Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

All-optical recognition of spectrally coded optical pulses using periodically poled lithium niobate second-harmonic waveguides for ultrashort pulse optical code division multiple-access

Zheng Zheng, Andrew M. Weiner, Krishnan R. Parameswaran, Ming-Han Chou, M. M. Fejer

Published Jan 1, 2000• 1 citation
Publisher

Abstract

Summary form only given.There been increasing interest in realizing optical signal processing functions in optical communication systems based on nonlinear optical parametric processes. In the proposed ultrashort pulse optical code-division multiple access (CDMA) systems, in order to realize multiplexing and demultiplexing for multichannel operation, a nonlinear element is needed to distinguish between correctly decoded signals and incorrectly decoded multiaccess interference, which have comparable average optical power but carry different spectral information. It had been proposed to realize all-optical recognition of optical phase-coded ultrashort waveforms by using second-harmonic generation in long nonlinear crystals, which could have advantages in contrast ratio, operating power and detection efficiency over other proposed schemes. While high contrast ratios have been demonstrated based on such a scheme using bulk periodically poled lithium niobate (PPLN) crystals, the high efficiency has not yet been demonstrated. We use a simple combination of PPLN SHG waveguides and conventional photodetectors to realize all-optical recognition of spectrally phase coded optical pulses, which shows the potential of much higher conversion efficiency compared to previous bulk experiments, which is crucial for real-time operation with a high signal to noise ratio.

DOI
10.1109/cleo.2000.906901

Related papers

Novel optical thresholder based on second harmonic generation in long periodically poled lithium niobate for ultrashort pulse optical code division multiple-access

Zheng Zheng, Andrew M. Weiner

We report a novel yet practical optical thresholding scheme for ultrashort pulse CDMA using second harmonic generation in a long PPLN crystal, with a demonstrated contrast ratio of /spl sim/30 dB and the potential for low power operation.

Optical Fiber Communication Conference•Nov 7, 2002•0 citations

Spectral phase correlation of coded femtosecond pulses by second-harmonic generation in thick nonlinear crystals

Zheng Zheng, Andrew M. Weiner

We demonstrate a novel all-optical scheme for measuring the correlation of spectrally phase-coded ultrashort optical waveforms that uses second-harmonic generation (SHG) in long, periodically poled lithium niobate crystals. The SHG yield can be controlled over a range of ~30 dB, depending on the correlation of the applied phase codes. Such a spectral phase correlator has applications for ultrashort-pulse optical code-division multiple-access networking and could serve as a nonlinear optical but classical analog for certain schemes for coherent quantum control of multiphoton processes.

Optics Letters•Jul 1, 2000•59 citations

Nonlinear optical components and systems for quantum technologies and communications

Alan C. Gray

This thesis describes a series of experimental research primarily revolving around the applications of periodically poled lithium niobate (PPLN). Initially, a set of work is described regarding the fabrication and characterisation of PPLN ridge waveguides designed for frequency doubling into the blue/UV range. These waveguides are fabricated via diffusion of zinc into the crystal structure. A precision dicing process creates the sidewall definition for modal confinement and also optical facet preparation. Preliminary results with the most efficient waveguide fabricated produced a maximum conversion efficiency of 6.9%/W in a 14 mm-long device, generating 391 nm light. This was performed with a novel near-IR VECSEL; designed and built as part of a collaboration with the research undertaken in this thesis to investigate new routes for miniaturised UV sources. The development of a non-destructive route to characterise the physical dimensions of a ridge waveguide for nonlinear applications is also presented. This presented methodology uses white light interferometry and standard edge recognition algorithms to determine the waveguide width profile. In combination with numerical propagation constant data for these waveguides, a numerical phasematching spectra can be calculated. A comparison to the experimental phasematching spectra of the second-harmonic generation process enables the discrimination between issues in the fabrication processes. Using bulk PPLN, a final application is presented for communications using mid-IR radiation and all commercial components. This configuration involves the use of differencefrequency generation followed by sum-frequency generation to create the transmitter and receiver systems, respectively. This enables final detection of 809 nm light (firmly within the silicon absorption band). Bit error ratios as low as 10−7 from single-pass nonlinear conversion for both systems without the need for an additional optical amplifier in the receiver. Finally, the propagation of relative intensity noise within the system as the source lasers propagate through a two step nonlinear conversion is presented and discussed within.

