Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Emission spectrum of electromagnetic energy stored in a dynamically perturbed optical microcavity

Murray W. McCutcheon, Andras G. Pattantyus‐Abraham, Georg W. Rieger, Jeff F. Young

Published Jan 1, 2007• 31 citations
Publisher

Abstract

An ultrafast pump-probe experiment is performed on wavelength-scale, silicon-based, optical microcavities that confine light in three dimensions with resonant wavelengths near 1.5 mum, and lifetimes on the order of 20 ps. A below-bandgap probe pulse tuned to overlap the cavity resonant frequency is used to inject electromagnetic energy into the cavity, and an above-bandgap pump pulse is used to generate free carriers in the silicon, thus altering the real and imaginary components of the cavity's refractive index, and hence its resonant frequency and lifetime. When the pump pulse injects a carrier density of ~ 5 x10(17) cm(-3) before the resonant probe pulse strikes the sample, the emitted radiation from the cavity is blue-shifted by 16 times the bare cavity linewidth, and the new linewidth is 3.5 times wider than the original. When the pump pulse injects carriers, and thus suddenly perturbs the cavity properties after the probe pulse has injected energy into the cavity, we show that the emitted radiation is not simply a superposition of Lorentzians centred at the initial and perturbed cavity frequencies. Under these conditions, a simple model and the experimental results show that the power spectrum of radiation emitted by the stored electromagnetic energy when the cavity frequency is perturbed during ring-down consists of a series of coherent oscillations between the original and perturbed cavity frequencies, accompanied by a gradual decrease and broadening of the original cavity line, and the emergence of the new cavity resonance. The modified cavity lifetime is shown to have a significant impact on the evolution of the emission as a function of the pump-probe delay.

DOI
10.1364/oe.15.011472

Related papers

Er 3+ in strong light-confining microcavity

Michal F. Lipson, Lionel C. Kimerling

Er 3+ ions produce a sharp line emission that has small absorption cross section, long radiative lifetime, and is independent of external perturbations. These optical properties of the Er3+ ions limit the pumping efficiency and tunability of the emission line. In this work we present a study in which Er3+ emission was modified by coupling an ensemble of Er3+ ions to a microcavity resonance. The optical response of an optical cavity that consists of an Er2O3 layer confined between Si/SiO2 distributed Bragg reflectors is studied. When the cavity is in resonance with the optical transition of the Er3+ ions, the resonances in the reflectivity spectra split. The results are explained by a standard semiclassical model of atom–photon coupling.

Applied Physics Letters•Aug 21, 2000•23 citations

Time-resolved vacuum Rabi oscillations in a quantum-dot–nanocavity system

Kazuhiro Kuruma, Yasutomo Ota, Masahiro Kakuda +2 more

We report time domain observation of vacuum Rabi oscillations in a single quantum dot strongly coupled to a nanocavity under incoherent optical carrier injection. We realize a photonic crystal nanocavity with a very high quality factor of $>80\phantom{\rule{0.16em}{0ex}}000$ and employ it to clearly resolve the ultrafast vacuum Rabi oscillations by simple photoluminescence-based experiments. We found that the time domain vacuum Rabi oscillations were largely modified when changing the pump wavelength and intensity, even when marginal changes were detected in the corresponding photoluminescence spectra. We analyze the measured time domain oscillations by fitting to simulation curves obtained with a cavity quantum electrodynamics model. The observed modifications of the oscillation curves were mainly induced by the change in the carrier capture and dephasing dynamics in the quantum dot, as well as the change in bare-cavity emission. This result suggests that vacuum Rabi oscillations can be utilized as a highly sensitive probe for the quantum-dot dynamics. Our work points out a powerful alternative to conventional spectral-domain measurements for a deeper understanding of the vacuum Rabi dynamics in quantum-dot-based--cavity quantum electrodynamics systems.

arXiv:1803.05618•Physical review. B./Physical review. B•Jun 27, 2018•22 citations

Cavity switching: A novel resource for solid-state quantum optics

Tobias Sattler, Emanuel Peinke, Joël Bleuse +3 more

We present switching experiments performed on pillar microcavities containing a collection of quantum dots (QDs). Switching events are probed using QD luminescence, after ultrafast optical injection of free carriers. We observe large switching amplitudes (by as much as 20 linewidths), as well as differential switching of the pillar modes under inhomogeneous pumping. Through transient coupling of QDs with a cavity mode, cavity switching is used for the first time to generate ultrashort (down to 4ps!) pulses of spontaneous emission. Beyond this application, cavity switching can be used more generally to control CQED effects in the time domain.

