We report an experimental study of atomic motion in the Bloch band of a periodic potential. Our system consists of cold sodium atoms in a far detuned standing wave of near resonant light. We prepare the atoms in the lowest motional band, and then impose phase modulation in order to drive interband transitions. We observe Rabi oscillations between the first and second band as a function of modulation intensity and frequency. We also observe damped oscillations of the population as a function of modulation frequency, which are primarily due to a spread in Rabi frequencies over the Bloch band.
Spin-photon interfaces are essential for communications between distant spin qubits in quantum technologies, but the interband optical excitation can also damp electrically driven hole-spin Rabi oscillations in semiconductor self-assembled quantum dots (SAQDs). We report a device-level modeling workflow that integrates realistic SAQD geometry and multiband electronic-structure analysis with models of electrically driven spin control, interband optical transitions, and open-system dynamics. This workflow enables device-level estimation of Rabi-oscillation damping arising from repeated interband absorption-emission cycles. As an example, for a gated GaAs SAQD subjected to a uniform magnetic field
B0 along the growth direction of the SAQD, we predict the Rabi frequency of the hole spin qubit and its damping under external illumination. At
B0=2 T, the calculations yield a hole-spin Rabi frequency of 37.3 MHz. When the electrically driven SAQD is illuminated by a broadband LED centered at a wavelength of 790 nm, increasing the optical power from 0.3 to 1.5 mW shortens the Rabi-oscillation decay time from 90.3 to 17.5 ns. Increasing the SAQD height reduces the electron-hole overlap and thus the emission rate, but the resulting redshift moves the interband transitions into stronger spectral overlap with the LED spectrum, thereby increasing the rate of repeated absorption-emission cycles and enhancing photon-induced Rabi-oscillation damping. The results show that geometry, spin-control conditions, and illumination spectrum should be co-optimized in semiconductor spin-photon devices.