•Mar 1, 2021•0 citations

Broadband quantum photon source in a step-chirped periodically poled lithium niobate waveguide

Xiao‐Xu Fang, Guoliang Shentu, he lu

Broadband nonlinear optical devices play a critical role in both classical and quantum optics. Here, we design and fabricate a 6.82-mm-long step-chirped periodically poled lithium niobate (CPPLN) waveguide on lithium niobate on insulator, which enables quasi-phase matching over a broad bandwidth for second-harmonic generation (SHG) and spontaneous parametric down-conversion (SPDC). The SHG achieves an average efficiency of 91%/W/cm 2 over the first-harmonic wavelength range of 1510 nm–1620 nm, paving the way for realizing SPDC across a wide range of pump wavelengths. For SPDC, by tuning the pump wavelength to 775 nm, 780 nm, and 785 nm, we achieve broadband photon-pair generation with a maximum full bandwidth and brightness up to 99 THz (846 nm) and 21 MHz/mW/nm, respectively. Our findings provide an efficient and experiment-friendly approach for generating broadband photon pairs, which holds significant promise for advancing applications in quantum metrology.

arXiv:2510.03619•Optics Express•Jan 13, 2026•5 citations

Second harmonic generator with an on-chip wavelength division demultiplexer

Bofu Zhao, Simin Yu, Ruixin Zhou +1 more

The second harmonic generation (SHG) technology based on quasi-phase matching in periodically poled lithium niobate (PPLN) has reached a high level of maturity. However, the generated second harmonic signal is often overwhelmed by pump light, making direct application challenging. In this paper, we have designed and fabricated, for the first time, to the best of our knowledge, an integrated second harmonic generation device with on-chip wavelength division demultiplexing (WDDM). The device achieves a second harmonic conversion efficiency of 1200% W −1 cm −2 and provides approximately 20 dB attenuation in the telecom C-band near 1550 nm, while introducing about 4 dB insertion loss in the visible light near 775 nm, significantly improving the signal-to-noise ratio. The WDDM section employs a cascaded linearly tapered waveguide design, which offers broadband coupling efficiency. This result shows promise as a foundation for fully integrated quantum photonic chips.

Applied Optics•Oct 1, 2025•0 citations

Infrared to ultraviolet quantum frequency conversion in micron-scale periodically poled titanium-diffused lithium niobate waveguides

John W. Snyder

The quantum nature of light at the single photon level allows for unique applications that classical physics neither predicts nor describes. Most notably, appropriate conditions may cause the states of photons with indistinguishable properties to become entangled, enabling novel approaches to quantum computation, secure communications, and metrology. \n \nAny operational quantum information network transporting entangled-photon states must establish a high-fidelity link between its distant nodes despite the inherent fragility of entangled states. However, the lack of a universal operating wavelength for all optical devices makes this a substantial challenge. Telecommunication fibers, entangled photon pair sources, quantum optical memories, and quantum repeaters all function in disparate spectral windows dictated by the properties of the materials used to fabricate them. Quantum frequency conversion (QFC), the single-photon limit of nonlinear parametric sum and difference frequency generation in optics, offers a bridge between spectral regions with full preservation of quantum state character, including entanglement. \n \nPeriodically poled optical waveguides in ferroelectric crystals are versatile tools in nonlinear optics. Confining the nonlinear interaction to a waveguide greatly enhances its efficiency compared to bulk optics. Periodic poling, the process of periodically inverting the domains of a ferroelectric medium using a strong electric field, enables a variety of quasi-phase matching configurations to engineer a desired nonlinear interaction. \n \nThis work concentrates on the design, development, fabrication, and characterization of a titanium-diffused periodically poled lithium niobate (Ti:PPLN) waveguide device. This device is designed to execute single-step quantum frequency conversion from 369.5nm to 1550nm in order to facilitate a quantum state transfer between standard fiber telecommunication wavelengths and an atomic quantum memory system employing trapped ytterbium ions. \n \nThe creation of phase matching conditions for such an extreme distance in frequency demands precise control of high magnitude electric fields on the single-micron scale. As the first demonstration of its kind in Ti:PPLN, the development of these devices included novel improvements to existing fabrication methods, improving the state-of-the-art of precision, quality, and yield for poling of ferroelectric crystals.

