Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser Spectroscopy

BOSE-EINSTEIN CONDENSATE IN A SURFACE MICRO TRAP

József Fortágh, Herwig Ott, Götz Schlotterbeck, A. GROSSMANN, Claus Zimmermann

Published Jun 1, 2002• 0 citations
Publisher

Abstract

We report on Bose-Einstein condensation in a surface micro trap. The strongly anisotropic trapping potential is generated by a microstructure which consists of micro-fabricated linear copper conductors at a width ranging from 3 to 30 μm. The ratio of the trap frequencies for the motion in longitudinal and transverse direction can be varied continuously in a wide range up to values of 100.000. After capturing of 5×10 8 87 Rb atoms from a pulsed thermal dispenser source directly into a magneto-optical trap (MOT) the magnetically stored atoms are transfered into the micro trap by adiabatic transformation of the trapping potential. In the micro trap with high collision rate the atoms are cooled by forced evaporation into the degenerate regime. The pure condensate contains of up to 4×10 5 atoms. The complete in vacuo trap design is compatible with ultrahigh vacuum conditions below 2×10 −11 mbar.

DOI
10.1142/9789812778307_0033

Related papers

Bose-Einstein Condensation in a Surface Microtrap

Herwig Ott, József Fortágh, G. Schlotterbeck +2 more

Bose-Einstein condensation has been achieved in a magnetic surface microtrap with 4 x 10(5) (87)Rb atoms. The strongly anisotropic trapping potential is generated by a microstructure which consists of microfabricated linear copper conductor of widths ranging from 3 to 30 microm. After loading a high number of atoms from a pulsed thermal source directly into a magneto-optical trap the magnetically stored atoms are transferred into the microtrap by adiabatic transformation of the trapping potential. In the microtrap the atoms are cooled to condensation using forced rf-evaporation. The complete in vacuo trap design is compatible with ultrahigh vacuum below 2 x 10(-11) mbar.

arXiv:cond-mat/0109322•Physical Review Letters•Nov 13, 2001•371 citations

Bose-Einstein Condensation in a Ioffe-Pritchard trap

U. Ernst, Andreas Marte, Florian Schreck +2 more

Since its first observation in 1995, Bose-Einstein condensation (BEC) experiments in dilute gases have been performed with only a few different kinds of magnetic traps. We have performed a BEC experiment with /sup 87/Rb atoms in a Ioffe-Pritchard magnetic potential, which opens up the possibility to study, e.g., Bose-Einstein condensates released in only one dimension. Our trap consists of a clip-like coil, which generates a pure two-dimensional (2D) quadrupole field for radial confinement. The axial confinement is provided by two plane pinch coils inside the clip-coil. These two coils create a bottle field. Two additional Helmholtz coils on the same symmetry axis are used to compensate the homogeneous part of the bottle field. By continuously varying the currents through the coils, the trapping potential can be changed from a 3D spherical harmonic to a 2D linear potential. The change can be done adiabatically or nonadiabatically by switching off the axial confinement slowly, or instantaneously respectively. This opens up the possibility to study 1D nonlinear atom optics. In combination with, e.g., far detuned light sheets, a Fabry-Perot type interferometer for a condensate might be realizable. Our experiments are performed in a vacuum system with two magneto-optical traps, which serves as the source of cold atoms for the magnetic trap. 10/sup 9/ atoms are captured in less than one minute. RF-induced evaporative cooling is used to increase the phase space density of the trapped atomic cloud. The BEC phase transition occurs at a temperature of 550 nK with 10/sup 6/ particles in the trap. Pure condensates with more than 10/sup 5/ atoms were produced.

