Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Canadian Journal of Physics

RANDOM DIGIT GENERATION WITH A NOISE SOURCE AND COUNTER

K. A. Steele

Published Jul 1, 1962• 0 citations
Publisher

Abstract

A method of generating random decimal digits with commercially available equipment is described and the effect of operating parameters on the randomness of the digits is discussed. A figure of merit is obtained for the generated sequence which is based on the relative entropies of the actual source and a hypothetical ideal source.
DOI
10.1139/p62-088

Related papers

Harnessing Nature’s Randomness: Physical Random Number Generator

Geraldo A. Barbosa

Random number generators are indispensable for a multi- tude of tasks; from electronic games to secure communications. Most gen- erators have been made either in software or determinist hardwired de- vices such as the Linear-Feedback-Shift-Registers; while gaining in costs or speed, the “random” sequences generated are actually deterministic, obeying clear generating algorithms, despite all randomness appearance of their outputs. From the other side, Nature presents a multitude of sources of true randomness that can be explored. Commercial random generators exist based on physical processes as the source of randomness. Difficulties are always present to extract Nature’s randomness. This paper presents guidelines for construction of a fast (telecommunication speed) Physical Random Number Generator. It discusses the fundamental physical ele- ments involved, technicalities of signal recording and its limitations, and the final bit extraction. The need for randomness tests is emphasized and the impossibility of guaranteeing true randomness of a finite sequence is discussed.

Journal of Information Security and Cryptography (Enigma)•Dec 7, 2015•1 citation

The generation of truly random binary digits

Jan Havel

The Genap III generator has been designed as an accurate, defined source of the random process, and connected with a computer it can be used to generate random processes with continuous as well as discrete time. It is equipped with a physical source of the random process on the one hand, and a pseudorandom linear binary generator on the other. Both generators may be used independently, or their outputs may be mixed.

Journal of Physics E Scientific Instruments•May 1, 1973•1 citation

A Simple Five-Bit Quantum Random Digit Generator

Eric Thompson

Quantum random number generators provide physical randomness by converting intrinsically probabilistic measurement outcomes into usable digital values. This white paper presents a simple five-bit protocol for generating uniformly distributed decimal digits from an ideal 50/50 quantum source. Five independent binary outcomes produce 2⁵ = 32 possible sequences. By rejecting the two extreme runs, 00000 and 11111, exactly 30 admissible sequences remain, allowing a direct uniform mapping onto the ten decimal digits.The main contribution of this note is not entropy-optimal extraction, but transparency: the protocol is easy to inspect, easy to implement, and easy to explain to nontechnical users. This makes it especially relevant for trust-critical public-facing applications where visible fairness may matter more than maximum entropy efficiency. A small efficiency improvement is also introduced. Instead of discarding a rejected extreme run entirely, the rejected all-A or all-B sequence is recycled as a single fair starting bit for the next five-bit candidate block. Under the assumption of independent fair input bits, this carry-forward rule preserves exact decimal uniformity while improving the expected raw-bit cost from 16/3 ≈ 5.333 bits per digit to 79/15 ≈ 5.267 bits per digit.The paper also discusses practical implementation using a beam-splitter-style quantum randomness source, limitations under detector imbalance, and the proper cryptographic positioning of the method. The protocol can serve as a transparent entropy source or educational QRNG digitization scheme, but cryptographic deployment would still require standard health testing, calibration, and extraction.

•May 7, 2026•0 citations

Physical random number generation under noisy observation of entropy source

Arai Kenichi, Jun Muramatsu

IEICE Technical Report; IEICE Tech. Rep.•Mar 7, 2017•0 citations

Photosensitive matrix as a source of entropy

Rostyslav Diachuk, K.M. Dmytrashchuk, Artur Mazurets +2 more

The stochastic nature of photocurrent generation can be used as a source of entropy for various applications in the field of cybersecurity. Cybersecurity software solutions in the field of software engineering, particularly steganography, require random number sequences (RNS) in their algorithms. Standard methods provided by frameworks and programming languages often fail to ensure sufficient randomness. Physical devices measuring stochastic processes, such as beta radiation counters, can provide true unpredictability but are impractical to maintain. As an alternative, a photodiode can be used as an RNS source by measuring its photocurrent. Experiments under near-total darkness (0.1 lux) and uniform illumination (200 lux) confirmed that the current values follow a Gaussian distribution and demonstrate high unpredictability within a defined range. By means of software engineering, a set of continuous photocurrent measurements can be transformed into a sequence of integer random numbers following a Poisson distribution. An experimental setup was developed to investigate this hypothesis and to evaluate the quality of the generated sequences with respect to cybersecurity requirements. This approach enables the development of a cost-effective, accessible, and cryptographically secure hardware random number generator without relying on bulky or expensive equipment.

