Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics Letters

Measuring Transmittance in Rubidium Vapour Cells Using an Extremely Weak Coherent Field of Light

Jianliao Deng, Li Yong-Qing, Wang Yu-Zhu

Published Aug 29, 2003• 1 citation
Publisher

Abstract

The absorptive properties of the atomic transition in the Rb 85 D2 (A) line (5S 1/2 -5P 3/2 ) at 780.0 nm are measured by using a continuous tunable diode laser and a CCD detector in Rb vapour cell under the condition of extremely weak incident intensity. When the intensity of incident light decreases from 420 pW/cm 2 to 0.03 pW/cm 2 , the transmittance is found to be independent of the incident intensity within our experimental accuracy.

DOI
10.1088/0256-307x/20/9/327

Related papers

Rubidium Absorption Spectroscopy

Ignacio E. Olivares

In this chapter, we present a study of laser absorption in neutral rubidium vapor at a wavelength of 780 nm. The experiments were conducted using a tunable external cavity diode laser tuned to the https://www.w3.org/1998/Math/MathML" display="inline"> 85 Rb − D 2 transition line. We modeled the dependence of the laser transmission on the incident intensity using the optical Bloch equations described previously, comparing the theoretical results with the experimental data. Furthermore, the calculations were extended to the regime of saturated absorption spectroscopy, where the theoretical predictions were rigorously compared with the measured saturated absorption spectra.

CRC Press eBooks•Nov 6, 2026•0 citations

Straightforward Measurement of Saturation Intensity of Doppler-Broadened Transitions: Application to Rubidium Vapour

Omid Mozafar, Varun Sharma, R. Margoth Córdova‐Castro +3 more

The commonly quoted saturation intensity of rubidium (Rb) for D2 transitions is 16.7$\mathrm{W}.\mathrm{m}^{-2}$. This value, however, is only accurate for the cycling transition, which renders the Rb atom to resemble a two-level system. In practice, the effective saturation intensity is influenced by various factors, such as the polarization of light, optical pumping, and atom collision which can redistribute the population. As a result, it is crucial to experimentally determine the effective saturation intensity. In this context, we demonstrate a novel yet simple experimental method to measure the effective saturation intensities of Doppler-broadened transitions in atomic vapours. Our method only requires on-resonance absorbance data for various input laser intensities, which can be obtained with a tunable CW laser without the need for precise frequency locking. We applied this method to measure the effective saturation intensities of all four Doppler-broadened D2 transitions in natural rubidium (Rb) vapour (27.8%87Rb and 72.2 %${}^{\text{8}} {}^{\text{5}}Rb$) at$r={35}^{\circ} \mathrm{C}$. The results show that the effective saturation intensities for Rb range from 0.752 to 16.8$\mathrm{W}.\mathrm{m}^{-2}$. Notably, for certain transitions (specifically, repump transitions), the effective saturation intensities were smaller than 16.7 W.$\mathrm{m}^{-2}$(up to an order of magnitude), with potentially important implications for optical pumping in Doppler-broadened transitions.

Photonics North (PN)•May 28, 2024•0 citations

Cs vapour cells: absorption and fluorescence may vary by several orders of magnitude

David G. Sarkisyan, Yu. P. Malakyan, A. Papoyan +2 more

Summary form only given. We have studied the absorption and fluorescence of the D/sub 2/ line [6S/sub 1/2/(F=3,4)-6P/sub 3/2/(F=2,3,4.5)] in dilute Cs atomic vapour for 3 vapour cells: an extremely thin cell with a column length of 8 /spl mu/m, a 16.5 mm-long cell with pure Cs vapour, and a 10.4 mm-long Cs cell containing 40 Torr of Ne. A laser diode with a 20 MHz-linewidth and the maximum intensity of 40 mW/cm/sup 2/ was used. In order to have a comparable peak absorption (for the case of low laser intensity), the extremely thin cell was heated to /spl sim/100/spl deg/C. The effective absorption cross-sections of these cells versus laser intensity are shown. It is important to note that the same behaviour was observed for the resonance fluorescence. The effect of optical pumping of Zeeman sublevels, leads to a dramatically different behaviour of absorption for the /spl nu//sub 3/ and the /spl nu//sub 4/ transitions at a laser intensity /spl ges/0.1 mW/cm/sup 3/ and the absorption of /spl nu//sub 3/ is very sensitive to the presence of a weak external magnetic field. Meanwhile, there is no hint for this effect both for the extremely thin and the buffer gas-filled cells.

