Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Letters

Production of a Fully Spin-Polarized Ensemble of Positronium Atoms

D. B. Cassidy, V. E. Meligne, Allen Paine Mills

Published Apr 27, 2010• 62 citations
Publisher

Abstract

Long-lived |m|=1 positronium (Ps) atoms are produced in vacuum when high density bursts of positrons with net polarization p{0} are implanted into a porous silica film in a 2.3 T magnetic field. We observe a decrease in the |m|=1 population as the density of the incident positron beam is increased due to quenching interactions between oppositely polarized Ps atoms within the target. Saturation of this density dependent quenching indicates that the initial positron spin polarization p{0}=28+/-1%, and demonstrates the long term (10{2} s) survival of positron polarization in a Surko-type buffer gas trap. We conclude that, at high Ps densities, the minority spin component is essentially eliminated and the remaining Ps is almost entirely (approximately 96%) polarized, as required for the formation of a Ps Bose-Einstein condensate.

DOI
10.1103/physrevlett.104.173401

Related papers

Possible experiments with high density positronium

Allen Paine Mills

Although it can probably only exist within a confining potential, a positronium (Ps) Bose-Einstein condensate (BEC) would be interesting because it could be viewed as the ultimate member of Wheeler’s polyelectron series, e+, Ps, Ps−, Ps+, Ps2, …, Ps-BEC [1], not counting high density neutral e+-e− plasmas. A Ps-BEC could be a source of very cold Ps atoms for precision spectroscopy, for gravitation experiments, and as the gain medium for an annihilation gamma ray laser [2]. It would also be interesting to look for other effects that are non-linear in the positron density, such as the production of Ps+ ions and highly polarized positrons at a metal surface. Specifically, a process in which one thermalized bulk positron passes into the vacuum accompanied by an electron and a surface positron (surface pseudo-Ps) to form a Ps+ ion in vacuum, e+solid + Pssurf → Ps+vac + □E, is energetically allowed for a Ni(100) remoderator surface, for which + □E = 1.00 eV. The positive ions could be used in an experiment in which one positron undergoes a process in a material and the other positron reports on the process via its subsequent Ps emission, etc. Since the two positrons involved in the formation of Ps+ and Ps2 must have opposite spins, at sufficiently high implanted positron densities the minority positron spins will be significantly depleted by these processes, resulting in the enhancement of the spin polarization of the reemitted positrons which might be useful for spin polarized angle-resolved positronium emission spectroscopy of the electronic structure of solids and surfaces.

AIP conference proceedings•Jan 1, 2019•11 citations

Conditions for obtaining positronium Bose–Einstein condensation in a micron-sized cavity

Marcus X. Asaro, Steven A. Herrera, Melina Fuentes-Garcia +4 more

Abstract The quest for making a triplet positronium (Ps) Bose–Einstein condensate confined in a micron-sized cavity in a material such as porous silica faces at least three interrelated problems: (1) About $$10^7$$ 10 7 spin polarized Ps atoms must be injected into a small cavity within a porous solid material without vaporizing it. (2) It is known that Ps atoms confined in 30–100 nm diameter cavities in porous silica do not remain in the gas phase, but become stuck to the cavity walls at room temperature (Cooper et al., Phys. Rev. B 97:205302, 2018). (3) Cooling a gas of Ps atoms to cryogenic temperatures by energy exchange with the walls would be a very slow process (Saito and Hyodo, in: Surko, Gianturco (eds) New Directions in Antimatter Chemistry and Physics, Springer Dordrecht, Netherlands, 2001) because of the relatively low collision rate with the walls and the large mismatch between the masses of the Ps and the wall atoms. A possible solution of these difficulties is presented, based on cooling the implanted positrons in an isotopically pure diamond single crystal target, subsequent saturating of the wall Ps coverage so that a substantial portion of the Ps will be in the gaseous state, and thermalizing the gas-phase Ps via collisions with the low effective mass wall Ps. A design process for the target material is outlined as well, including preliminary results in porous cavity fabrication using focused ion beam milling. Graphical abstract

The European Physical Journal D•Jun 1, 2022•5 citations

Physics with Cold Polarized Positronium

D. B. Cassidy, L. Elouadrhiri, Jospeh Grames +3 more

Positronium (Ps) atoms exist in different spin configurations that determine their fundamental properties, such as energy level structure, decay rate and response to a magnetic field. The nature of interactions between Ps atoms is also strongly influenced by their relative spin states; oppositely polarized Ps atoms may exchange particles and scatter into different states, or join together to form molecular positronium. Conversely, interactions between spin aligned Ps atoms cannot lead directly to changes of spin states or molecule formation, but at high densities/low temperatures a collection of such atoms may undergo a phase transition to form a Bose-Einstein condensate. Here I consider some of the physics involved in such interactions and the positron beam parameters required to conduct such experiments.