International Conference on Transparent Optical Networks•Jul 1, 2017•5 citations

Dynamics of the excitations of a quantum dot in a microcavity

J. I. Perea, Diego Porras, C. Tejedor

We study the dynamics of a quantum dot embedded in a three-dimensional microcavity in the strong coupling regime in which the quantum dot exciton has an energy close to the frequency of a confined cavity mode. Under the continuous pumping of the system, the confined electron and hole can recombine either by spontaneous emission through a leaky mode or by stimulated emission of a cavity mode that can escape from the cavity. The numerical integration of a master equation including all these effects gives the dynamics of the density matrix. By using the quantum regression theorem, we compute the first- and second-order coherence functions required to calculate the photon statistics and the spectrum of the emitted light. Our main result is the determination of a range of parameters in which a state of cavity modes with Poissonian or sub-Poissonian (nonclassical) statistics can be built up within the microcavity. Depending on the relative values of pumping and rate of stimulated emission, either one or two peaks close to the excitation energy of the dot and/or to the natural frequency of the cavity are observed in the emission spectrum. The physics behind these results is discussed.

arXiv:cond-mat/0310570•Physical Review B•Sep 9, 2004•59 citations

Dynamic light storage based on controllable electromagnetically induced transparency effect

Liu-Ying Zeng, Jun-Fang Wu, Chao Li

We analytically and numerically investigate a signal light storing mechanism based on the controllable electromagnetically induced transparency (EIT) effect. We demonstrate that the isolation between the waveguide and the cavities cannot be achieved instantly as soon as the two cavities are tuned into resonance, no matter the index tuning rate is ultrafast or slow. We also investigate the temporal evolution features of the intracavity energy when the pulse during time is prolonged. We find many periodical oscillations of the trapped energy in both cavities, and they are entirely complementary. Our analysis shows that the adiabatic wavelength conversion in both cavities and a phase difference π between them play critical roles in this phenomenon.

Chinese Physics B•May 5, 2023•5 citations

Slow-light microcavities

Vincent Huet, Alphonse Rasoloniaina, Pierre Guillemé +7 more

Summary form only given. Optical microcavities with high quality factors Q are of great interest in integrated micro- and nanophotonics. Their narrow resonance and long photon lifetime (τcav) can be used in fundamental physics, sensing applications, microwave signal optical processing or for optical delay line and memory miniaturization [1]. Considering a Lorentzian resonance profile, the quality factor and the photon lifetime of a microcavity with a resonant angular frequency ωο = 2·πε/λ0reads: Q = ω0τcab= nG(ω0)LF/λ0, (1) where ngis the group index of the material constituting the microcavity, F is the finesse and L is the cavity round-trip length. The usual method to obtain ultra-high quality factors consists in optimizing the manufacturing process to reach high finesse values. Following this approach record quality factors up to 1011have been measured in millimetric CaF2 whispering gallery mode (WGM) resonators [2]. Otherwise, Eq. (1) shows that for a given finesse, the use of resonators made with slow-light materials displaying high group indices can also increase the quality factor. This method has already been successfully implemented in bulky resonators including a highly dispersive slow-light medium [3]. We have recently demonstrated that this approach can be applied to solid-state optical micro-resonators [4]. The slow-light effect was introduced thanks to population oscillations in an Er3+doped WGM fluoride glass microsphere (diameter 100 μm). Since the lifetime of the4I13/2level is very long (T ≈ 10 ms) strong group index up to 106can be obtained. Using a cavity-ring-down method (see Fig. 1) in a pump probe configuration, we have measured a photon lifetime of 2.5 ms at 1530 nm corresponding to a quality factor of 3 × 1012[4].