Conference on Lasers and Electro-Optics•Aug 29, 2005•1 citation

Study of atomic transition self-broadening and shift with the help of a nano-cell

T. Varzhapetyan, Ani Nersisyan, V Babushkin +3 more

We demonstrate experimentally that it is possible to detect and measure the self-broadening rate and frequency shift of the rubidium second principal series atomic transitions at very high atomic vapour densities up to ∼10 17 cm -3 .The experimental procedure includes the usual absorption measurement technique and a sealed-off nano-cell containing Rb vapour operating at high temperatures with a thickness of L = λ/2, where λ is the resonant wavelength (420 nm).

Journal of Physics B Atomic Molecular and Optical Physics•Sep 3, 2008•15 citations

[Spectroscopic investigation of retrofluorescence in a pure optically thick Rb vapour near the surface].

Xiaoyan Shen, Jing Liu, Qi-cun Guo +2 more

A low-power tunable laser was used to populate the Rb(5P(3/2)) hyperfine-structure levels in a pure optically thick vapour in the presence of a dissipative surface. The retrofluorescence intensities and spectrum profile for the 780 nm (5P(3/2)--> 5S(1/2)) and 795 nm (5P(1/2)-->5S(1/2)) lines were measured and analyzed. The glass-vapor interface was considered as two distinct regions, a wavelength-thickness vapor layer adjacent to the surface and a more remote vapor region The first region was analyzed as a spectral filter that annihilated the absorbed photons and the second one as a rich spectral light source. The authors discussed two possible mechanisms for the 5P(1/2) population in the cell [i.e., mechanism(1): collisions Rb(5P(3/2))+Rb(5S(1/2))-->Rb(5P(1/2))+Rb(5S(1/2)); mechanism(2): collisions Rb(5D)+Rb(5S)-->Rb(5P)+Rb(5P)]. For each one of the possible mechanisms considered, the authors gave the theoretical formulation of the retrofluorescence integrated signal associated with 795 nm(5P(1/2)-->5S(1/2)), which was compared with experiment. Two important characteristic aspects of retrofluorescence spectra must be taken into account when dealing with retrofluorescence signals for atomic process investigation: the retrofluorescence intensity dependence on laser power and sensitized laser retrofluorescence line shapes. When the laser frequency is scanned through the hyperfine resonance line, the sensitized retrofluorescence spectra signal corresponding to the 795 nm line has a profile similar to the profile of the retrofluorescence signal at the 780 nm. The authors have pointed out that mechanism(1) gives the linear dependence of the trtrofluorescence as a function of laser power and the spectrum profile. The population of the 5P(1/2) atomic level in an optically thick vapour can be principally explained by the fine-structure excitation transfer process [mechanism(1)]. It appears from our experimental and theoretical investigations that, the spectral properties of the laser-induced Rb 795 nm sensitized retrofluorescence in a pure optically thick vapour near a dissipative surface cannot be explained by the mechanism(2).