European Quantum Electronics Conference (EQEC)•Aug 24, 2005•0 citations

Bose-Einstein condensation in a Ioffe-Pritchard trap

U. Ernst, Andreas Marte, Florian Schreck +2 more

Summary form only given.Since its first observation in 1995, Bose-Einstein condensation (BEC) experiments in dilute gases have been performed with only a few different kinds of magnetic traps. We have performed a BEC experiment with /sup 87/Rb atoms in a Ioffe-Pritchard magnetic potential, which opens up the possibility to study, e.g., Bose-Einstein condensates released in only one dimension. Our trap consists of a clip-like coil, which generates a pure two-dimensional (2D) quadrupole field for radial confinement. The axial confinement is provided by two plane pinch coils inside the clip-coil. These two coils create a bottle field. Two additional Helmholtz coils on the same symmetry axis are used to compensate the homogeneous part of the bottle field. By continuously varying the currents through the coils, the trapping potential can be changed from a 3D spherical harmonic to a 2D linear potential. The change can be done adiabatically or nonadiabatically by switching off the axial confinement slowly, or instantaneously respectively. This opens up the possibility to study 1D nonlinear atom optics. In combination with, e.g., far detuned light sheets, a Fabry-Perot type interferometer for a condensate might be realizable. Our experiments are performed in a vacuum system with two magneto-optical traps, which serves as the source of cold atoms for the magnetic trap. 10/sup 9/ atoms are captured in less than one minute. RF-induced evaporative cooling is used to increase the phase space density of the trapped atomic cloud. The BEC phase transition occurs at a temperature of 550 nK with 10/sup 6/ particles in the trap. Pure condensates with more than 10/sup 5/ atoms were produced.

Conference on Lasers and Electro-Optics•Nov 27, 2002•0 citations

Large atom number Bose-Einstein condensate of sodium

K. M. R. van der Stam, Erik van Ooijen, R. Meppelink +2 more

We describe the setup to create a large Bose-Einstein condensate containing more than 120 x 10(6) atoms. In the experiment a thermal beam is slowed by a Zeeman slower and captured in a dark-spot magneto-optical trap (MOT). A typical dark-spot MOT in our experiments contains 2.0 x 10(10) atoms with a temperature of 320 microK and a density of about 1.0 x 10(11) atoms/cm(3). The sample is spin polarized in a high magnetic field before the atoms are loaded in the magnetic trap. Spin polarizing in a high magnetic field results in an increase in the transfer efficiency by a factor of 2 compared to experiments without spin polarizing. In the magnetic trap the cloud is cooled to degeneracy in 50 s by evaporative cooling. To suppress the three-body losses at the end of the evaporation, the magnetic trap is decompressed in the axial direction.

arXiv:physics/0609028•Review of Scientific Instruments•Jan 1, 2007•71 citations

Atom-chip Bose-Einstein condensation in a portable vacuum cell

Shengwang Du, Matthew B. Squires, Yutaka Imai +6 more

A $^{87}\mathrm{Rb}$ Bose-Einstein condensate (BEC) is produced in a portable atom-chip system less than $30\ifmmode\times\else\texttimes\fi{}30\ifmmode\times\else\texttimes\fi{}15\phantom{\rule{0.3em}{0ex}}\mathrm{cm}$, where the ultrahigh vacuum is maintained by a small, $8\phantom{\rule{0.3em}{0ex}}\mathrm{L}∕\mathrm{s}$, ion pump and nonevaporable getter. An aluminum nitride chip with lithographically patterned copper is used to seal the vacuum system, provide the electrical feedthroughs, and create the magnetic trap potentials. All cooling and trapping processes occur $0.6--2.5\phantom{\rule{0.3em}{0ex}}\mathrm{mm}$ from ambient laboratory air. A condensate of about 2000 $^{87}\mathrm{Rb}$ atoms in $F=2,{m}_{F}=2$ is achieved after $4.21\phantom{\rule{0.3em}{0ex}}\mathrm{s}$ of rf forced evaporation. A magneto-optical trap lifetime of $30\phantom{\rule{0.3em}{0ex}}\mathrm{s}$ indicates the vacuum near the chip surface is about ${10}^{\ensuremath{-}10}\phantom{\rule{0.3em}{0ex}}\text{torr}$. This work suggests that a chip-based BEC-compatible vacuum system can occupy a volume of less than $0.5\phantom{\rule{0.3em}{0ex}}\mathrm{L}$.

