Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Design of the flux-flow type Josephson oscillator inductively coupled to a stripline impedance transformer

Keisuke Kudo, Keiji Yoshida, Keiji Enpuku, K. Yamafuji

Published Nov 1, 1991• 2 citations
Publisher

Abstract

In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and a stripline impedance transformer, the authors have made a theoretical study of the inductive coupling between FFO and a stripline. It is shown that by choosing the output impedance of the FFO Z o smaller than the characteristic impedance of the coupling section Z 1 , the frequency dependence of the output power at the end of the coupling section can be extremely flat over a large frequency band. A model simulation employing a NbN/Pbin Josephson junction and a Nb/NbN stripline demonstrates that in the case of optimum design Z 0 =0.6 Z 1 , the bandwidth of the coupling section, which is defined by the frequency range where the deviation is within +or-5%, is shown to be as large as 80% of the centre frequency.

DOI
10.1088/0953-2048/4/11/035

Related papers

Inductive coupling of a flux-flow type Josephson oscillator to a stripline

Keiji Yoshida, J. Qin, Keiji Enpuku

A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>

IEEE Transactions on Magnetics•Mar 1, 1989•11 citations

Design and performance of flux-flow type Josephson oscillator coupled to a stripline

Keiji Yoshida, Keisuke Kudo, Keiji Enpuku

In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and an external stripline, the authors carried out experiments to investigate the inductive coupling scheme in a strong coupling regime. By adopting NbN films with large penetration depths as electrodes for strong coupling, they were able to realize coupling sections with a coupling coefficient alpha =M/ square root L/sub 1/L/sub 2/ as large as 0.7, with M, L/sub 1/, and L/sub 2/ being mutual inductance, self-inductances of, the FFO, and the stripline, respectively. Using this design for the coupling, the authors succeeded in detecting AC fields at frequencies around 150 GHz, which were emitted from FFO to the stripline via the coupling section.

IEEE Transactions on Magnetics•Mar 1, 1991•4 citations

Verification of the Model of Inductive Coupling between a Josephson Oscillator and a Stripline

Keisuke Kudo, Keiji Yoshida, Keiji Enpuku +1 more

In order to realize an efficient coupling between a flux-flow-type Josephson oscillator (FFO) and a stripline, we have carried out experiments to verify the mathematical model of the inductive coupling scheme between FFO and a stripline resonator in the frequency range between 50 GHz and 350 GHz. It is shown that the simulation using the proposed equivalent circuit for the inductive coupling scheme well explains the experimental results. The experimentally obtained center frequency and the bandwidth of the matching circuit were as large as 120 GHz and 40 GHz, respectively, which are also in reasonable agreement with those obtained in the simulation.

Japanese Journal of Applied Physics•Jan 1, 1993•0 citations

Linewidth Measurements of Flux-Flow Josephson Oscillators using a CAD Designed Integrated Sub-MM Wave Receiver

Y. M. Zhang, Dag Winkler, T. Claeson

By using a superconducting integrated sub-mm wave receiver, the linewidth of a flux-flow type Josephson oscillator (FFO) was measured to be less than 2.1 MHz in the band 280-330 GHz. The output power coupled to a 10 i2 microstripline was about 0.5 jiW, and could be adjusted by changing the current bias of the oscillator junction. The integrated receiver consists of two identical Josephson flux-flow oscillators and an SIS (superconductor-insulator-superconductor) mixer. We can determine the composite linewidth of the oscillators by mixing them down to an intermediate frequency in the 515 mixer. The FPOs are connected to the SIS mixer via centerfed interdigital capacitors. One FFO is well coupled to the SIS mixer by using a 3-step Chebychev rnicrostripline transformer and a fairly large interdigital capacitor, while the second H0 has about 15 20 dB weaker coupling. A strip inductor, rf-terminated by a radial stub resonates out the SIS junction capacitance at about 340 GHz. Radial stubs were also used as RF chokes for the if-line (4 GHz). The FFOs and the SIS element are made of Nb/Nb-oxide/PbBi tunnel junctions. The circuit was optimized by careful CAD modeling (HP Microwave Design System). Normal conductors were used with the resistivity set to zero. Microstripline widths and lengths were recalculated for the superconducting case with the London penetration depths of the electrodes (Nb and PbBi) taken into account. After adjusting the area of the SIS element and the length of the tuning strip inductor, a good response was observed from 280 to 330 GHz, with the LC resonance at 340 GHz. The power was high enough to pump the SIS mixer.