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•0 citations
An ultrafast pump-probe experiment is performed on wavelength-scale, silicon-based, optical microcavities that confine light in three dimensions with resonant wavelengths near 1.5 mum, and lifetimes on the order of 20 ps. A below-bandgap probe pulse tuned to overlap the cavity resonant frequency is used to inject electromagnetic energy into the cavity, and an above-bandgap pump pulse is used to generate free carriers in the silicon, thus altering the real and imaginary components of the cavity's refractive index, and hence its resonant frequency and lifetime. When the pump pulse injects a carrier density of ~ 5 x10(17) cm(-3) before the resonant probe pulse strikes the sample, the emitted radiation from the cavity is blue-shifted by 16 times the bare cavity linewidth, and the new linewidth is 3.5 times wider than the original. When the pump pulse injects carriers, and thus suddenly perturbs the cavity properties after the probe pulse has injected energy into the cavity, we show that the emitted radiation is not simply a superposition of Lorentzians centred at the initial and perturbed cavity frequencies. Under these conditions, a simple model and the experimental results show that the power spectrum of radiation emitted by the stored electromagnetic energy when the cavity frequency is perturbed during ring-down consists of a series of coherent oscillations between the original and perturbed cavity frequencies, accompanied by a gradual decrease and broadening of the original cavity line, and the emergence of the new cavity resonance. The modified cavity lifetime is shown to have a significant impact on the evolution of the emission as a function of the pump-probe delay.
Er 3+ ions produce a sharp line emission that has small absorption cross section, long radiative lifetime, and is independent of external perturbations. These optical properties of the Er3+ ions limit the pumping efficiency and tunability of the emission line. In this work we present a study in which Er3+ emission was modified by coupling an ensemble of Er3+ ions to a microcavity resonance. The optical response of an optical cavity that consists of an Er2O3 layer confined between Si/SiO2 distributed Bragg reflectors is studied. When the cavity is in resonance with the optical transition of the Er3+ ions, the resonances in the reflectivity spectra split. The results are explained by a standard semiclassical model of atom–photon coupling.
We report time domain observation of vacuum Rabi oscillations in a single quantum dot strongly coupled to a nanocavity under incoherent optical carrier injection. We realize a photonic crystal nanocavity with a very high quality factor of >80000>80\phantom{\rule{0.16em}{0ex}}000>80000 and employ it to clearly resolve the ultrafast vacuum Rabi oscillations by simple photoluminescence-based experiments. We found that the time domain vacuum Rabi oscillations were largely modified when changing the pump wavelength and intensity, even when marginal changes were detected in the corresponding photoluminescence spectra. We analyze the measured time domain oscillations by fitting to simulation curves obtained with a cavity quantum electrodynamics model. The observed modifications of the oscillation curves were mainly induced by the change in the carrier capture and dephasing dynamics in the quantum dot, as well as the change in bare-cavity emission. This result suggests that vacuum Rabi oscillations can be utilized as a highly sensitive probe for the quantum-dot dynamics. Our work points out a powerful alternative to conventional spectral-domain measurements for a deeper understanding of the vacuum Rabi dynamics in quantum-dot-based--cavity quantum electrodynamics systems.
We present switching experiments performed on pillar microcavities containing a collection of quantum dots (QDs). Switching events are probed using QD luminescence, after ultrafast optical injection of free carriers. We observe large switching amplitudes (by as much as 20 linewidths), as well as differential switching of the pillar modes under inhomogeneous pumping. Through transient coupling of QDs with a cavity mode, cavity switching is used for the first time to generate ultrashort (down to 4ps!) pulses of spontaneous emission. Beyond this application, cavity switching can be used more generally to control CQED effects in the time domain.
We study the dynamics of a quantum dot embedded in a three-dimensional microcavity in the strong coupling regime in which the quantum dot exciton has an energy close to the frequency of a confined cavity mode. Under the continuous pumping of the system, the confined electron and hole can recombine either by spontaneous emission through a leaky mode or by stimulated emission of a cavity mode that can escape from the cavity. The numerical integration of a master equation including all these effects gives the dynamics of the density matrix. By using the quantum regression theorem, we compute the first- and second-order coherence functions required to calculate the photon statistics and the spectrum of the emitted light. Our main result is the determination of a range of parameters in which a state of cavity modes with Poissonian or sub-Poissonian (nonclassical) statistics can be built up within the microcavity. Depending on the relative values of pumping and rate of stimulated emission, either one or two peaks close to the excitation energy of the dot and/or to the natural frequency of the cavity are observed in the emission spectrum. The physics behind these results is discussed.
We analytically and numerically investigate a signal light storing mechanism based on the controllable electromagnetically induced transparency (EIT) effect. We demonstrate that the isolation between the waveguide and the cavities cannot be achieved instantly as soon as the two cavities are tuned into resonance, no matter the index tuning rate is ultrafast or slow. We also investigate the temporal evolution features of the intracavity energy when the pulse during time is prolonged. We find many periodical oscillations of the trapped energy in both cavities, and they are entirely complementary. Our analysis shows that the adiabatic wavelength conversion in both cavities and a phase difference π between them play critical roles in this phenomenon.
Summary form only given. Optical microcavities with high quality factors Q are of great interest in integrated micro- and nanophotonics. Their narrow resonance and long photon lifetime (τcav) can be used in fundamental physics, sensing applications, microwave signal optical processing or for optical delay line and memory miniaturization [1]. Considering a Lorentzian resonance profile, the quality factor and the photon lifetime of a microcavity with a resonant angular frequency ωο = 2·πε/λ0reads: Q = ω0τcab= nG(ω0)LF/λ0, (1) where ngis the group index of the material constituting the microcavity, F is the finesse and L is the cavity round-trip length. The usual method to obtain ultra-high quality factors consists in optimizing the manufacturing process to reach high finesse values. Following this approach record quality factors up to 1011have been measured in millimetric CaF2 whispering gallery mode (WGM) resonators [2]. Otherwise, Eq. (1) shows that for a given finesse, the use of resonators made with slow-light materials displaying high group indices can also increase the quality factor. This method has already been successfully implemented in bulky resonators including a highly dispersive slow-light medium [3]. We have recently demonstrated that this approach can be applied to solid-state optical micro-resonators [4]. The slow-light effect was introduced thanks to population oscillations in an Er3+doped WGM fluoride glass microsphere (diameter 100 μm). Since the lifetime of the4I13/2level is very long (T ≈ 10 ms) strong group index up to 106can be obtained. Using a cavity-ring-down method (see Fig. 1) in a pump probe configuration, we have measured a photon lifetime of 2.5 ms at 1530 nm corresponding to a quality factor of 3 × 1012[4].