Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Symposium on Wireless Communication Systems

On the physical layer security of backscatter RFID systems

Walid Saad, Zhu Han, H. Vincent Poor

Published Aug 1, 2012• 9 citations
Publisher

Abstract

Securing radio frequency identification (RFID) systems against malicious attacks such as eavesdropping is a highly challenging task due to the resource constrained nature of such systems. In fact, the modest computational and storage capabilities of RFID tags makes it impossible to adopt classical cryptographic techniques. While existing work has mostly focused on lightweight cryptographic techniques, in this paper, the first analysis on the adoption of physical layer security techniques in an RFID system is presented. First, the secrecy rate of ultra high frequency (UHF) RFID backscatter systems is characterized. Then, a novel approach is proposed for maximizing this secrecy rate by exploiting the nature and features of the RFID backscatter channel. To explore these features, the proposed approach allows the RFID readers to append artificial noise signals to their continuous wave (CW) signals which then propagate via the backscatter channel hence inducing interference at the eavesdroppers. For enabling the readers to optimally allocate power between their CW signals and artificial noise, a noncooperative game is formulated using which the readers can decide on their optimal power allocations so as to maximize their overall secrecy rates, given the ensuing inter-reader interference. For solving this game, a best response algorithm is proposed using which the readers can reach a Nash equilibrium. Simulation results show that the proposed approach yields significant performance gains, in terms of the average secrecy rate per RFID reader, of at least 17% relative to the classical RFID operation.

DOI
10.1109/iswcs.2012.6328537

Related papers

Safeguarding RFID Wireless Communication Against Proactive Eavesdropping

Zhao Bing-qing, Hui‐Ming Wang, Peng Liu

Passive radio-frequency identification (RFID) communication raises new transmission secrecy protection challenges, since passive tags stored information lack effective information protection mechanisms. Due to constraints of passive tags, such as limited computation and storage capabilities, security solutions based on the physical-layer security (PLS) are promising candidates compared to those based on conventional lightweight cryptography. Unlike existing endeavors on PLS of RFID wireless communication, we consider an RFID system in the presence of a special proactive eavesdropper, which is able to both enhance the information wiretap and interfere with the information detection at the RFID reader simultaneously by broadcasting its own continuous-wave (CW) signal. To defend against proactive eavesdropping attacks, we propose a wiretap-channel-conscious artificial-noise (AN)-aided secure transmission scheme for the RFID reader, which first estimates both legitimate and wiretap channels and then superimposes an AN signal on the CW signal to confuse the proactive eavesdropper. The transmit power and power allocation between the AN signal and the CW signal are optimized to maximize the secrecy rate. Furthermore, we model the attack and defense process between the proactive eavesdropper and the RFID reader as a hierarchical security game and prove it can achieve the equilibrium. The simulation results show the superiority of our proposed scheme in terms of the secrecy rate and the interactions between the RFID reader and the proactive eavesdropper.

IEEE Internet of Things Journal•Jun 1, 2020•29 citations

On the Physical Layer Security of Backscatter Wireless Systems

Walid Saad, Xiangyun Zhou, Zhu Han +1 more

Backscatter wireless communication lies at the heart of many practical low-cost, low-power, distributed passive sensing systems. The inherent cost restrictions coupled with the modest computational and storage capabilities of passive sensors, such as RFID tags, render the adoption of classical security techniques challenging; which motivates the introduction of physical layer security approaches. Despite their promising potential, little has been done to study the prospective benefits of such physical layer techniques in backscatter systems. In this paper, the physical layer security of wireless backscatter systems is studied and analyzed. First, the secrecy rate of a basic single-reader, single-tag model is studied. Then, the unique features of the backscatter channel are exploited to maximize this secrecy rate. In particular, the proposed approach allows a backscatter system's reader to inject a noise-like signal, added to the conventional continuous wave signal, in order to interfere with an eavesdropper's reception of the tag's information signal. The benefits of this approach are studied for a variety of scenarios while assessing the impact of key factors, such as antenna gains and location of the eavesdropper, on the overall secrecy of the backscatter transmission. Numerical results corroborate our analytical insights and show that, if properly deployed, the injection of artificial noise yields significant performance gains in terms of improving the secrecy of backscatter wireless transmission.

IEEE Transactions on Wireless Communications•Jun 1, 2014•125 citations

Safeguarding Backscatter RFID Communication against Proactive Eavesdropping

Zhao Bing-qing, Hui‐Ming Wang, Jia‐Cheng Jiang

Passive radio frequency identification (RFID) systems raise new transmission secrecy protection challenges against the special proactive eavesdropper, since it is able to both enhance the information wiretap and interfere with the information detection at the RFID reader simultaneously by broadcasting its own continuous wave (CW) signal. To defend against proactive eavesdropping attacks, we propose an artificial noise (AN) aided secure transmission scheme for the RFID reader, which superimposes an AN signal on the CW signal to confuse the proactive eavesdropper. The power allocation between the AN signal and the CW signal are optimized to maximize the secrecy rate. Furthermore, we model the attack and defense process between the proactive eavesdropper and the RFID reader as a hierarchical security game, and prove it can achieve the equilibrium. Simulation results show the superiority of our proposed scheme in terms of the secrecy rate and the interactions between the RFID reader and the proactive eavesdropper.

