Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Intelligent Signal Processing,

Novel nitride - based materials for nonlinear optical signal processing applications at 1.5 μm

Sirona Valdueza‐Felip, F. B. Naranjo, Miguel González‐Herráez, H. Fernández, Javier Solis, S. Fernández, F. Guillot, Eva Monroy, J. Grandal, Miguel Angel Sanchez-Garcia

Published Oct 1, 2007• 0 citations
Publisher

Abstract

We characterize the third order nonlinear optical response of the interband transition of bulk InN and the intraband transition of GaN/AIN quantum dots, both of them in the spectral region around 1.5 mufrac14m. The results show that these materials can be very suitable for optical signal processing applications in the spectral region of wavelength-division multiplexed (WDM) transmission. Considering the temporal behavior of the nonlinear response, InN seems particularly useful in all-optical control of light speed (slow-light generation), whereas GaN/AIN quantum dots are promising for switching and wavelength conversion applications.

DOI
10.1109/wisp.2007.4447511

Related papers

Ultrafast all-optical modulation of interband-light pulses by ultrashort intersubband light pulses in semiconductor quantum wells

Anirban Neogi, H. Yoshida, Teruo Mozume +1 more

We analyze the optical modulation of an interband resonant light pulse by intersubband resonant light pulses in a three-level quantum well system. The origin of the third order self-saturation optical nonlinearity resulting in the modification of the interband light absorption is assumed to lie in the carrier density modulation induced by the interband and intersubband transitions. The optical nonlinearity can be optimized to achieve the maximum modulation by applying control light pulses shorter than the intersubband energy relaxation time but longer than the intersubband phase relaxation time. We have also experimentally investigated the material system suitable for optical communication regime and have observed that the In0.53Ga0.47As/AlAs0.56Sb0.44 quantum well lattice matched to InP yielding an intersubband transition as short as 1.4 μm is the most suitable system for the proposed modulation scheme.

Journal of Applied Physics•Mar 15, 1999•13 citations

Physical Properties of InN for Optically Controlling the Speed of Light

F. B. Naranjo, Miguel González‐Herráez, H. Fernández +2 more

We report on |χ(3)| and population grating lifetime measurements performed on thick InN samples. We study the possibility of using this semiconductor for slow light applications considering linear and non-linear absorption near band-gap wavelengths (~1500 nm). Results show the importance of considering linear absorption to estimate the induced change in group index.

•Jan 1, 2007•0 citations

Nonlinear Optical Absorption Caused By Interaction Between Interband - And Intraband-resonant Lights In Multiple Quantum Well Structure

Susumu Noda, Tetsuya Uemura, A. Sasaki

There is a great interest in nonlinear optical phenomena in multiple quantum well (MQW) structure. However, the investigation has been focused on either interband or intraband transition. If the interband and intraband transitions are utilized simultaneously, new application fields such as light-controlled optical modulation can be expected. (Fig.1) In this paper, we investigate theoretically the nonlinear optical absorption of interband-resonant light in n-doped MQW structure, which is caused by the simultaneous incidence of intraband-resonant light. Here we use the transition from bound to extended states as the intraband transition.

Digest on Nonlinear Optics: Materials, Phenomena and Devices•Jan 1, 1990•0 citations

Integrated Optical Device for Frequency Conversion Across the Full Telecom C -Band Spectrum

Paul Fisher, Matteo Villa, Francesco Lenzini +1 more

High-density communication through optical fiber is made possible by wavelength-division multiplexing (WDM), which is the simultaneous transmission of many discrete signals at different optical frequencies. Vast quantities of data may be transmitted without interference using this scheme but flexible routing of these signals requires an electronic middle step, which carries a cost in latency. We present a technique for frequency conversion across the entire WDM spectrum with a single device, which removes this latency cost. Using an optical waveguide in lithium niobate and two infrared pump beams, we show how to maximize the conversion efficiency between arbitrary frequencies by analyzing the role of dispersion in cascaded nonlinear processes. The technique is presented generally and may be applied to any suitable nonlinear material or platform and to classical or quantum optical signals.

arXiv:1907.04468•Physical Review Applied•Feb 10, 2020•6 citations

Phase response characterization of semiconductor saturable absorber for applications in nonlinear optical signal processing and phase-modulated signals regeneration

Lokanath Mishra, An Nguyen, Claudio Porzi +3 more

The phase response of a commercial saturable absorber based on semiconductor quantum wells embedded in a resonant cavity is investigated. The nonlinear absorption change is accompanied by a variation of the spectral phase characteristic. Also, a nonlinear change in the refractive index of the material, induced by the modified carrier density, produces a weak shift in the resonant wavelength of the cavity. These effects can be exploited to realize an optically-controllable phase shifter. Simulations based on a nonlinear model are also carried out in order to investigate the effect of the various cavity parameters and phase response of the device under different operating conditions. The results from this characterization and numerical analysis show that such device can have the potential for practical applications in telecom systems, including dynamic dispersion compensation, tunable nonlinear effects compensation, and nonlinear signal processing and all-optical regeneration of phase-modulated optical signals.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 10, 2011•1 citation

