Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Journal on Selected Areas in Communications

On the Jamming Power Allocation for Secure Amplify-and-Forward Relaying via Cooperative Jamming

Ki‐Hong Park, Tian Wang, Mohamed‐Slim Alouini

Published Aug 23, 2013• 149 citations
Publisher

Abstract

In this paper, we investigate secure communications in two-hop wireless relaying networks with one eavesdropper. To prevent the eavesdropper from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as cooperative jamming. This jamming noise helps protecting the source message from being captured reliably at the eavesdropper, while the destination cancels its self-intended noise. According to the channel information available at the destination, we derive three jamming power allocation strategies to minimize the outage probability of the secrecy rate. In addition, we derive analytic results quantifying the jamming power consumption of the proposed allocation methods.

DOI
10.1109/jsac.2013.130908

Related papers

Cooperative jamming power control to enhance secrecy communications of AF Relaying systems for Rayleigh fading channel

Ki‐Hong Park, Mohamed‐Slim Alouini

In this paper, we investigate secrecy communications in two-hop wireless relaying networks which consist of one source, one amplify-and-forward (AF) relay, one legitimate destination, and one eavesdropper. To prevent the eavesdropper from intercepting the source message, we make the destination send the intended noise to the AF relay during the first phase. This is referred to as cooperative jamming. According to the channel information at the destination, we address two types of jamming power allocation; (i) rate-optimal power allocation and (ii) outage-optimal power allocation. More specifically, without the instantaneous channel knowledge for the eavesdropper side, the outage probability of the secrecy rate is minimized with respect to the intended noise power level. We show that the outage-optimal allocation gives almost the same outage probability as the rateoptimal one. In addition, the jamming power consumption can be significantly reduced compared to the fixed and rate-optimal power allocation methods.

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)•Sep 1, 2012•5 citations

Power Allocation for Cooperative Jamming in Amplify-and-Forward Relaying Network with Eavesdropper

Yongyun Choi, Jae Hong Lee

In this paper, we propose an optimal source power allocation scheme for a two-hop amplify-and-forward relaying network with cooperative jamming where a source and destination transmit jamming signals. For the full CSI of all link and the CSI for desired link, the source power is optimally splitted to minimize the secrecy outage probability. Simulation results show that the proposed power allocation scheme improves the secrecy rate and reliability.

IEEE Vehicular Technology Conference•May 1, 2015•2 citations

Amplify‐and‐forward‐based cooperative jamming strategy with power allocation for secure communication

An Li, Yizhu Xu, Yuhao Wang +1 more

Summary This paper deals with the use of jamming transmission for secure amplify‐and‐forward‐based relay networks with total power constraints. An approach that the source and the relay use some of their available power to transmit jamming signals in order to create interference at the eavesdropper is investigated. Assume that the relay and destination have an a priori knowledge of the jamming signals. A power allocation policy that defines how the available power is distributed between the message signal and that of the jamming signal is presented. The results show that the proposed approach can increase the secrecy level and that a positive secrecy rate can be achieved even when the eavesdropper may be near the source. Copyright © 2014 John Wiley & Sons, Ltd.

International Journal of Communication Systems•Jan 10, 2014•12 citations

Cooperative Jamming and Power Allocation for Wireless Relay Networks in Presence of Eavesdropper

Lun Dong, Homayoun Yousefi’zadeh, Hamid Jafarkhani

Relying on physical layer security is an attractive alternative of utilizing cryptographic algorithms at upper layers of protocol stack for secure communications. In this paper, we consider a two-hop wireless relay network in the presence of an eavesdropper. Our scenario of interest spans over a four-node network model including a source, a destination, a trusted relay, and an untrusted eavesdropper in which the relay forwards the source message in a decode-and-forward (DF) fashion. The source and relay are allowed to use some of their available power to transmit jamming signals in order to create interference at the eavesdropper. The relay and destination are assumed to have the knowledge of the jamming signals. An important question is how to allocate the transmission power of the message signal and that of the jamming signal. First, we propose an optimal power allocation solution in which the knowledge of global channel state information (CSI) is required. To facilitate practical system design, two simple yet sub-optimal power allocation solutions are proposed which do not rely on eavesdropper's channels. For the purpose of performance comparisons, power allocation problems for two benchmark schemes without jamming are also analyzed.