International Conference on Communications•Jun 1, 2020•2 citations

An Effective Method of Improving Security Performance of RFID System Physical Layer

SONG Huiying,GAO Yuanyuan,SHA Nan

The information in the traditional Radio Frequency Identification(RFID) system during the communication process may be intercepted by malicious users,resulting in the leakage of confidential information.Therefore,a method of improving the security performance of the physical layer of RFID system is proposed.Using security capacity as an evaluation index,two different scenarios are analyzed:When eavesdropper information is known,the security of the communication is ensured through relay selection,which maximizes the security capacity,when the eavesdropper information cannot be known,manual interference is used to reduce the eavesdropper’s ability geting the best power distribution scheme.Simulation results show that this method can greatly improve the system security capacity with minimal interference power.

•May 1, 2018•0 citations

Physical Layer Secuirty Techniques for RFID Systems

Gehad Essam Desouky

The deployment of RFID technology in various applications is delayed due to the increased concerns over possible security breaches, especially in healthcare applications. For medical devices and applications, RFID and IoT technologies can improve the wellbeing of patients and reduce errors at hospitals, but the deployment of RFID is obstructed by multiple barriers including the security concerns. Previous research and studies have proved that traditional cryptography methods cannot be applied on RFID, due to the limited computational, storage and power resources in RFID tags and readers. These constraints emerged the novel idea of exploiting the characteristics of the physical layer to achieve information secrecy in RFID systems. In this thesis, two novel key-less physical layer based secrecy approaches have been developed and analyzed. In first approach a combined beamsteering and injected noise scheme is proposed, where beamsteering is exploited at the tag and the noise injection is exploited at the reader. The results show that this novel approach outperforms previous developed security scheme for RFID. Another novel approach is developed by implementing directional modulation (DM) techniques at the RFID reader while maintaining the simplicity of the tag’s circuity and processing capabilities.

•Jun 1, 2020•0 citations

A Physical Layer Security Enhancement Scheme under the Ambient Backscatter System

Pengfei Hou, Jianping Gong, Jumin Zhao

In this paper, we proposed a scheme that Injects artificial noise from the tag end (IANT) to enhance the physical layer security of the ambient backscatter communication (ABC) system. The difference between the ABC system and the traditional radio frequency identification system is whether it uses the radio frequency (RF) signals in the environment to supply energy and modulation information for passive tags. In the IANT scheme, we select the best tag to communicate with the reader according to the channel quality between tags and reader, and at the same time select another tag to generate artificial noise that affects the receiving effect of the eavesdropper. This paper uses the method of generating noise copies in the reader to reduce the interference of artificial noise on the signal received by the reader. The simulation results show that with the increase in channel quality between tags and reader and the increase in the number of tags, the proposed IANT scheme is significantly superior to the contrast scheme in terms of system achievable secrecy rate, effectively enhancing the physical layer security of the ABC system.

