Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Trapping Atoms with a Persistent Supercurrent Atom Chip

Christoph Hufnagel, T. Mukai, Fujio Shimizu

Published Jun 1, 2007• 0 citations
Publisher

Abstract

In this presentation we report an achievement of a persistent supercurrent atom chip and trapping87Rb atoms in the vicinity of a cold surface. Persistent supercurrent, up to 2.5 A without Joule heating, was switched on and off by using an on-chip thermal switch that was operated with a laser and a magnetic field. An intensity of the induced supercurrent was controlled by the magnitude of the initially applied z-bias field. We present our experimental results on the characteristics of our atom trap including stability, decoherence time, and influence of the chip surface.

DOI
10.1109/cleoe-iqec.2007.4386720

Related papers

Switching Persistent Supercurrent on an Atom Chip

Christoph Hufnagel, T. Mukai, Fujio Shimizu

Rubidium 87 atoms are trapped in an Ioffe-Pritchard potential generated with a persistent supercurrent that flows in a loop circuit patterned on a sapphire surface. To control the supercurrent on a surface, an on-chip thermal switch operated by a focused argon-ion laser is developed.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Aug 1, 2007•0 citations

Persistent Supercurrent Atom Chip

T. Mukai, Christoph Hufnagel, A. Kasper +4 more

Rubidium-87 atoms are trapped in an Ioffe-Pritchard potential generated with a persistent supercurrent that flows in a loop circuit patterned on a sapphire surface. The superconducting circuit is a closed loop made of a 100 microm wide molecular-beam epitaxy-grown MgB2 stripe carrying a supercurrent of 2.5 A. To control the supercurrent in the stripe, an on-chip thermal switch operated by a focused argon-ion laser is developed. The switch operates as an on/off switch of the supercurrent or as a device to set the current to a specific value with the aid of an external magnetic field. The current can be set even without an external source if the change is in the decreasing direction.

arXiv:cond-mat/0702142•Physical Review Letters•Jun 29, 2007•86 citations

A Bose-Einstein Condensate Achieved on a Persistent-supercurrent Atom Chip

T. Mukai, Hiromitsu Imai

A persistent-supercurrent atom chip is a quantum device designed with a view to transcending the limits of conventional technologies by employing some of the significant properties of quantum mechanics.We have applied this novel technique to achieve an atomic gas in a macroscopic quantum state in the vicinity of a solid-state surface.In this article, we review a technique for making an extremely stable Bose-Einstein condensate above a chip surface and describe our attempts to overcome several unpredicted problems introduced by superconductivity.

NTT technical review•Sep 1, 2014•1 citation

Bose-Einstein condensation and surface effects on atom chips

Chris J. Vale

Ultra-cold neutral atoms and Bose-Einstein condensates (BECs) offer fascinating possibilities for quantum information processing. Long decoherence times, easy qubit addressing and the potential for scalability are some advantages. Storing and manipulating atoms in magnetic microtraps or 'Atom Chips' provides a promising base on which quantum logic operations could be performed. A primary source of decoherence in atom chip experiments arises from the interaction of the micro-Kelvin atoms with the room temperature chip surface. We have experimentally investigated these interactions and observe two interesting effects. Firstly, ultra-cold clouds are seen to fragment into clumps when brought within 100 microns of the chip surface. Secondly, the lifetime of atom clouds is seen to drop off near the surface due to spin flip transitions. These are caused by radio-frequency thermal fluctuations of the magnetic field as predicted but not previously observed.

•Jan 1, 2003•0 citations

Optically tailored magnetic potentials for ultracold atoms based on superconducting vortices

Baw Swe. Phyo

Atom chips are micro-fabricated devices which create versatile magnetic potentials for trapping, cooling and controlling ensembles of ultra-cold atoms. Advancing from the typical atom chips, currents from superconducting vortices are used to trap and manipulate the ultra-cold atoms in our experiments. The superconducting vortex traps can be configured by controlling strength and pulse time of external magnetic fields together with bias fields. In order to fully utilize reconfigurability, superconducting vortices are optically manipulated with laser light to generate desired vortex patterns with this tailored trapping potentials for ultra-cold atoms are created. We have carried out heat diffusion simulations of laser patterns and characterized laser power and pulse time to effectively configure the desired vortex potentials. We have also successfully manipulated vortex matter optically to create arbitrary vortex patterns and ring potentials for cold atoms to utilize in quantum simulations and on-chip matter wave interferometry applications. Moreover, cold atoms could be used as a sensitive probe to examine magnetic field distribution of the superconducting vortices and we have used this technique to experimentally verify the resulting magnetic potentials of superconducting vortices after optical manipulation. v First of all, I would like to express my heartfelt gratitude and appreciation to my teacher and mentor, Prof.

•Jan 1, 2019•0 citations

Compact experimental apparatus for producing high-repetition-rate 87Rb Bose-Einstein condensation on an atom chip

Hoon Yu, Seung Jin Kim, Ye Lin Moon +2 more

We construct a compact experimental apparatus for producing high-repetition-rate ultra cold 87Rb atom based on an external atom chip. Initially, we produce an atomic flux from a 2D+ MOT (magneto-optical trap) in a nearly isolated 2D+ MOT chamber and improve the flux by adjusting the cooling beam detuning of the 2D+ MOT. The flux is trapped in the 3D MOT for 1.2 s and is further cooled by performing compressing the MOT for 20 ms and using polarization gradient cooling for 6.2 ms. After optical pumping into the 5S F = 2 (m F = 2) ground state, we transport atoms toward the chip surface by performing external Z coil trapping. At 1 mm below the chip surface, the external Z coil trap is completely switched to an atom chip trap by using a Z wire and a dimple wire on the chip with external bias fields. The transport and the switching take totally 520 ms. The number of atoms trapped on the atom chip is measured to be about 2 × 107. After the atoms has been compressed for 100 ms to increase trap frequencies, we perform RF evaporative cooling in the RF frequency range from 32 MHz to 6.82 MHz for 2.4 seconds. The final number of atoms in the atomic cloud after RF cooling is 1.2 × 105 atoms, and we are able to observe some Bose-Einstein condensation. The repetition rate for producing the condensation is 0.234 Hz. In this paper, we describe our experimental apparatus and processes.

