Persistent spectral hole burning (PSHB) in the ${}^{7}{F}_{0}{\ensuremath{-}}^{5}{D}_{0}$ transition and the electron excitation in the ${}^{7}{F}_{0}\ensuremath{-}4f5d$ transition of
Sm2+ doped in ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}{\ensuremath{-}\mathrm{S}\mathrm{i}\mathrm{O}}_{2}$ glasses were studied from the measurements of hole burning efficiency and the refilling of the burnt hole. The PSHB at low temperature is attributed to the optically activated rearrangement of OH bonds surrounding
Sm2+ ions. On the other hand, the PSHB at high temperature is attributed to one-step electron tunneling in the excitation state. The barrier heights for hole filling corresponding to the two mechanisms were determined to be \ensuremath{\sim}0.27 and \ensuremath{\sim}0.90 eV, respectively. Thermal depth of the trap that captures electrons by two-step ionization via the
4f5d state was determined to be \ensuremath{\sim}0.35 eV below the conduction band. A model was proposed for describing the PSHB and electron excitation of
Sm2+ doped in ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}{\ensuremath{-}\mathrm{S}\mathrm{i}\mathrm{O}}_{2}$ glasses. In addition, the dependence of hole burning efficiency on the
Al2O3 concentration, temperature, and burning wavelength was also studied.
We measured the temperature dependence of the fluorescence of Sm 2+ ions doped into a Mg 0.5 Sr 0.5 FCl 0.5 Br 0.5 mixed crystal and observed the persistent spectral hole burning at 90 K and 300 K. The electrons appearing at the 5 D 0 → 7 F 0 transition mostly come via the 4f5d→ 5 D 1 → 5 D 0 → 7 F 0 route but some of the electrons come directly from the 4f5d band. At 90 K, persistent spectral hole burning was achieved much more efficiently by the photon-gated spectral hole-burning process than by the one-photon hole-burning process, while the one-photon hole-burning process is much more efficient at 300 K.