International Conference on Correlation Optics•Nov 10, 2025•1 citation

Physical-random number generation using a semiconductor laser diode's frequency noise characteristics. -- Influence of lights source characteristics

直博 水谷, Masatoshi Hasegawa, Hideaki Arai +6 more

IEICE Technical Report; IEICE Tech. Rep.•Aug 14, 2014•0 citations
Random number generators are indispensable for a multi- tude of tasks; from electronic games to secure communications. Most gen- erators have been made either in software or determinist hardwired de- vices such as the Linear-Feedback-Shift-Registers; while gaining in costs or speed, the “random” sequences generated are actually deterministic, obeying clear generating algorithms, despite all randomness appearance of their outputs. From the other side, Nature presents a multitude of sources of true randomness that can be explored. Commercial random generators exist based on physical processes as the source of randomness. Difficulties are always present to extract Nature’s randomness. This paper presents guidelines for construction of a fast (telecommunication speed) Physical Random Number Generator. It discusses the fundamental physical ele- ments involved, technicalities of signal recording and its limitations, and the final bit extraction. The need for randomness tests is emphasized and the impossibility of guaranteeing true randomness of a finite sequence is discussed.
Quantum random number generators provide physical randomness by converting intrinsically probabilistic measurement outcomes into usable digital values. This white paper presents a simple five-bit protocol for generating uniformly distributed decimal digits from an ideal 50/50 quantum source. Five independent binary outcomes produce 2⁵ = 32 possible sequences. By rejecting the two extreme runs, 00000 and 11111, exactly 30 admissible sequences remain, allowing a direct uniform mapping onto the ten decimal digits.The main contribution of this note is not entropy-optimal extraction, but transparency: the protocol is easy to inspect, easy to implement, and easy to explain to nontechnical users. This makes it especially relevant for trust-critical public-facing applications where visible fairness may matter more than maximum entropy efficiency. A small efficiency improvement is also introduced. Instead of discarding a rejected extreme run entirely, the rejected all-A or all-B sequence is recycled as a single fair starting bit for the next five-bit candidate block. Under the assumption of independent fair input bits, this carry-forward rule preserves exact decimal uniformity while improving the expected raw-bit cost from 16/3 ≈ 5.333 bits per digit to 79/15 ≈ 5.267 bits per digit.The paper also discusses practical implementation using a beam-splitter-style quantum randomness source, limitations under detector imbalance, and the proper cryptographic positioning of the method. The protocol can serve as a transparent entropy source or educational QRNG digitization scheme, but cryptographic deployment would still require standard health testing, calibration, and extraction.
The stochastic nature of photocurrent generation can be used as a source of entropy for various applications in the field of cybersecurity. Cybersecurity software solutions in the field of software engineering, particularly steganography, require random number sequences (RNS) in their algorithms. Standard methods provided by frameworks and programming languages often fail to ensure sufficient randomness. Physical devices measuring stochastic processes, such as beta radiation counters, can provide true unpredictability but are impractical to maintain. As an alternative, a photodiode can be used as an RNS source by measuring its photocurrent. Experiments under near-total darkness (0.1 lux) and uniform illumination (200 lux) confirmed that the current values follow a Gaussian distribution and demonstrate high unpredictability within a defined range. By means of software engineering, a set of continuous photocurrent measurements can be transformed into a sequence of integer random numbers following a Poisson distribution. An experimental setup was developed to investigate this hypothesis and to evaluate the quality of the generated sequences with respect to cybersecurity requirements. This approach enables the development of a cost-effective, accessible, and cryptographically secure hardware random number generator without relying on bulky or expensive equipment.