AIP conference proceedings•Jan 1, 2009•0 citations

Spin-Orbit Quenching of Positronium during Atomic Collisions

Jim Mitroy, S. A. Novikov

When positrons are injected into a gas, 75% of the positronium (Ps) is likely to be formed as long-lived ortho-Ps. The main decay mechanisms for the ortho-Ps have been assumed to be natural decay of ortho-Ps and pickoff annihilation of the positron during Ps-atom collisions. A third possibility for annihilation is $\mathrm{o}\mathrm{r}\mathrm{t}\mathrm{h}\mathrm{o}\mathrm{\text{\ensuremath{-}}}\mathrm{P}\mathrm{s}\ensuremath{\rightarrow}\mathrm{p}\mathrm{a}\mathrm{r}\mathrm{a}\mathrm{\text{\ensuremath{-}}}\mathrm{P}\mathrm{s}$ conversion due to the spin-orbit interaction between the atom and colliding Ps. This extra quenching mechanism may explain a number of phenomena observed in the annihilation spectrum of Kr and Xe, including the very small Ps fraction of 3% seen for Xe.

Physical Review Letters•May 8, 2003•30 citations

Positronium cooling in porous silica measured via Doppler spectroscopy

D. B. Cassidy, P. Crivelli, T. H. Hisakado +5 more

We have measured the kinetic energy of positronium (Ps) atoms emitted into a vacuum from a porous silica film subsequent to positron bombardment, via the Doppler spread of the linewidth of the Ps ${1}^{3}S$-${2}^{3}P$ transition. We find that the deeper in the target film that positrons are implanted the colder is the emitted Ps, an effect we attribute to cooling via collisions in the pores as the atoms diffuse back to the film surface. We observed a lower limit to the mean Ps kinetic energy associated with motion in the direction of the laser, ${E}_{x}=42\ifmmode\pm\else\textpm\fi{}3$ meV, that is consistent with conversion of the confinement energy of Ps in the 2.7-nm-diameter pores to kinetic energy in vacuum. An implication is that a porous sample would need to be composed of pores greater than around 10 nm in diameter in order to produce thermal Ps in vacuum with temperatures of less than 100 K. By performing Doppler spectroscopy on intense pulses of Ps we have experimentally demonstrated the production of many excited-state Ps atoms simultaneously, which could have numerous applications, including laser cooling and fundamental spectroscopic studies of Ps and the production of antihydrogen.

Physical Review A•Jan 29, 2010•144 citations

Bose-Einstein condensation of positronium in silica pores

Omar Morandi, Paul-Antoine Hervieux, Giovanni Manfredi

We investigate the possibility to produce a Bose-Einstein condensate made of positronium atoms in a porous silica material containing isolated nanometric cavities. The evolution equation of a weakly interacting positronium system is presented. The model includes the interactions among the atoms in the condensate, the surrounding gas of noncondensed atoms, and the pore surface. The final system is expressed by the Boltzmann evolution equation for noncondensed particles coupled with the Gross-Pitaevskii equation for the condensate. In particular, we focus on the estimation of the time necessary to form a condensate containing a macroscopic fraction of the positronium atoms initially injected in the material. The numerical simulations reveal that the condensation process is compatible with the lifetime of ortho-positronium.

