A decoherence-free subspace (DFS) is an important class of quantum-error-correcting (QEC) codes that have been proposed for fault-tolerant quantum computation. The applications of QEC techniques, however, are not limited to quantum-information processing (QIP). Here we demonstrate how QEC codes may be used to improve experimental designs of quantum devices to achieve noise suppression. In particular, neutron interferometry is used as a test bed to show the potential for adding quantum error correction to quantum measurements. We built a five-blade neutron interferometer that incorporates both a standard Mach-Zender configuration and a configuration based on a DFS. Experiments verify that the DFS interferometer is protected against low-frequency mechanical vibrations. We anticipate these improvements will increase the range of applications for matter-wave interferometry.
A decoherence-free subspace (DFS) is an important class of quantum-error-correcting (QEC) codes that have been proposed for fault-tolerant quantum computation. The applications of QEC techniques, however, are not limited to quantum-information processing (QIP). Here we demonstrate how QEC codes may be used to improve experimental designs of quantum devices to achieve noise suppression. In particular, neutron interferometry is used as a test bed to show the potential for adding quantum error correction to quantum measurements. We built a five-blade neutron interferometer that incorporates both a standard Mach-Zender configuration and a configuration based on a DFS. Experiments verify that the DFS interferometer is protected against low-frequency mechanical vibrations. We anticipate these improvements will increase the range of applications for matter-wave interferometry.
Physics
Optical interferometers can probe an object at high resolution through its effect on their interference pattern. Neutrons also have an associated wavelength—the de Broglie wavelength— which is very much smaller than any optical wavelength and can in principle provide information on an atomic size scale. However, neutron interferometers are susceptible to low-frequency mechanical vibrations of the interferometer itself. Pushin et al. show that ideas based on error correction protocols used in quantum information science can be carried over to suppress such effects of environmental noise. They show that the formation of decoherence-free subspaces (DFSs), special states in which the system is manipulated in such a way as to protect it from the surrounding environment, can be formed by carefully designing the setup of the system. In this case, they use a figure-eight interferometer carved into a single ingot of silicon instead of the usual two-arm interferometer setup and show that a DFS formed at the center of the interferometer suppresses the effect of environmental noise.
Phys. Rev. Lett. 107 , 150401 (2011).
Neutron interferometry with its ability to encode and extract information provides a test \nbed for quantum mechanics and precise measurement of physical quantities of significant \nimportance in physics. However, this significant key investigative technique is weakened \nby its very fragile nature; neutron interferometry has proven to be highly sensitive to \nenvironmental noise. \n \nOnce brought to its optimal state, the use of neutron interferometry enabled with \nquantum information, represents a milestone. Indeed a realization of high-quality neutron \ninterferometry could pave a way to probe materials research such as probing properties \nwater in proteins and topological materials. Thus understanding and solving the sensitivity \nof neutron interferometers to noise is a key step toward possible applications. This is the \ncore of the work done in this Thesis. \n \nWe incorporated two theoretical techniques developed for quantum information sciences \ninto the construction of a new polarized neutron interferometry beam line: The technique \nof quantum error correction and the technique of open quantum system. One focus of this \nwork is to report on the design, the construction as well as the characteristic features of \nthis beamline. \n \nThis thesis involves experimental data, showing how the neutron beam intensity at the \nexit of a three-blade neutron interferometer can be controlled by the interferometer blades \nthickness. Secondly, is also presents an alternative and simplified quantum information \napproach to dynamical diffraction, based on repeated application of a coherent beam- \nsplitting unitary at coarse-grained lattice sites. Demanding translational invariance added \nto a computationally tractable number of sites in the coarse-graining reproduced many \nresults typical of standard dynamical diffraction theory and experiments. Building on that, \na proposal for a new five-blade neutron interferometer is presented and its robustness to \nnoise, resulting from dynamical diffraction together with low-frequency external mechanical \nvibration is discussed. \n \nSteps ahead in our work, neutron interferometry may be improved as well as adapted to \nmore applications by incorporating the spin and orbital degrees of freedom to a path-based \nivinterferometer. In this concern, we propose a method to prepare the spin-orbit state by \npassing a polarized neutron beam through a quadrupole magnetic field. Initially designed \nfor a beam the size of a coherent length, we extend this method to work for spatially \ndisplaced beams by using linear magnetic gradients.