Light slowing and all-optical time division multiplexing of hybrid four-wave mixing signal in nitrogen-vacancy center*

Ruimin Wang, Irfan Ahmed, Faizan Raza +2 more

We report the experimental results of hybrid four-wave mixing and fluorescence signals from nitrogen-vacancy (NV) centers in diamond. The fluorescence signals are slowed owing to dark state. The observed delay time of light slowing due to interconversion between NV− and NV0 is about 6.4 μs. The relative intensities of read-out signals change with the wavelength and power of writing pulse. Based on light slowing, we present the model of all-optical time division multiplexing. The intensity ratio in different demultiplexed channels is modulated by the wavelength and power of control field. It has potential applications in quantum communication and all-optical network.

Chinese Physics B•Mar 1, 2020•3 citations
We characterize the third order nonlinear optical response of the interband transition of bulk InN and the intraband transition of GaN/AIN quantum dots, both of them in the spectral region around 1.5 mufrac14m. The results show that these materials can be very suitable for optical signal processing applications in the spectral region of wavelength-division multiplexed (WDM) transmission. Considering the temporal behavior of the nonlinear response, InN seems particularly useful in all-optical control of light speed (slow-light generation), whereas GaN/AIN quantum dots are promising for switching and wavelength conversion applications.
We analyze the optical modulation of an interband resonant light pulse by intersubband resonant light pulses in a three-level quantum well system. The origin of the third order self-saturation optical nonlinearity resulting in the modification of the interband light absorption is assumed to lie in the carrier density modulation induced by the interband and intersubband transitions. The optical nonlinearity can be optimized to achieve the maximum modulation by applying control light pulses shorter than the intersubband energy relaxation time but longer than the intersubband phase relaxation time. We have also experimentally investigated the material system suitable for optical communication regime and have observed that the In0.53Ga0.47As/AlAs0.56Sb0.44 quantum well lattice matched to InP yielding an intersubband transition as short as 1.4 μm is the most suitable system for the proposed modulation scheme.
There is a great interest in nonlinear optical phenomena in multiple quantum well (MQW) structure. However, the investigation has been focused on either interband or intraband transition. If the interband and intraband transitions are utilized simultaneously, new application fields such as light-controlled optical modulation can be expected. (Fig.1) In this paper, we investigate theoretically the nonlinear optical absorption of interband-resonant light in n-doped MQW structure, which is caused by the simultaneous incidence of intraband-resonant light. Here we use the transition from bound to extended states as the intraband transition.
High-density communication through optical fiber is made possible by wavelength-division multiplexing (WDM), which is the simultaneous transmission of many discrete signals at different optical frequencies. Vast quantities of data may be transmitted without interference using this scheme but flexible routing of these signals requires an electronic middle step, which carries a cost in latency. We present a technique for frequency conversion across the entire WDM spectrum with a single device, which removes this latency cost. Using an optical waveguide in lithium niobate and two infrared pump beams, we show how to maximize the conversion efficiency between arbitrary frequencies by analyzing the role of dispersion in cascaded nonlinear processes. The technique is presented generally and may be applied to any suitable nonlinear material or platform and to classical or quantum optical signals.
The phase response of a commercial saturable absorber based on semiconductor quantum wells embedded in a resonant cavity is investigated. The nonlinear absorption change is accompanied by a variation of the spectral phase characteristic. Also, a nonlinear change in the refractive index of the material, induced by the modified carrier density, produces a weak shift in the resonant wavelength of the cavity. These effects can be exploited to realize an optically-controllable phase shifter. Simulations based on a nonlinear model are also carried out in order to investigate the effect of the various cavity parameters and phase response of the device under different operating conditions. The results from this characterization and numerical analysis show that such device can have the potential for practical applications in telecom systems, including dynamic dispersion compensation, tunable nonlinear effects compensation, and nonlinear signal processing and all-optical regeneration of phase-modulated optical signals.
We report the experimental results of hybrid four-wave mixing and fluorescence signals from nitrogen-vacancy (NV) centers in diamond. The fluorescence signals are slowed owing to dark state. The observed delay time of light slowing due to interconversion between NV− and NV0 is about 6.4 μs. The relative intensities of read-out signals change with the wavelength and power of writing pulse. Based on light slowing, we present the model of all-optical time division multiplexing. The intensity ratio in different demultiplexed channels is modulated by the wavelength and power of control field. It has potential applications in quantum communication and all-optical network.