International Conference on Communications•Jun 1, 2011•95 citations

Secrecy rate optimization for two-hop relay system with energy harvesting based on cooperative jamming

Lei Wei-ji, 谢显中, 江雪 +1 more

A two-hop relay-eavesdropper channel model with one transmitter,one relay,one receiver and one eavesdropper is considered,where the nodes harvest energy and the save-then-transmit protocol is employed.That is,the nodes harvest energy first,which is then used to transmit the data.The relay is operated as an amplify-and-forward relay,and the destination sends an intended jamming noise to protect information,which is referred as cooperative jamming.First,the condition that ensures the promotion of secrecy capacity is derived.Second,an optimization algorithm to maximize secrecy rate Rsis given,which is based on the optimization of the energy saving time ratioρand the jamming power allocation scaling factorα.Simulation results show that the algorithm has a high convergence speed,and can effectively improve secrecy rate.

Systems engineering and electronics•Jan 1, 2015•0 citations

Improving Wireless Physical Layer Security via Cooperating Relays

Lun Dong, Zhu Han, Athina P. Petropulu +1 more

Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.

IEEE Transactions on Signal Processing•Dec 11, 2009•1,355 citations
In this paper, we investigate secure communications in two-hop wireless relaying networks with one eavesdropper. To prevent the eavesdropper from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as cooperative jamming. This jamming noise helps protecting the source message from being captured reliably at the eavesdropper, while the destination cancels its self-intended noise. According to the channel information available at the destination, we derive three jamming power allocation strategies to minimize the outage probability of the secrecy rate. In addition, we derive analytic results quantifying the jamming power consumption of the proposed allocation methods.
In this paper, we investigate secrecy communications in two-hop wireless relaying networks which consist of one source, one amplify-and-forward (AF) relay, one legitimate destination, and one eavesdropper. To prevent the eavesdropper from intercepting the source message, we make the destination send the intended noise to the AF relay during the first phase. This is referred to as cooperative jamming. According to the channel information at the destination, we address two types of jamming power allocation; (i) rate-optimal power allocation and (ii) outage-optimal power allocation. More specifically, without the instantaneous channel knowledge for the eavesdropper side, the outage probability of the secrecy rate is minimized with respect to the intended noise power level. We show that the outage-optimal allocation gives almost the same outage probability as the rateoptimal one. In addition, the jamming power consumption can be significantly reduced compared to the fixed and rate-optimal power allocation methods.
Summary This paper deals with the use of jamming transmission for secure amplify‐and‐forward‐based relay networks with total power constraints. An approach that the source and the relay use some of their available power to transmit jamming signals in order to create interference at the eavesdropper is investigated. Assume that the relay and destination have an a priori knowledge of the jamming signals. A power allocation policy that defines how the available power is distributed between the message signal and that of the jamming signal is presented. The results show that the proposed approach can increase the secrecy level and that a positive secrecy rate can be achieved even when the eavesdropper may be near the source. Copyright © 2014 John Wiley & Sons, Ltd.
Relying on physical layer security is an attractive alternative of utilizing cryptographic algorithms at upper layers of protocol stack for secure communications. In this paper, we consider a two-hop wireless relay network in the presence of an eavesdropper. Our scenario of interest spans over a four-node network model including a source, a destination, a trusted relay, and an untrusted eavesdropper in which the relay forwards the source message in a decode-and-forward (DF) fashion. The source and relay are allowed to use some of their available power to transmit jamming signals in order to create interference at the eavesdropper. The relay and destination are assumed to have the knowledge of the jamming signals. An important question is how to allocate the transmission power of the message signal and that of the jamming signal. First, we propose an optimal power allocation solution in which the knowledge of global channel state information (CSI) is required. To facilitate practical system design, two simple yet sub-optimal power allocation solutions are proposed which do not rely on eavesdropper's channels. For the purpose of performance comparisons, power allocation problems for two benchmark schemes without jamming are also analyzed.
A two-hop relay-eavesdropper channel model with one transmitter,one relay,one receiver and one eavesdropper is considered,where the nodes harvest energy and the save-then-transmit protocol is employed.That is,the nodes harvest energy first,which is then used to transmit the data.The relay is operated as an amplify-and-forward relay,and the destination sends an intended jamming noise to protect information,which is referred as cooperative jamming.First,the condition that ensures the promotion of secrecy capacity is derived.Second,an optimization algorithm to maximize secrecy rate Rsis given,which is based on the optimization of the energy saving time ratioρand the jamming power allocation scaling factorα.Simulation results show that the algorithm has a high convergence speed,and can effectively improve secrecy rate.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.