Symmetry•Dec 22, 2020•7 citations
Securing radio frequency identification (RFID) systems against malicious attacks such as eavesdropping is a highly challenging task due to the resource constrained nature of such systems. In fact, the modest computational and storage capabilities of RFID tags makes it impossible to adopt classical cryptographic techniques. While existing work has mostly focused on lightweight cryptographic techniques, in this paper, the first analysis on the adoption of physical layer security techniques in an RFID system is presented. First, the secrecy rate of ultra high frequency (UHF) RFID backscatter systems is characterized. Then, a novel approach is proposed for maximizing this secrecy rate by exploiting the nature and features of the RFID backscatter channel. To explore these features, the proposed approach allows the RFID readers to append artificial noise signals to their continuous wave (CW) signals which then propagate via the backscatter channel hence inducing interference at the eavesdroppers. For enabling the readers to optimally allocate power between their CW signals and artificial noise, a noncooperative game is formulated using which the readers can decide on their optimal power allocations so as to maximize their overall secrecy rates, given the ensuing inter-reader interference. For solving this game, a best response algorithm is proposed using which the readers can reach a Nash equilibrium. Simulation results show that the proposed approach yields significant performance gains, in terms of the average secrecy rate per RFID reader, of at least 17% relative to the classical RFID operation.
Passive radio-frequency identification (RFID) communication raises new transmission secrecy protection challenges, since passive tags stored information lack effective information protection mechanisms. Due to constraints of passive tags, such as limited computation and storage capabilities, security solutions based on the physical-layer security (PLS) are promising candidates compared to those based on conventional lightweight cryptography. Unlike existing endeavors on PLS of RFID wireless communication, we consider an RFID system in the presence of a special proactive eavesdropper, which is able to both enhance the information wiretap and interfere with the information detection at the RFID reader simultaneously by broadcasting its own continuous-wave (CW) signal. To defend against proactive eavesdropping attacks, we propose a wiretap-channel-conscious artificial-noise (AN)-aided secure transmission scheme for the RFID reader, which first estimates both legitimate and wiretap channels and then superimposes an AN signal on the CW signal to confuse the proactive eavesdropper. The transmit power and power allocation between the AN signal and the CW signal are optimized to maximize the secrecy rate. Furthermore, we model the attack and defense process between the proactive eavesdropper and the RFID reader as a hierarchical security game and prove it can achieve the equilibrium. The simulation results show the superiority of our proposed scheme in terms of the secrecy rate and the interactions between the RFID reader and the proactive eavesdropper.
Backscatter wireless communication lies at the heart of many practical low-cost, low-power, distributed passive sensing systems. The inherent cost restrictions coupled with the modest computational and storage capabilities of passive sensors, such as RFID tags, render the adoption of classical security techniques challenging; which motivates the introduction of physical layer security approaches. Despite their promising potential, little has been done to study the prospective benefits of such physical layer techniques in backscatter systems. In this paper, the physical layer security of wireless backscatter systems is studied and analyzed. First, the secrecy rate of a basic single-reader, single-tag model is studied. Then, the unique features of the backscatter channel are exploited to maximize this secrecy rate. In particular, the proposed approach allows a backscatter system's reader to inject a noise-like signal, added to the conventional continuous wave signal, in order to interfere with an eavesdropper's reception of the tag's information signal. The benefits of this approach are studied for a variety of scenarios while assessing the impact of key factors, such as antenna gains and location of the eavesdropper, on the overall secrecy of the backscatter transmission. Numerical results corroborate our analytical insights and show that, if properly deployed, the injection of artificial noise yields significant performance gains in terms of improving the secrecy of backscatter wireless transmission.
Passive radio frequency identification (RFID) systems raise new transmission secrecy protection challenges against the special proactive eavesdropper, since it is able to both enhance the information wiretap and interfere with the information detection at the RFID reader simultaneously by broadcasting its own continuous wave (CW) signal. To defend against proactive eavesdropping attacks, we propose an artificial noise (AN) aided secure transmission scheme for the RFID reader, which superimposes an AN signal on the CW signal to confuse the proactive eavesdropper. The power allocation between the AN signal and the CW signal are optimized to maximize the secrecy rate. Furthermore, we model the attack and defense process between the proactive eavesdropper and the RFID reader as a hierarchical security game, and prove it can achieve the equilibrium. Simulation results show the superiority of our proposed scheme in terms of the secrecy rate and the interactions between the RFID reader and the proactive eavesdropper.
The information in the traditional Radio Frequency Identification(RFID) system during the communication process may be intercepted by malicious users,resulting in the leakage of confidential information.Therefore,a method of improving the security performance of the physical layer of RFID system is proposed.Using security capacity as an evaluation index,two different scenarios are analyzed:When eavesdropper information is known,the security of the communication is ensured through relay selection,which maximizes the security capacity,when the eavesdropper information cannot be known,manual interference is used to reduce the eavesdropper’s ability geting the best power distribution scheme.Simulation results show that this method can greatly improve the system security capacity with minimal interference power.
The deployment of RFID technology in various applications is delayed due to the increased concerns over possible security breaches, especially in healthcare applications. For medical devices and applications, RFID and IoT technologies can improve the wellbeing of patients and reduce errors at hospitals, but the deployment of RFID is obstructed by multiple barriers including the security concerns. Previous research and studies have proved that traditional cryptography methods cannot be applied on RFID, due to the limited computational, storage and power resources in RFID tags and readers. These constraints emerged the novel idea of exploiting the characteristics of the physical layer to achieve information secrecy in RFID systems. In this thesis, two novel key-less physical layer based secrecy approaches have been developed and analyzed. In first approach a combined beamsteering and injected noise scheme is proposed, where beamsteering is exploited at the tag and the noise injection is exploited at the reader. The results show that this novel approach outperforms previous developed security scheme for RFID. Another novel approach is developed by implementing directional modulation (DM) techniques at the RFID reader while maintaining the simplicity of the tag’s circuity and processing capabilities.
In this paper, we proposed a scheme that Injects artificial noise from the tag end (IANT) to enhance the physical layer security of the ambient backscatter communication (ABC) system. The difference between the ABC system and the traditional radio frequency identification system is whether it uses the radio frequency (RF) signals in the environment to supply energy and modulation information for passive tags. In the IANT scheme, we select the best tag to communicate with the reader according to the channel quality between tags and reader, and at the same time select another tag to generate artificial noise that affects the receiving effect of the eavesdropper. This paper uses the method of generating noise copies in the reader to reduce the interference of artificial noise on the signal received by the reader. The simulation results show that with the increase in channel quality between tags and reader and the increase in the number of tags, the proposed IANT scheme is significantly superior to the contrast scheme in terms of system achievable secrecy rate, effectively enhancing the physical layer security of the ABC system.