•Jan 1, 2020•0 citations
Summary form only given.There been increasing interest in realizing optical signal processing functions in optical communication systems based on nonlinear optical parametric processes. In the proposed ultrashort pulse optical code-division multiple access (CDMA) systems, in order to realize multiplexing and demultiplexing for multichannel operation, a nonlinear element is needed to distinguish between correctly decoded signals and incorrectly decoded multiaccess interference, which have comparable average optical power but carry different spectral information. It had been proposed to realize all-optical recognition of optical phase-coded ultrashort waveforms by using second-harmonic generation in long nonlinear crystals, which could have advantages in contrast ratio, operating power and detection efficiency over other proposed schemes. While high contrast ratios have been demonstrated based on such a scheme using bulk periodically poled lithium niobate (PPLN) crystals, the high efficiency has not yet been demonstrated. We use a simple combination of PPLN SHG waveguides and conventional photodetectors to realize all-optical recognition of spectrally phase coded optical pulses, which shows the potential of much higher conversion efficiency compared to previous bulk experiments, which is crucial for real-time operation with a high signal to noise ratio.
We demonstrate a novel all-optical scheme for measuring the correlation of spectrally phase-coded ultrashort optical waveforms that uses second-harmonic generation (SHG) in long, periodically poled lithium niobate crystals. The SHG yield can be controlled over a range of ~30 dB, depending on the correlation of the applied phase codes. Such a spectral phase correlator has applications for ultrashort-pulse optical code-division multiple-access networking and could serve as a nonlinear optical but classical analog for certain schemes for coherent quantum control of multiphoton processes.
This thesis describes a series of experimental research primarily revolving around the applications of periodically poled lithium niobate (PPLN). Initially, a set of work is described regarding the fabrication and characterisation of PPLN ridge waveguides designed for frequency doubling into the blue/UV range. These waveguides are fabricated via diffusion of zinc into the crystal structure. A precision dicing process creates the sidewall definition for modal confinement and also optical facet preparation. Preliminary results with the most efficient waveguide fabricated produced a maximum conversion efficiency of 6.9%/W in a 14 mm-long device, generating 391 nm light. This was performed with a novel near-IR VECSEL; designed and built as part of a collaboration with the research undertaken in this thesis to investigate new routes for miniaturised UV sources. The development of a non-destructive route to characterise the physical dimensions of a ridge waveguide for nonlinear applications is also presented. This presented methodology uses white light interferometry and standard edge recognition algorithms to determine the waveguide width profile. In combination with numerical propagation constant data for these waveguides, a numerical phasematching spectra can be calculated. A comparison to the experimental phasematching spectra of the second-harmonic generation process enables the discrimination between issues in the fabrication processes. Using bulk PPLN, a final application is presented for communications using mid-IR radiation and all commercial components. This configuration involves the use of differencefrequency generation followed by sum-frequency generation to create the transmitter and receiver systems, respectively. This enables final detection of 809 nm light (firmly within the silicon absorption band). Bit error ratios as low as 10−7 from single-pass nonlinear conversion for both systems without the need for an additional optical amplifier in the receiver. Finally, the propagation of relative intensity noise within the system as the source lasers propagate through a two step nonlinear conversion is presented and discussed within.
