Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Japanese Journal of Applied Physics

Laser Cooling of Ca+ with an External-Cavity Ultraviolet Diode Laser

Kazuhiro Hayasaka, Shinji Urabe, Masayoshi Watanabe

Published Jul 1, 2000• 17 citations
Publisher

Abstract

We have built an external-cavity ultraviolet diode laser at 397 nm for Ca+ spectroscopy. The laser consists of a commercial ultraviolet diode laser and a holographic grating in the Littrow configuration. Stable single-mode operation with a power of 3 mW, a linewidth no larger than 2 MHz, and a mode-hop-free frequency scanning range of 15 GHz was achieved. This laser was used to cool a small number of Ca+ in a rf trap. The ions were cooled to a low temperature to form a crystallized state. The use of the laser will simplify experimental setups for diverse applications of Ca+, such as frequency standards, quantum computers and one-atom lasers.

DOI
10.1143/jjap.39.l687

Related papers

A narrow linewidth diode laser system for strontium laser cooling applications

Sarah Nagel

The diode laser system for laser cooling on the 1S 0 → 3P1 intercombination line of strontium discussed in this thesis allows us to cool and trap an atomic strontium sample to 15 muK. Samples in this temperature range are useful for the development of the next generation of atomic frequency standards, cold collision studies, and as a step towards quantum degeneracy. This laser system consists of a Littrow configuration external-cavity diode laser, which is frequency locked to a high finesse cavity. The cavity is subsequently locked to an absorption feature to produce a few mW of tunable, stabilized, single mode power at the target wavelength. We present the design and characterization of this system, including a linewidth measurement of 70 kHz, as well as preliminary results from cooling and trapping.

•Jan 1, 2004•1 citation

Tunable 397 nm Light Source for Laser Cooling of Ca Ions Based on Frequency Doubling of Diode Laser

Kazuhiro Hayasaka, Masayoshi Watanabe, Hidetsuka Imajo +2 more

We have fabricated an rf ion trap and laser-cooling light sources to observe shelving transition in a single calcium ion. All the radiation required for laser cooling and observation of the transition can be prepared with diode lasers in this system. Continuous-wave radiation at 397 nm for laser cooling was generated by frequency doubling of a GaAlAs laser in an external enhancement cavity. As a preliminary experiment for observing the shelving transition, laser cooling of one hundred calcium ions was demonstrated using this radiation and another diode laser.

Japanese Journal of Applied Physics•Mar 1, 1994•10 citations

High-performance frequency stabilization of ultraviolet diode lasers by using dichroic atomic vapor spectroscopy and transfer cavity*

Danna Shen, Liangyu Ding, Qiuxin Zhang +4 more

We develop a high-performance ultraviolet (UV) frequency stabilization technique implemented directly on UV diode lasers by combining the dichroic atomic vapor laser lock and the resonant transfer cavity lock. As an example, we demonstrate a stable locking with measured frequency standard deviations of approximately 200 kHz and 300 kHz for 399 nm and 370 nm diode lasers in 20 min. We achieve a long-term frequency drift of no more than 1 MHz for the target 370 nm laser within an hour, which is further verified with fluorescence count rates of a single trapped 171Yb+ ion. We also find strong linear correlations between lock points and environmental factors such as temperature and atmospheric pressure. Our approach provides a simple and stable solution at a relatively low cost, and features flexible control, high feedback bandwidth and minimal power consumption of the target UV laser.

arXiv:2004.03897•Chinese Physics B•Apr 23, 2020•6 citations

Laser cooling of beryllium ions using a frequency-doubled 626 nm diode laser

Frank M. J. Cozijn, Julian Biesheuvel, Angel S. Flores +6 more

We demonstrate laser cooling of trapped beryllium ions at 313 nm using a frequency-doubled extended cavity diode laser operated at 626 nm, obtained by cooling a ridge waveguide diode laser chip to -31°C. Up to 32 mW of narrowband 626 nm laser radiation is obtained. After passage through an optical isolator and beam shaping optics, 14 mW of 626 nm power remains of which 70% is coupled into an external enhancement cavity containing a nonlinear crystal for second-harmonic generation. We produce up to 35 μW of 313 nm radiation, which is subsequently used to laser cool and detect 6×10(2) beryllium ions, stored in a linear Paul trap, to a temperature of about 10 mK, as evidenced by the formation of Coulomb crystals. Our setup offers a simple and affordable alternative for Doppler cooling, optical pumping, and detection to presently used laser systems.

Optics Letters•Jun 27, 2013•30 citations

Development of an external cavity diode laser for application to spectroscopy and laser cooling and trapping of rubidium

G. N. Botha

In the presented study a diode laser was characterised and used for spec- troscopy, measuring the resonance lines of atomic rubidium. The characteristics of diode lasers and external cavity diode lasers (ECDL) for the purposes of ab- sorption spectroscopy were investigated and an experimental setup for tunable diode laser spectroscopy using an ECDL was developed. In external cavity diode lasers, the advantages of low cost, small size and e ciency of a diode laser is combined with tunability and a narrow frequency bandwidth. The ECDL was applied in experimental setups for absorption spectroscopy and saturated ab- sorption spectroscopy. Measurement of the absorption of atomic rubidium's D2 line near 780 nm is discussed. The Doppler broadened, as well as the Doppler free spectrum of the ne and hyper ne structure of the D2 line were measured and is discussed. Finer control of the ECDL's stability and frequency, using a servo circuit, were investigated and tested. An overview is given of laser cool- ing and trapping of neutral rubidium atoms, which is the main application the ECDL were developed for.