Physical Review A•Nov 10, 2004•122 citations

Bose–Einstein condensation in a QUIC trap

B Lu, William Arie van Wijngaarden

The apparatus and procedure required to generate a pure Bose-Einstein condensate (BEC) consisting of about half a million 87Rb atoms at a temperature of <60 nK with a phase density of >54 is described. The atoms are first laser cooled in a vapour cell magneto-optical trap (MOT) and subsequently transferred to an ultra-low pressure MOT. The atoms are loaded into a QUIC trap consisting of a pair of quadrupole coils and a Ioffe coil that generates a small finite magnetic field at the trap energy minimum to suppress Majorana transitions. Evaporation induced by an RF field lowers the temperature permitting the transition to BEC to be observed by monitoring the free expansion of the atoms after the trapping fields have been switched off.PACS Nos.: 03.75.Fi, 05.30.Jp, 32.80.Pj, 64.60.–i

Canadian Journal of Physics•Feb 1, 2004•17 citations
We report on Bose-Einstein condensation in a surface micro trap. The strongly anisotropic trapping potential is generated by a microstructure which consists of micro-fabricated linear copper conductors at a width ranging from 3 to 30 μm. The ratio of the trap frequencies for the motion in longitudinal and transverse direction can be varied continuously in a wide range up to values of 100.000. After capturing of 5×10 8 87 Rb atoms from a pulsed thermal dispenser source directly into a magneto-optical trap (MOT) the magnetically stored atoms are transfered into the micro trap by adiabatic transformation of the trapping potential. In the micro trap with high collision rate the atoms are cooled by forced evaporation into the degenerate regime. The pure condensate contains of up to 4×10 5 atoms. The complete in vacuo trap design is compatible with ultrahigh vacuum conditions below 2×10 −11 mbar.
Bose-Einstein condensation has been achieved in a magnetic surface microtrap with 4 x 10(5) (87)Rb atoms. The strongly anisotropic trapping potential is generated by a microstructure which consists of microfabricated linear copper conductor of widths ranging from 3 to 30 microm. After loading a high number of atoms from a pulsed thermal source directly into a magneto-optical trap the magnetically stored atoms are transferred into the microtrap by adiabatic transformation of the trapping potential. In the microtrap the atoms are cooled to condensation using forced rf-evaporation. The complete in vacuo trap design is compatible with ultrahigh vacuum below 2 x 10(-11) mbar.
Since its first observation in 1995, Bose-Einstein condensation (BEC) experiments in dilute gases have been performed with only a few different kinds of magnetic traps. We have performed a BEC experiment with /sup 87/Rb atoms in a Ioffe-Pritchard magnetic potential, which opens up the possibility to study, e.g., Bose-Einstein condensates released in only one dimension. Our trap consists of a clip-like coil, which generates a pure two-dimensional (2D) quadrupole field for radial confinement. The axial confinement is provided by two plane pinch coils inside the clip-coil. These two coils create a bottle field. Two additional Helmholtz coils on the same symmetry axis are used to compensate the homogeneous part of the bottle field. By continuously varying the currents through the coils, the trapping potential can be changed from a 3D spherical harmonic to a 2D linear potential. The change can be done adiabatically or nonadiabatically by switching off the axial confinement slowly, or instantaneously respectively. This opens up the possibility to study 1D nonlinear atom optics. In combination with, e.g., far detuned light sheets, a Fabry-Perot type interferometer for a condensate might be realizable. Our experiments are performed in a vacuum system with two magneto-optical traps, which serves as the source of cold atoms for the magnetic trap. 10/sup 9/ atoms are captured in less than one minute. RF-induced evaporative cooling is used to increase the phase space density of the trapped atomic cloud. The BEC phase transition occurs at a temperature of 550 nK with 10/sup 6/ particles in the trap. Pure condensates with more than 10/sup 5/ atoms were produced.