Softwaretechnik-Trends•Apr 1, 1993•1 citation

Radiation power of NbN-based flux-flow oscillators for THz-band integrated SIS receivers

Satoshi Kohjiro, Zhen Wang, S. V. Shitov +3 more

To develop an efficient local oscillator (LO) integrated with a SIS mixer operating above the gap frequency of Nb, we have investigated the radiation power P of NbN-based flux-flow-type Josephson oscillators (FFO's). The designed and fabricated chip incorporates FFO's, SIS power detectors (DET's), and their coupling circuits. Both FFO's and DET's consist of epitaxial NbN/AlN/NbN junctions with high critical current density J/sub C/ (15200 nW, enough for the optimum pumping of a SIS mixer with rf-resistance of 50 /spl Omega/, is coupled to DET's for 0.5-0.9 THz. The coupling bandwidth is larger than 20% of its central frequency. In the band, the radiation frequency is tuned by the control current through the FFO of 10-100 mA. The maximum coupling frequency of the present experiment is quantitatively agreed with the theoretical one. The peak power of 1.3 /spl mu/W is detected at 0.76 THz. The dissipated power in a FFO is smaller than 500 /spl mu/W, which is 10/sup -4/ times less than that of semiconductor sources. These results indicate the feasibility of NbN-based FFO's for a practical on-chip LO.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•6 citations

Flux-flow-type Josephson oscillator for millimeter and submillimeter wave region. II. Modeling

Tadao Nagatsuma, Keiji Enpuku, Keiji Yoshida +1 more

A theoretical study is made of a travelling-wave-type oscillator, which utilizes a flux flow in a long Josephson junction for use as a local oscillator in the integrated superconducting receiver system. An internal electromagnetic field of the oscillator junction in the flux-flow state is investigated both numerically and analytically. It is shown that the voltage amplitude of the internal oscillation increases gradually in the direction of the flux flow and reaches a maximum value at the junction end. An equivalent circuit of the oscillator is also obtained, which gives dependences of the emitted radiation on frequency, magnetic field, and load. It is shown that the output power attains the value of the order of 10−6 W in the frequency range between 100 and 500 GHz, and that the output power and the radiation frequency can be controlled by both the bias voltage and the applied magnetic field. These theoretical results explain quantitatively the experimental ones with a Pb-alloy long junction of length 24 λJ.