Perfect single-crystal neutron interferometers are adversely sensitive to environmental disturbances, particularly mechanical vibrations. The sensitivity to vibrations results from the slow velocity of thermal neutrons and the long measurement time that are encountered in a typical experiment. Consequently, to achieve a good interference solutions for reducing vibration other than those normally used in optical experiments must be explored. Here we introduce a geometry for a neutron interferometer that is less sensitive to low-frequency vibrations. This design may be compared with both dynamical decoupling methods and decoherence-free subspaces that are described in quantum information processing. By removing the need for bulky vibration isolation setups, this design will make it easier to adopt neutron interferometry to a wide range of applications and increase its sensitivity.
Neutron interferometry has proved to be a very precise technique for measuring the quantum mechanical phase of a neutron caused by a potential energy difference between two spatially separated neutron paths inside interferometer. The path length inside the interferometer can be many centimeters (and many centimeters apart) making it very practical to study a variety of samples, fields, potentials, and other macroscopic medium and quantum effects. The precision of neutron interferometry comes at a cost; neutron interferometers are very susceptible to environmental noise that is typically mitigated with large, active isolated enclosures. With recent advances in quantum information processing especially quantum error correction (QEC) codes we were able to demonstrate a neutron interferometer that is insensitive to vibrational noise. A facility at NIST’s Center for Neutron Research (NCNR) has just been commissioned with higher neutron flux than the NCNR’s older interferometer setup. This new facility is based on QEC neutron interferometer, thus improving the accessibility of neutron interferometry to the greater scientific community and expanding its applications to quantum computing, gravity, and material research.
Quantum error correction (QEC) faces a significant challenge in realistic noisy intermediate-scale quantum (NISQ) devices: correlated decoherence. Building upon the foundational QEC-C protocol, we introduce QEC-C II, a scalable framework that delivers robust fault tolerance against spatially and temporally correlated noise. By integrating decoherence-free subspace (DFS) principles and correlation-aware adaptive feedback, QEC-C II achieves exponential error suppression in simulation under correlated noise models, with fewer physical qubits than typical topological baselines for the same target error in our benchmarks. The protocol leverages an enhanced scaling law, β(n) = 0.788 e 0.360n , and efficiently suppresses noise with minimal computational overhead. We validate QEC-C II on 28-qubit GHZ states, extend it to 56-qubit subspaces, and conduct 84-qubit stress-test simulations under correlated noise models. The results demonstrate sustained fidelities exceeding 99.99 % in simulations under realistic dephasing, amplitude-damping, burst-error, and correlated decoherence scenarios, with rapid convergence (typically ≤ 2 iterations in our simulations). QEC-C II significantly reduces both resource and control complexity, simplifying hardware integration and improving performance with increasing system size. This work provides a practical pathway toward resource-efficient fault tolerance in quantum processors operating in real-world correlated environments.
Quantum error-correcting codes (QECCs) and decoherence-free subspace (DFS) codes provide active and passive means, respectively, to address certain types of errors that arise during quantum computation. The latter technique is suitable to correct correlated errors with certain symmetries and the former to correct independent errors. The concatenation of a QECC and a DFS code results in a degenerate code that splits into actively and passively correcting parts, with the degeneracy impacting either part, leading to degenerate errors as well as degenerate stabilizer operators. The concatenation of the two types of code can aid universal fault-tolerant quantum computation when a mix of correlated and independent errors is encountered. In particular, we show that for sufficiently strongly correlated errors, the concatenation with the DFS as the inner code provides better entanglement fidelity, whereas for sufficiently independent errors, the concatenation with the QECC as the inner code is preferable. As illustrative examples, we examine in detail the concatenation of a two-qubit DFS code and a three-qubit repetition code or five-qubit Knill-Laflamme code, under independent and correlated errors.