•Mar 1, 2009•0 citations

Laser cooling of trapped ytterbium ions with an ultraviolet diode laser

D. Kielpinski, Marko Cetina, Jonathan A. Cox +1 more

We demonstrate an ultraviolet diode laser system for cooling of trapped ytterbium ions. The laser power and linewidth are comparable to those of previous systems based on resonant frequency doubling, but the system is simpler, more robust, and less expensive. We use the laser system to cool small numbers of ytterbium ions confined in a linear Paul trap. From the observed spectra, we deduce final temperatures of < 270 mK.

arXiv:physics/0511241•Optics Letters•Mar 15, 2006•38 citations
We have built an external-cavity ultraviolet diode laser at 397 nm for Ca+ spectroscopy. The laser consists of a commercial ultraviolet diode laser and a holographic grating in the Littrow configuration. Stable single-mode operation with a power of 3 mW, a linewidth no larger than 2 MHz, and a mode-hop-free frequency scanning range of 15 GHz was achieved. This laser was used to cool a small number of Ca+ in a rf trap. The ions were cooled to a low temperature to form a crystallized state. The use of the laser will simplify experimental setups for diverse applications of Ca+, such as frequency standards, quantum computers and one-atom lasers.
The diode laser system for laser cooling on the 1S 0 → 3P1 intercombination line of strontium discussed in this thesis allows us to cool and trap an atomic strontium sample to 15 muK. Samples in this temperature range are useful for the development of the next generation of atomic frequency standards, cold collision studies, and as a step towards quantum degeneracy. This laser system consists of a Littrow configuration external-cavity diode laser, which is frequency locked to a high finesse cavity. The cavity is subsequently locked to an absorption feature to produce a few mW of tunable, stabilized, single mode power at the target wavelength. We present the design and characterization of this system, including a linewidth measurement of 70 kHz, as well as preliminary results from cooling and trapping.
We have fabricated an rf ion trap and laser-cooling light sources to observe shelving transition in a single calcium ion. All the radiation required for laser cooling and observation of the transition can be prepared with diode lasers in this system. Continuous-wave radiation at 397 nm for laser cooling was generated by frequency doubling of a GaAlAs laser in an external enhancement cavity. As a preliminary experiment for observing the shelving transition, laser cooling of one hundred calcium ions was demonstrated using this radiation and another diode laser.
We develop a high-performance ultraviolet (UV) frequency stabilization technique implemented directly on UV diode lasers by combining the dichroic atomic vapor laser lock and the resonant transfer cavity lock. As an example, we demonstrate a stable locking with measured frequency standard deviations of approximately 200 kHz and 300 kHz for 399 nm and 370 nm diode lasers in 20 min. We achieve a long-term frequency drift of no more than 1 MHz for the target 370 nm laser within an hour, which is further verified with fluorescence count rates of a single trapped 171Yb+ ion. We also find strong linear correlations between lock points and environmental factors such as temperature and atmospheric pressure. Our approach provides a simple and stable solution at a relatively low cost, and features flexible control, high feedback bandwidth and minimal power consumption of the target UV laser.
We demonstrate laser cooling of trapped beryllium ions at 313 nm using a frequency-doubled extended cavity diode laser operated at 626 nm, obtained by cooling a ridge waveguide diode laser chip to -31°C. Up to 32 mW of narrowband 626 nm laser radiation is obtained. After passage through an optical isolator and beam shaping optics, 14 mW of 626 nm power remains of which 70% is coupled into an external enhancement cavity containing a nonlinear crystal for second-harmonic generation. We produce up to 35 μW of 313 nm radiation, which is subsequently used to laser cool and detect 6×10(2) beryllium ions, stored in a linear Paul trap, to a temperature of about 10 mK, as evidenced by the formation of Coulomb crystals. Our setup offers a simple and affordable alternative for Doppler cooling, optical pumping, and detection to presently used laser systems.
In the presented study a diode laser was characterised and used for spec- troscopy, measuring the resonance lines of atomic rubidium. The characteristics of diode lasers and external cavity diode lasers (ECDL) for the purposes of ab- sorption spectroscopy were investigated and an experimental setup for tunable diode laser spectroscopy using an ECDL was developed. In external cavity diode lasers, the advantages of low cost, small size and e ciency of a diode laser is combined with tunability and a narrow frequency bandwidth. The ECDL was applied in experimental setups for absorption spectroscopy and saturated ab- sorption spectroscopy. Measurement of the absorption of atomic rubidium's D2 line near 780 nm is discussed. The Doppler broadened, as well as the Doppler free spectrum of the ne and hyper ne structure of the D2 line were measured and is discussed. Finer control of the ECDL's stability and frequency, using a servo circuit, were investigated and tested. An overview is given of laser cool- ing and trapping of neutral rubidium atoms, which is the main application the ECDL were developed for.