Physical Review A•Mar 6, 2014•20 citations
Long-lived |m|=1 positronium (Ps) atoms are produced in vacuum when high density bursts of positrons with net polarization p{0} are implanted into a porous silica film in a 2.3 T magnetic field. We observe a decrease in the |m|=1 population as the density of the incident positron beam is increased due to quenching interactions between oppositely polarized Ps atoms within the target. Saturation of this density dependent quenching indicates that the initial positron spin polarization p{0}=28+/-1%, and demonstrates the long term (10{2} s) survival of positron polarization in a Surko-type buffer gas trap. We conclude that, at high Ps densities, the minority spin component is essentially eliminated and the remaining Ps is almost entirely (approximately 96%) polarized, as required for the formation of a Ps Bose-Einstein condensate.
Although it can probably only exist within a confining potential, a positronium (Ps) Bose-Einstein condensate (BEC) would be interesting because it could be viewed as the ultimate member of Wheeler’s polyelectron series, e+, Ps, Ps−, Ps+, Ps2, …, Ps-BEC [1], not counting high density neutral e+-e− plasmas. A Ps-BEC could be a source of very cold Ps atoms for precision spectroscopy, for gravitation experiments, and as the gain medium for an annihilation gamma ray laser [2]. It would also be interesting to look for other effects that are non-linear in the positron density, such as the production of Ps+ ions and highly polarized positrons at a metal surface. Specifically, a process in which one thermalized bulk positron passes into the vacuum accompanied by an electron and a surface positron (surface pseudo-Ps) to form a Ps+ ion in vacuum, e+solid + Pssurf → Ps+vac + □E, is energetically allowed for a Ni(100) remoderator surface, for which + □E = 1.00 eV. The positive ions could be used in an experiment in which one positron undergoes a process in a material and the other positron reports on the process via its subsequent Ps emission, etc. Since the two positrons involved in the formation of Ps+ and Ps2 must have opposite spins, at sufficiently high implanted positron densities the minority positron spins will be significantly depleted by these processes, resulting in the enhancement of the spin polarization of the reemitted positrons which might be useful for spin polarized angle-resolved positronium emission spectroscopy of the electronic structure of solids and surfaces.
Abstract The quest for making a triplet positronium (Ps) Bose–Einstein condensate confined in a micron-sized cavity in a material such as porous silica faces at least three interrelated problems: (1) About 10710^7107 10 7 spin polarized Ps atoms must be injected into a small cavity within a porous solid material without vaporizing it. (2) It is known that Ps atoms confined in 30–100 nm diameter cavities in porous silica do not remain in the gas phase, but become stuck to the cavity walls at room temperature (Cooper et al., Phys. Rev. B 97:205302, 2018). (3) Cooling a gas of Ps atoms to cryogenic temperatures by energy exchange with the walls would be a very slow process (Saito and Hyodo, in: Surko, Gianturco (eds) New Directions in Antimatter Chemistry and Physics, Springer Dordrecht, Netherlands, 2001) because of the relatively low collision rate with the walls and the large mismatch between the masses of the Ps and the wall atoms. A possible solution of these difficulties is presented, based on cooling the implanted positrons in an isotopically pure diamond single crystal target, subsequent saturating of the wall Ps coverage so that a substantial portion of the Ps will be in the gaseous state, and thermalizing the gas-phase Ps via collisions with the low effective mass wall Ps. A design process for the target material is outlined as well, including preliminary results in porous cavity fabrication using focused ion beam milling. Graphical abstract
Positronium (Ps) atoms exist in different spin configurations that determine their fundamental properties, such as energy level structure, decay rate and response to a magnetic field. The nature of interactions between Ps atoms is also strongly influenced by their relative spin states; oppositely polarized Ps atoms may exchange particles and scatter into different states, or join together to form molecular positronium. Conversely, interactions between spin aligned Ps atoms cannot lead directly to changes of spin states or molecule formation, but at high densities/low temperatures a collection of such atoms may undergo a phase transition to form a Bose-Einstein condensate. Here I consider some of the physics involved in such interactions and the positron beam parameters required to conduct such experiments.
When positrons are injected into a gas, 75% of the positronium (Ps) is likely to be formed as long-lived ortho-Ps. The main decay mechanisms for the ortho-Ps have been assumed to be natural decay of ortho-Ps and pickoff annihilation of the positron during Ps-atom collisions. A third possibility for annihilation is $\mathrm{o}\mathrm{r}\mathrm{t}\mathrm{h}\mathrm{o}\mathrm{\text{\ensuremath{-}}}\mathrm{P}\mathrm{s}\ensuremath{\rightarrow}\mathrm{p}\mathrm{a}\mathrm{r}\mathrm{a}\mathrm{\text{\ensuremath{-}}}\mathrm{P}\mathrm{s}$ conversion due to the spin-orbit interaction between the atom and colliding Ps. This extra quenching mechanism may explain a number of phenomena observed in the annihilation spectrum of Kr and Xe, including the very small Ps fraction of 3% seen for Xe.
We have measured the kinetic energy of positronium (Ps) atoms emitted into a vacuum from a porous silica film subsequent to positron bombardment, via the Doppler spread of the linewidth of the Ps 13S{1}^{3}S13S-23P{2}^{3}P23P transition. We find that the deeper in the target film that positrons are implanted the colder is the emitted Ps, an effect we attribute to cooling via collisions in the pores as the atoms diffuse back to the film surface. We observed a lower limit to the mean Ps kinetic energy associated with motion in the direction of the laser, ${E}_{x}=42\ifmmode\pm\else\textpm\fi{}3$ meV, that is consistent with conversion of the confinement energy of Ps in the 2.7-nm-diameter pores to kinetic energy in vacuum. An implication is that a porous sample would need to be composed of pores greater than around 10 nm in diameter in order to produce thermal Ps in vacuum with temperatures of less than 100 K. By performing Doppler spectroscopy on intense pulses of Ps we have experimentally demonstrated the production of many excited-state Ps atoms simultaneously, which could have numerous applications, including laser cooling and fundamental spectroscopic studies of Ps and the production of antihydrogen.
We investigate the possibility to produce a Bose-Einstein condensate made of positronium atoms in a porous silica material containing isolated nanometric cavities. The evolution equation of a weakly interacting positronium system is presented. The model includes the interactions among the atoms in the condensate, the surrounding gas of noncondensed atoms, and the pore surface. The final system is expressed by the Boltzmann evolution equation for noncondensed particles coupled with the Gross-Pitaevskii equation for the condensate. In particular, we focus on the estimation of the time necessary to form a condensate containing a macroscopic fraction of the positronium atoms initially injected in the material. The numerical simulations reveal that the condensation process is compatible with the lifetime of ortho-positronium.