Summary form only given.Since its first observation in 1995, Bose-Einstein condensation (BEC) experiments in dilute gases have been performed with only a few different kinds of magnetic traps. We have performed a BEC experiment with /sup 87/Rb atoms in a Ioffe-Pritchard magnetic potential, which opens up the possibility to study, e.g., Bose-Einstein condensates released in only one dimension. Our trap consists of a clip-like coil, which generates a pure two-dimensional (2D) quadrupole field for radial confinement. The axial confinement is provided by two plane pinch coils inside the clip-coil. These two coils create a bottle field. Two additional Helmholtz coils on the same symmetry axis are used to compensate the homogeneous part of the bottle field. By continuously varying the currents through the coils, the trapping potential can be changed from a 3D spherical harmonic to a 2D linear potential. The change can be done adiabatically or nonadiabatically by switching off the axial confinement slowly, or instantaneously respectively. This opens up the possibility to study 1D nonlinear atom optics. In combination with, e.g., far detuned light sheets, a Fabry-Perot type interferometer for a condensate might be realizable. Our experiments are performed in a vacuum system with two magneto-optical traps, which serves as the source of cold atoms for the magnetic trap. 10/sup 9/ atoms are captured in less than one minute. RF-induced evaporative cooling is used to increase the phase space density of the trapped atomic cloud. The BEC phase transition occurs at a temperature of 550 nK with 10/sup 6/ particles in the trap. Pure condensates with more than 10/sup 5/ atoms were produced.
We describe the setup to create a large Bose-Einstein condensate containing more than 120 x 10(6) atoms. In the experiment a thermal beam is slowed by a Zeeman slower and captured in a dark-spot magneto-optical trap (MOT). A typical dark-spot MOT in our experiments contains 2.0 x 10(10) atoms with a temperature of 320 microK and a density of about 1.0 x 10(11) atoms/cm(3). The sample is spin polarized in a high magnetic field before the atoms are loaded in the magnetic trap. Spin polarizing in a high magnetic field results in an increase in the transfer efficiency by a factor of 2 compared to experiments without spin polarizing. In the magnetic trap the cloud is cooled to degeneracy in 50 s by evaporative cooling. To suppress the three-body losses at the end of the evaporation, the magnetic trap is decompressed in the axial direction.
A 87Rb^{87}\mathrm{Rb}87Rb Bose-Einstein condensate (BEC) is produced in a portable atom-chip system less than $30\ifmmode\times\else\texttimes\fi{}30\ifmmode\times\else\texttimes\fi{}15\phantom{\rule{0.3em}{0ex}}\mathrm{cm}$, where the ultrahigh vacuum is maintained by a small, 8L∕s8\phantom{\rule{0.3em}{0ex}}\mathrm{L}∕\mathrm{s}8L∕s, ion pump and nonevaporable getter. An aluminum nitride chip with lithographically patterned copper is used to seal the vacuum system, provide the electrical feedthroughs, and create the magnetic trap potentials. All cooling and trapping processes occur 0.6−−2.5mm0.6--2.5\phantom{\rule{0.3em}{0ex}}\mathrm{mm}0.6−−2.5mm from ambient laboratory air. A condensate of about 2000 87Rb^{87}\mathrm{Rb}87Rb atoms in F=2,mF=2F=2,{m}_{F}=2F=2,mF​=2 is achieved after 4.21s4.21\phantom{\rule{0.3em}{0ex}}\mathrm{s}4.21s of rf forced evaporation. A magneto-optical trap lifetime of 30s30\phantom{\rule{0.3em}{0ex}}\mathrm{s}30s indicates the vacuum near the chip surface is about ${10}^{\ensuremath{-}10}\phantom{\rule{0.3em}{0ex}}\text{torr}$. This work suggests that a chip-based BEC-compatible vacuum system can occupy a volume of less than 0.5L0.5\phantom{\rule{0.3em}{0ex}}\mathrm{L}0.5L.
The apparatus and procedure required to generate a pure Bose-Einstein condensate (BEC) consisting of about half a million 87Rb atoms at a temperature of <60 nK with a phase density of >54 is described. The atoms are first laser cooled in a vapour cell magneto-optical trap (MOT) and subsequently transferred to an ultra-low pressure MOT. The atoms are loaded into a QUIC trap consisting of a pair of quadrupole coils and a Ioffe coil that generates a small finite magnetic field at the trap energy minimum to suppress Majorana transitions. Evaporation induced by an RF field lowers the temperature permitting the transition to BEC to be observed by monitoring the free expansion of the atoms after the trapping fields have been switched off.PACS Nos.: 03.75.Fi, 05.30.Jp, 32.80.Pj, 64.60.–i