Journal of Applied Physics•Dec 1, 1984•114 citations
In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and a stripline impedance transformer, the authors have made a theoretical study of the inductive coupling between FFO and a stripline. It is shown that by choosing the output impedance of the FFO Z o smaller than the characteristic impedance of the coupling section Z 1 , the frequency dependence of the output power at the end of the coupling section can be extremely flat over a large frequency band. A model simulation employing a NbN/Pbin Josephson junction and a Nb/NbN stripline demonstrates that in the case of optimum design Z 0 =0.6 Z 1 , the bandwidth of the coupling section, which is defined by the frequency range where the deviation is within +or-5%, is shown to be as large as 80% of the centre frequency.
A theoretical and experimental study of the coupling of the flux-flow-type Josephson oscillator (FFO) to an external stripline has been carried out to overcome the large impedance mismatch between them. For efficient coupling and impedance matching at millimeter and submillimeter wavelengths, the authors have proposed a scheme where the Josephson oscillator is inductively coupled to the stripline by a thin superconducting electrode. Theoretical modeling of the coupling section and the design of the stripline impedance-transformer have been carried out. In a preliminary experiment, the authors obtained a power of about 10/sup -7/ W emitted from the FFO into the stripline in the frequency range from 184 GHz to 193 GHz.>
In order to realize efficient coupling between a flux-flow type Josephson oscillator (FFO) and an external stripline, the authors carried out experiments to investigate the inductive coupling scheme in a strong coupling regime. By adopting NbN films with large penetration depths as electrodes for strong coupling, they were able to realize coupling sections with a coupling coefficient alpha =M/ square root L/sub 1/L/sub 2/ as large as 0.7, with M, L/sub 1/, and L/sub 2/ being mutual inductance, self-inductances of, the FFO, and the stripline, respectively. Using this design for the coupling, the authors succeeded in detecting AC fields at frequencies around 150 GHz, which were emitted from FFO to the stripline via the coupling section.
In order to realize an efficient coupling between a flux-flow-type Josephson oscillator (FFO) and a stripline, we have carried out experiments to verify the mathematical model of the inductive coupling scheme between FFO and a stripline resonator in the frequency range between 50 GHz and 350 GHz. It is shown that the simulation using the proposed equivalent circuit for the inductive coupling scheme well explains the experimental results. The experimentally obtained center frequency and the bandwidth of the matching circuit were as large as 120 GHz and 40 GHz, respectively, which are also in reasonable agreement with those obtained in the simulation.
By using a superconducting integrated sub-mm wave receiver, the linewidth of a flux-flow type Josephson oscillator (FFO) was measured to be less than 2.1 MHz in the band 280-330 GHz. The output power coupled to a 10 i2 microstripline was about 0.5 jiW, and could be adjusted by changing the current bias of the oscillator junction. The integrated receiver consists of two identical Josephson flux-flow oscillators and an SIS (superconductor-insulator-superconductor) mixer. We can determine the composite linewidth of the oscillators by mixing them down to an intermediate frequency in the 515 mixer. The FPOs are connected to the SIS mixer via centerfed interdigital capacitors. One FFO is well coupled to the SIS mixer by using a 3-step Chebychev rnicrostripline transformer and a fairly large interdigital capacitor, while the second H0 has about 15 20 dB weaker coupling. A strip inductor, rf-terminated by a radial stub resonates out the SIS junction capacitance at about 340 GHz. Radial stubs were also used as RF chokes for the if-line (4 GHz). The FFOs and the SIS element are made of Nb/Nb-oxide/PbBi tunnel junctions. The circuit was optimized by careful CAD modeling (HP Microwave Design System). Normal conductors were used with the resistivity set to zero. Microstripline widths and lengths were recalculated for the superconducting case with the London penetration depths of the electrodes (Nb and PbBi) taken into account. After adjusting the area of the SIS element and the length of the tuning strip inductor, a good response was observed from 280 to 330 GHz, with the LC resonance at 340 GHz. The power was high enough to pump the SIS mixer.
To develop an efficient local oscillator (LO) integrated with a SIS mixer operating above the gap frequency of Nb, we have investigated the radiation power P of NbN-based flux-flow-type Josephson oscillators (FFO's). The designed and fabricated chip incorporates FFO's, SIS power detectors (DET's), and their coupling circuits. Both FFO's and DET's consist of epitaxial NbN/AlN/NbN junctions with high critical current density J/sub C/ (15200 nW, enough for the optimum pumping of a SIS mixer with rf-resistance of 50 /spl Omega/, is coupled to DET's for 0.5-0.9 THz. The coupling bandwidth is larger than 20% of its central frequency. In the band, the radiation frequency is tuned by the control current through the FFO of 10-100 mA. The maximum coupling frequency of the present experiment is quantitatively agreed with the theoretical one. The peak power of 1.3 /spl mu/W is detected at 0.76 THz. The dissipated power in a FFO is smaller than 500 /spl mu/W, which is 10/sup -4/ times less than that of semiconductor sources. These results indicate the feasibility of NbN-based FFO's for a practical on-chip LO.
A theoretical study is made of a travelling-wave-type oscillator, which utilizes a flux flow in a long Josephson junction for use as a local oscillator in the integrated superconducting receiver system. An internal electromagnetic field of the oscillator junction in the flux-flow state is investigated both numerically and analytically. It is shown that the voltage amplitude of the internal oscillation increases gradually in the direction of the flux flow and reaches a maximum value at the junction end. An equivalent circuit of the oscillator is also obtained, which gives dependences of the emitted radiation on frequency, magnetic field, and load. It is shown that the output power attains the value of the order of 10−6 W in the frequency range between 100 and 500 GHz, and that the output power and the radiation frequency can be controlled by both the bias voltage and the applied magnetic field. These theoretical results explain quantitatively the experimental ones with a Pb-alloy long junction of length 24 λJ.