanoparticles lies near the ground bound state, the system becomes transparent. These properties can be used to make new types of optoelectronic devices. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
A theory of nonlinear phenomena has been developed for a photonic crystal in the presence of a pump and a coupling laser field. The crystal is doped with an ensemble of four-level nanoparticle impurities. It is considered that the impurity particles are not only interacting with the photonic crystal but also with each other via dipole-dipole interaction. An expression for the susceptibility has been obtained using the density matrix method. The nonlinear effects due to the coupling and the pump fields have been included in the formulation. The absorption spectrum has been calculated in the presence of the strong coupling and pump fields for an isotropic photonic crystal made from dielectric spheres. The photonic crystal has a gap to midgap ratio of about 21%. It is predicted that the absorption spectrum in the photonic crystal can have zero, one, two or three absorptionless states by tuning one of the transition energies within the bands. This is an interesting phenomenon which can be used to make photonic switching devices. We have also calculated the absorption spectrum in the presence of the dipole-dipole interaction. It is found that a symmetric absorption spectrum changes to an asymmetric one due to this interaction. It is also found that there is a large enhancement in the absorption and the dispersion simultaneously for certain values of the detuning and concentration.
The effect of the dipole-dipole interaction (DDI) on absorption processes has been investigated in photonic nanowires. They are manufactured by embedding a photonic crystal into another crystal. The embedded crystal is doped with an ensemble of three-level quantum dots. A probe field is applied to monitor the absorption coefficient. A control field is applied to induce dipole moments in quantum dots. Owing to these fields dipoles are induced in quantum dots, and they interact with each other via the DDI. Quantum dots also interact with bound photon states of the nanowire via the electron-bound photon interaction. It is found that the system can be switched from a transparent state to an absorbing state through the DDI. The switching mechanism can be controlled by changing the location of a resonant energy in the quantum dots.
We study the coupling between quantum dots through the dipole–dipole interaction in photonic nanofibers manufactured by embedding a dielectric material into a photonic crystal. The embedded dielectric material is doped with an ensemble of three-level quantum dots. A probe field is applied to monitor the absorption, and a control field is applied to induce dipole moments in quantum dots. Dipoles are induced in quantum dots due to the external fields, and they interact with each other via the dipole–dipole interaction. Quantum dots also interact with the nanofiber through the electron–bound photon interaction. The absorption coefficient has been calculated using the density matrix method, and the dipole–dipole interaction has been evaluated in the mean field approximation. It is found that the absorption spectrum splits from one peak to two peaks by the dipole–dipole interaction. The splitting of peaks can be controlled by either the resonance energy of quantum dots or bound photon states of the nanofiber.
A theory of photon trapping has been developed in photonic band-gap (PBG) and dispersive polaritonic band-gap (DPBG) materials doped with an ensemble of five-level atoms. These materials have gaps in their photon energy spectra. The atoms are prepared as coherent superpositions of the two lower states and interact with a reservoir and two photon fields. They also interact with each other by dipole-dipole interaction. The Schrödinger equation and the Laplace transform method are used to calculate the expressions for the number densities of the atomic states. Numerical simulations for a PBG material reveal that when the resonance energies lie away from the band edges and within the lower or upper bands, trapping is observed at certain values of the relative Rabi frequency associated with the two fields, which vary depending on the strength of the dipole-dipole interaction between the atoms. Also, if the photon fields are held constant, the population densities of the excited states of the atoms increase with increasing dipole-dipole interaction. These are very interesting phenomena. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
We have studied the quantum optics of a photonic quantum nanowire doped with an ensemble of three-level nanoparticles.The wire is made from two photonic crystals A and B. Crystal A is embedded within crystal B and acts as a photonic nanowire.It is considered that the conduction band of crystal A lies below that of crystal B. As a result, photons are confined in crystal A and are reflected from crystal B. The bound states of the confined photons are calculated using the transfer matrix method.It is found that the number of bound states in the wire depends on the size of the wire and the energy difference between the conduction band extrema of crystals A and B. The absorption coefficient of the system has also been calculated using the Schrödinger equation method.It is considered that the nanoparticles interact with the photonic bound states.Numerical simulations show that when one of the resonance energies lies near the bound state, the system becomes transparent.However, when the resonance energy lies away from the bound state the crystal reverts to an absorbing state.Similarly, when the radius of the dielectric spheres is changed the location of the transparency peak is shifted.This means that the present system can be switched between two states by changing the size of the wire and the transition energy.These findings can be used to make new types of optical devices.