•May 1, 2009•0 citations

Experimental studies of the D2 line of 87 Rb vapour at 1.5 Tesla

Virginia R. Marshall

An investigation into the temperature evolution of transmission and absorption coefficient spectra of Rubidium atoms in the hyperfine Paschen-Back regime was successfully undertaken for a continuous laser detuning of approximately 150 GHz. All experiments were undertaken using a 1 mm long cell of isotopically enhanced 87Rb. The magnet used had a peak field of 1.54 T. The forms of both the S0 and S1 Stokes Parameters showed excellent agreement with the theory from ElecSus at temperatures ranging from 56◦C to 160◦C, with the S0 parameter also agreeing in narrow-band spectra of up to 20 GHz.The absorption coefficient ratio of strong transitions, expected to be equal to 3.00, was measured to be within their uncertainty of this value when a possible temperature fluctuation of <1 K was taken into account. Both the strong and weak transitions were measured and compared to the theory from ElecSus, which was found to successfully predict the behaviour of 87Rb atoms in the hyperfine Paschen-Back regime. Areas of expansion and improvement of the ElecSus program were identified.The power evolution of the D2 line of Rubidium was also investigated for a narrow beam of w < 0.4 mm in both no external magnetic field and the hyperfine Paschen-Back regime. The inhomogeneous shape of the power evolution was found to not fit the data, while the χ2 analysis showed that the homogeneous shape was better. The Weak Probe regime was found to be reached at values of I/Isat up to 2 orders of magnitude higher than the 1e−3 found previously. This provides possibilities for applications such that the SNR can be increased when measuring transmission or absorption coefficients. It is unclear whether the use of a magnetic field significantly changes the intensity required to reach the Weak Probe regime. This should be investigated using a wider beam, with a different experimental cell.