Journal of the Korean Physical Society•Aug 1, 2013•5 citations
In this presentation we report an achievement of a persistent supercurrent atom chip and trapping87Rb atoms in the vicinity of a cold surface. Persistent supercurrent, up to 2.5 A without Joule heating, was switched on and off by using an on-chip thermal switch that was operated with a laser and a magnetic field. An intensity of the induced supercurrent was controlled by the magnitude of the initially applied z-bias field. We present our experimental results on the characteristics of our atom trap including stability, decoherence time, and influence of the chip surface.
Rubidium-87 atoms are trapped in an Ioffe-Pritchard potential generated with a persistent supercurrent that flows in a loop circuit patterned on a sapphire surface. The superconducting circuit is a closed loop made of a 100 microm wide molecular-beam epitaxy-grown MgB2 stripe carrying a supercurrent of 2.5 A. To control the supercurrent in the stripe, an on-chip thermal switch operated by a focused argon-ion laser is developed. The switch operates as an on/off switch of the supercurrent or as a device to set the current to a specific value with the aid of an external magnetic field. The current can be set even without an external source if the change is in the decreasing direction.
A persistent-supercurrent atom chip is a quantum device designed with a view to transcending the limits of conventional technologies by employing some of the significant properties of quantum mechanics.We have applied this novel technique to achieve an atomic gas in a macroscopic quantum state in the vicinity of a solid-state surface.In this article, we review a technique for making an extremely stable Bose-Einstein condensate above a chip surface and describe our attempts to overcome several unpredicted problems introduced by superconductivity.
Ultra-cold neutral atoms and Bose-Einstein condensates (BECs) offer fascinating possibilities for quantum information processing. Long decoherence times, easy qubit addressing and the potential for scalability are some advantages. Storing and manipulating atoms in magnetic microtraps or 'Atom Chips' provides a promising base on which quantum logic operations could be performed. A primary source of decoherence in atom chip experiments arises from the interaction of the micro-Kelvin atoms with the room temperature chip surface. We have experimentally investigated these interactions and observe two interesting effects. Firstly, ultra-cold clouds are seen to fragment into clumps when brought within 100 microns of the chip surface. Secondly, the lifetime of atom clouds is seen to drop off near the surface due to spin flip transitions. These are caused by radio-frequency thermal fluctuations of the magnetic field as predicted but not previously observed.
Atom chips are micro-fabricated devices which create versatile magnetic potentials for trapping, cooling and controlling ensembles of ultra-cold atoms. Advancing from the typical atom chips, currents from superconducting vortices are used to trap and manipulate the ultra-cold atoms in our experiments. The superconducting vortex traps can be configured by controlling strength and pulse time of external magnetic fields together with bias fields. In order to fully utilize reconfigurability, superconducting vortices are optically manipulated with laser light to generate desired vortex patterns with this tailored trapping potentials for ultra-cold atoms are created. We have carried out heat diffusion simulations of laser patterns and characterized laser power and pulse time to effectively configure the desired vortex potentials. We have also successfully manipulated vortex matter optically to create arbitrary vortex patterns and ring potentials for cold atoms to utilize in quantum simulations and on-chip matter wave interferometry applications. Moreover, cold atoms could be used as a sensitive probe to examine magnetic field distribution of the superconducting vortices and we have used this technique to experimentally verify the resulting magnetic potentials of superconducting vortices after optical manipulation. v First of all, I would like to express my heartfelt gratitude and appreciation to my teacher and mentor, Prof.
We construct a compact experimental apparatus for producing high-repetition-rate ultra cold 87Rb atom based on an external atom chip. Initially, we produce an atomic flux from a 2D+ MOT (magneto-optical trap) in a nearly isolated 2D+ MOT chamber and improve the flux by adjusting the cooling beam detuning of the 2D+ MOT. The flux is trapped in the 3D MOT for 1.2 s and is further cooled by performing compressing the MOT for 20 ms and using polarization gradient cooling for 6.2 ms. After optical pumping into the 5S F = 2 (m F = 2) ground state, we transport atoms toward the chip surface by performing external Z coil trapping. At 1 mm below the chip surface, the external Z coil trap is completely switched to an atom chip trap by using a Z wire and a dimple wire on the chip with external bias fields. The transport and the switching take totally 520 ms. The number of atoms trapped on the atom chip is measured to be about 2 × 107. After the atoms has been compressed for 100 ms to increase trap frequencies, we perform RF evaporative cooling in the RF frequency range from 32 MHz to 6.82 MHz for 2.4 seconds. The final number of atoms in the atomic cloud after RF cooling is 1.2 × 105 atoms, and we are able to observe some Bose-Einstein condensation. The repetition rate for producing the condensation is 0.234 Hz. In this paper, we describe our experimental apparatus and processes.