Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A NOVEL OPTICAL MEMORY EFFECT USING MULTIPLE LIGHT SCATTERING

Atusi Kurita, Takashi Kushida

Published May 1, 2001• 0 citations
Publisher

Abstract

A new kind of optical memory effect has been observed in Sm -doped ZnS nanocrystals and also in polystyrene powder doped with a fluorescent fulgide derivative. In this effect, not only the wavelength but also the angle of the incident laser light is memorized in the medium with high resolution even at room temperature. The reading is made in the form of a hole burnt in the fluorescence excitation spectrum. The mechanism is ascribed to the recording of the interference pattern of the multiple-scattered light through photo-bleaching and the reading through the spatial overlap integral between the modulated absorbance and the interference pattern of the exciting light. Various characteristics of this effect and its possible application to the high-density optical data storage are discussed.

DOI
10.1142/9789812811523_0008

Related papers

Wavelength- and Angle-Selective Optical Memory Effect by Interference of Multiple-Scattered Light

Atusi Kurita, Yasuo Kanematsu, Masahito Watanabe +2 more

We report observations of a new optical memory effect in Sm-doped ZnS nanocrystals and elucidate its mechanism. One of the salient properties of this effect is that the incident angle as well as the wavelength of incoming light is memorized with high resolution. We show that this effect is not based upon spectral selection of homogeneous absorption lines as in the persistent spectral hole-burning effect but upon recording of interference patterns of multiple-scattered light in disordered media.

Physical Review Letters•Aug 23, 1999•44 citations

Data storage systems using photochemical hole burning. Special kind of photochromism.

Toshiro Tani

Recent developments in the new spectroscopic technique concerning photochemical hole burning (PHB) and its possible application to the wavelength-multiplexed high density optical memory systems are reviewed. The basic concept of PHB is the site-selective optical bleaching usually observed in the solid systems doped with organic dye molecules at liquid helium temperature region. The molecular conditions and the fundamental mechanisms for the appearance of the holes are discussed in relation to the ordinary photochromic molecules. The review also includes discussions on the present research activities on PHB materials for future optical storage systems.

Hyomen Kagaku•Jan 1, 1987•0 citations

Plasmon‐Thermal Driven Smart Luminescence of Rare‐Earth Doped Nanocrystals for Information Storage (Advanced Optical Materials 24/2025)

Chengyun Zhang, Qingxin Yin, Shuangkang Ge +8 more

Nanophotonic Optical Memory In article 2500245, Qingfeng Yan and co-workers reveal unique optical memory effects in Y2O3:Eu3+ micro/nanocrystals with plasmonic nanostructures, transcending conventional thermal quenching. This phenomenon enables light intensity memorization through tunable absorption cross-sections, allowing information encoding in luminescent films for next-generation data storage applications.

Advanced Optical Materials•Aug 1, 2025•0 citations

Picosecond Time- And Space-Domain Holography By Photochemical Hole Burning

Peeter Saari, Rein K. Kaarli, Alexander Rebane

In this paper, the concept of holographic storage and reproduction of optical signals is generalized for the case of a spectrally highly selective recording medium, which in addition to fixing the spatial intensity distribution of the incident light is also able to memorize its intensity spectrum. We demonstrate persistent storage, recall and conjugation of picosecond light signals from various model objects by making use of coherent optical responses in photochemically active media. A simple linear theory of holographic storage and playback of both the spatial and the temporal behaviour of the signal is shown to well describe the experimental results obtained by utilizing octaethylporphin-doped polystyrene at 1.8 K as a spectrally selective recording material. The proposed method of time- and space-domain holographic recording provides the storage and reproduction of time-dependent optical signals with a duration of 10-8 to 10-13 sec. This presents unique possibilities for ultrahigh-speed data-storage and optical signal-processing.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 15, 1988•0 citations

One-photon persistent spectral hole burning in Sm+2-doped Mg 0.5 Sr 0.5 FCl 0.5 Br 0.5 at room temperature