•Jan 1, 2017•1 citation
The absorptive properties of the atomic transition in the Rb 85 D2 (A) line (5S 1/2 -5P 3/2 ) at 780.0 nm are measured by using a continuous tunable diode laser and a CCD detector in Rb vapour cell under the condition of extremely weak incident intensity. When the intensity of incident light decreases from 420 pW/cm 2 to 0.03 pW/cm 2 , the transmittance is found to be independent of the incident intensity within our experimental accuracy.
In this chapter, we present a study of laser absorption in neutral rubidium vapor at a wavelength of 780 nm. The experiments were conducted using a tunable external cavity diode laser tuned to the https://www.w3.org/1998/Math/MathML" display="inline"> 85 Rb − D 2 transition line. We modeled the dependence of the laser transmission on the incident intensity using the optical Bloch equations described previously, comparing the theoretical results with the experimental data. Furthermore, the calculations were extended to the regime of saturated absorption spectroscopy, where the theoretical predictions were rigorously compared with the measured saturated absorption spectra.
The commonly quoted saturation intensity of rubidium (Rb) for D2 transitions is 16.7W.m−2\mathrm{W}.\mathrm{m}^{-2}W.m−2. This value, however, is only accurate for the cycling transition, which renders the Rb atom to resemble a two-level system. In practice, the effective saturation intensity is influenced by various factors, such as the polarization of light, optical pumping, and atom collision which can redistribute the population. As a result, it is crucial to experimentally determine the effective saturation intensity. In this context, we demonstrate a novel yet simple experimental method to measure the effective saturation intensities of Doppler-broadened transitions in atomic vapours. Our method only requires on-resonance absorbance data for various input laser intensities, which can be obtained with a tunable CW laser without the need for precise frequency locking. We applied this method to measure the effective saturation intensities of all four Doppler-broadened D2 transitions in natural rubidium (Rb) vapour (27.8%87Rb and 72.2 %85Rb{}^{\text{8}} {}^{\text{5}}Rb85Rb) atr=35∘Cr={35}^{\circ} \mathrm{C}r=35∘C. The results show that the effective saturation intensities for Rb range from 0.752 to 16.8W.m−2\mathrm{W}.\mathrm{m}^{-2}W.m−2. Notably, for certain transitions (specifically, repump transitions), the effective saturation intensities were smaller than 16.7 W.m−2\mathrm{m}^{-2}m−2(up to an order of magnitude), with potentially important implications for optical pumping in Doppler-broadened transitions.
Summary form only given. We have studied the absorption and fluorescence of the D/sub 2/ line [6S/sub 1/2/(F=3,4)-6P/sub 3/2/(F=2,3,4.5)] in dilute Cs atomic vapour for 3 vapour cells: an extremely thin cell with a column length of 8 /spl mu/m, a 16.5 mm-long cell with pure Cs vapour, and a 10.4 mm-long Cs cell containing 40 Torr of Ne. A laser diode with a 20 MHz-linewidth and the maximum intensity of 40 mW/cm/sup 2/ was used. In order to have a comparable peak absorption (for the case of low laser intensity), the extremely thin cell was heated to /spl sim/100/spl deg/C. The effective absorption cross-sections of these cells versus laser intensity are shown. It is important to note that the same behaviour was observed for the resonance fluorescence. The effect of optical pumping of Zeeman sublevels, leads to a dramatically different behaviour of absorption for the /spl nu//sub 3/ and the /spl nu//sub 4/ transitions at a laser intensity /spl ges/0.1 mW/cm/sup 3/ and the absorption of /spl nu//sub 3/ is very sensitive to the presence of a weak external magnetic field. Meanwhile, there is no hint for this effect both for the extremely thin and the buffer gas-filled cells.
A low-power tunable laser was used to populate the Rb(5P(3/2)) hyperfine-structure levels in a pure optically thick vapour in the presence of a dissipative surface. The retrofluorescence intensities and spectrum profile for the 780 nm (5P(3/2)--> 5S(1/2)) and 795 nm (5P(1/2)-->5S(1/2)) lines were measured and analyzed. The glass-vapor interface was considered as two distinct regions, a wavelength-thickness vapor layer adjacent to the surface and a more remote vapor region The first region was analyzed as a spectral filter that annihilated the absorbed photons and the second one as a rich spectral light source. The authors discussed two possible mechanisms for the 5P(1/2) population in the cell [i.e., mechanism(1): collisions Rb(5P(3/2))+Rb(5S(1/2))-->Rb(5P(1/2))+Rb(5S(1/2)); mechanism(2): collisions Rb(5D)+Rb(5S)-->Rb(5P)+Rb(5P)]. For each one of the possible mechanisms considered, the authors gave the theoretical formulation of the retrofluorescence integrated signal associated with 795 nm(5P(1/2)-->5S(1/2)), which was compared with experiment. Two important characteristic aspects of retrofluorescence spectra must be taken into account when dealing with retrofluorescence signals for atomic process investigation: the retrofluorescence intensity dependence on laser power and sensitized laser retrofluorescence line shapes. When the laser frequency is scanned through the hyperfine resonance line, the sensitized retrofluorescence spectra signal corresponding to the 795 nm line has a profile similar to the profile of the retrofluorescence signal at the 780 nm. The authors have pointed out that mechanism(1) gives the linear dependence of the trtrofluorescence as a function of laser power and the spectrum profile. The population of the 5P(1/2) atomic level in an optically thick vapour can be principally explained by the fine-structure excitation transfer process [mechanism(1)]. It appears from our experimental and theoretical investigations that, the spectral properties of the laser-induced Rb 795 nm sensitized retrofluorescence in a pure optically thick vapour near a dissipative surface cannot be explained by the mechanism(2).
An investigation into the temperature evolution of transmission and absorption coefficient spectra of Rubidium atoms in the hyperfine Paschen-Back regime was successfully undertaken for a continuous laser detuning of approximately 150 GHz. All experiments were undertaken using a 1 mm long cell of isotopically enhanced 87Rb. The magnet used had a peak field of 1.54 T. The forms of both the S0 and S1 Stokes Parameters showed excellent agreement with the theory from ElecSus at temperatures ranging from 56◦C to 160◦C, with the S0 parameter also agreeing in narrow-band spectra of up to 20 GHz.The absorption coefficient ratio of strong transitions, expected to be equal to 3.00, was measured to be within their uncertainty of this value when a possible temperature fluctuation of <1 K was taken into account. Both the strong and weak transitions were measured and compared to the theory from ElecSus, which was found to successfully predict the behaviour of 87Rb atoms in the hyperfine Paschen-Back regime. Areas of expansion and improvement of the ElecSus program were identified.The power evolution of the D2 line of Rubidium was also investigated for a narrow beam of w < 0.4 mm in both no external magnetic field and the hyperfine Paschen-Back regime. The inhomogeneous shape of the power evolution was found to not fit the data, while the χ2 analysis showed that the homogeneous shape was better. The Weak Probe regime was found to be reached at values of I/Isat up to 2 orders of magnitude higher than the 1e−3 found previously. This provides possibilities for applications such that the SNR can be increased when measuring transmission or absorption coefficients. It is unclear whether the use of a magnetic field significantly changes the intensity required to reach the Weak Probe regime. This should be investigated using a wider beam, with a different experimental cell.