Broadband nonlinear optical devices play a critical role in both classical and quantum optics. Here, we design and fabricate a 6.82-mm-long step-chirped periodically poled lithium niobate (CPPLN) waveguide on lithium niobate on insulator, which enables quasi-phase matching over a broad bandwidth for second-harmonic generation (SHG) and spontaneous parametric down-conversion (SPDC). The SHG achieves an average efficiency of 91%/W/cm 2 over the first-harmonic wavelength range of 1510 nm–1620 nm, paving the way for realizing SPDC across a wide range of pump wavelengths. For SPDC, by tuning the pump wavelength to 775 nm, 780 nm, and 785 nm, we achieve broadband photon-pair generation with a maximum full bandwidth and brightness up to 99 THz (846 nm) and 21 MHz/mW/nm, respectively. Our findings provide an efficient and experiment-friendly approach for generating broadband photon pairs, which holds significant promise for advancing applications in quantum metrology.
The second harmonic generation (SHG) technology based on quasi-phase matching in periodically poled lithium niobate (PPLN) has reached a high level of maturity. However, the generated second harmonic signal is often overwhelmed by pump light, making direct application challenging. In this paper, we have designed and fabricated, for the first time, to the best of our knowledge, an integrated second harmonic generation device with on-chip wavelength division demultiplexing (WDDM). The device achieves a second harmonic conversion efficiency of 1200% W −1 cm −2 and provides approximately 20 dB attenuation in the telecom C-band near 1550 nm, while introducing about 4 dB insertion loss in the visible light near 775 nm, significantly improving the signal-to-noise ratio. The WDDM section employs a cascaded linearly tapered waveguide design, which offers broadband coupling efficiency. This result shows promise as a foundation for fully integrated quantum photonic chips.
The quantum nature of light at the single photon level allows for unique applications that classical physics neither predicts nor describes. Most notably, appropriate conditions may cause the states of photons with indistinguishable properties to become entangled, enabling novel approaches to quantum computation, secure communications, and metrology. \n \nAny operational quantum information network transporting entangled-photon states must establish a high-fidelity link between its distant nodes despite the inherent fragility of entangled states. However, the lack of a universal operating wavelength for all optical devices makes this a substantial challenge. Telecommunication fibers, entangled photon pair sources, quantum optical memories, and quantum repeaters all function in disparate spectral windows dictated by the properties of the materials used to fabricate them. Quantum frequency conversion (QFC), the single-photon limit of nonlinear parametric sum and difference frequency generation in optics, offers a bridge between spectral regions with full preservation of quantum state character, including entanglement. \n \nPeriodically poled optical waveguides in ferroelectric crystals are versatile tools in nonlinear optics. Confining the nonlinear interaction to a waveguide greatly enhances its efficiency compared to bulk optics. Periodic poling, the process of periodically inverting the domains of a ferroelectric medium using a strong electric field, enables a variety of quasi-phase matching configurations to engineer a desired nonlinear interaction. \n \nThis work concentrates on the design, development, fabrication, and characterization of a titanium-diffused periodically poled lithium niobate (Ti:PPLN) waveguide device. This device is designed to execute single-step quantum frequency conversion from 369.5nm to 1550nm in order to facilitate a quantum state transfer between standard fiber telecommunication wavelengths and an atomic quantum memory system employing trapped ytterbium ions. \n \nThe creation of phase matching conditions for such an extreme distance in frequency demands precise control of high magnitude electric fields on the single-micron scale. As the first demonstration of its kind in Ti:PPLN, the development of these devices included novel improvements to existing fabrication methods, improving the state-of-the-art of precision, quality, and yield for poling of ferroelectric crystals.