Hyun‐Sook Bae, Byung Yong Yu, Jung Il Lee +5 more

A mixed crystal Sm2+-doped Mg0.5Sr0.5FCl0.5Br0.5 has a high potential in the application for a 3D optical memory. We have observed one-photon persistent spectral hole burning in this material at room temperature. The powder sample of (formula available in paper) was synthesized by firing at 1000 degrees C for 2 hours in a reducing stream of hydrogen. The product was examined with an X-ray diffractometer for the crystalline structure. Fluorescence excitation and emission spectra were recorded with a spectrofluorometer.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 13, 2000•0 citations

Ultra-High Density Optical Memory by Photochemical Hole Burning (PHB) and Multi-Layered PHB System

Motomu Yoshimura, Tetsuya Nishimura, Noriaki Tsukada

(1) Photochemical Hole Burning (PHB) has a possibility to offer us an optical memory with ultra-high data storage density of more than 1011 bits/cm2 theoretically1). Such high data density can be achieved by multiplexing the information additional wavelength dimension besides the x-y spatial domain. The multiplexing of the information is realized by burning a sequence of narrow spectral holes as signals in the spectrum of a PHB material. Then the degree of information multiplexing depends on the degree of the multiple holes in the spectrum. The most essential subject for PHB memory is how densely and how many multiple holes can be formed without any interaction between any two holes.

Optical Data Storage•Jan 1, 1989•0 citations
A new kind of optical memory effect has been observed in Sm -doped ZnS nanocrystals and also in polystyrene powder doped with a fluorescent fulgide derivative. In this effect, not only the wavelength but also the angle of the incident laser light is memorized in the medium with high resolution even at room temperature. The reading is made in the form of a hole burnt in the fluorescence excitation spectrum. The mechanism is ascribed to the recording of the interference pattern of the multiple-scattered light through photo-bleaching and the reading through the spatial overlap integral between the modulated absorbance and the interference pattern of the exciting light. Various characteristics of this effect and its possible application to the high-density optical data storage are discussed.
Recent developments in the new spectroscopic technique concerning photochemical hole burning (PHB) and its possible application to the wavelength-multiplexed high density optical memory systems are reviewed. The basic concept of PHB is the site-selective optical bleaching usually observed in the solid systems doped with organic dye molecules at liquid helium temperature region. The molecular conditions and the fundamental mechanisms for the appearance of the holes are discussed in relation to the ordinary photochromic molecules. The review also includes discussions on the present research activities on PHB materials for future optical storage systems.
In this paper, the concept of holographic storage and reproduction of optical signals is generalized for the case of a spectrally highly selective recording medium, which in addition to fixing the spatial intensity distribution of the incident light is also able to memorize its intensity spectrum. We demonstrate persistent storage, recall and conjugation of picosecond light signals from various model objects by making use of coherent optical responses in photochemically active media. A simple linear theory of holographic storage and playback of both the spatial and the temporal behaviour of the signal is shown to well describe the experimental results obtained by utilizing octaethylporphin-doped polystyrene at 1.8 K as a spectrally selective recording material. The proposed method of time- and space-domain holographic recording provides the storage and reproduction of time-dependent optical signals with a duration of 10-8 to 10-13 sec. This presents unique possibilities for ultrahigh-speed data-storage and optical signal-processing.
A mixed crystal Sm2+-doped Mg0.5Sr0.5FCl0.5Br0.5 has a high potential in the application for a 3D optical memory. We have observed one-photon persistent spectral hole burning in this material at room temperature. The powder sample of (formula available in paper) was synthesized by firing at 1000 degrees C for 2 hours in a reducing stream of hydrogen. The product was examined with an X-ray diffractometer for the crystalline structure. Fluorescence excitation and emission spectra were recorded with a spectrofluorometer.
(1) Photochemical Hole Burning (PHB) has a possibility to offer us an optical memory with ultra-high data storage density of more than 1011 bits/cm2 theoretically1). Such high data density can be achieved by multiplexing the information additional wavelength dimension besides the x-y spatial domain. The multiplexing of the information is realized by burning a sequence of narrow spectral holes as signals in the spectrum of a PHB material. Then the degree of information multiplexing depends on the degree of the multiple holes in the spectrum. The most essential subject for PHB memory is how densely and how many multiple holes can be formed without any interaction between any two holes.