Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Optics Letters

用于镱原子互组跃迁的556nm激光的高可靠性稳频

Zhuan-Xian Xiong, Yun Long, Huixing Xiao, Xi Zhang, Lingxiang He, Baolong Lv

Published Jan 1, 2011• 4 citations
Publisher

Abstract

A frequency-stabilized 556-nm laser is an essential tool for experimental studies associated with 1 S0-3 P1 intercombination transition of ytterbium (Yb) atoms.A 556-nm laser light using a single-pass second harmonic generation (SHG) is obtained in a periodically poled MgO:LiNbO3 (PPLN) crystal pumped by a fiber laser at 1111.6 nm.A robust frequency stabilization method which facilitates the control of laser frequency with an accuracy better than the natural linewidth (187 kHz) of the intercombination line is developed.The short-term frequency jitter is reduced to less than 100 kHz by locking the laser to a home-made reference cavity.A slow frequency drift is sensed by the 556-nm fluorescence signal of an Yb atomic beam excited by one probe beam and is reduced to less than 50-kHz by a computer-controlled servo system.The laser can be stably locked for more than 5 h.This frequency stabilization method can be extended to other alkaline-earth-like atoms with similar weak intercombination lines.

DOI
10.3788/col201109.041406

Related papers

Fiber-comb-stabilized light source at 556 nm for magneto-optical trapping of ytterbium

Masami Yasuda, Takuya Kohno, Hajime Inaba +4 more

A frequency-stabilized light source emitting at 556 nm is realized by frequency doubling a 1112 nm laser, which is phase locked to a fiber-based optical frequency comb. The 1112 nm laser is either an ytterbium (Yb)-doped distributed feedback fiber laser or a master-slave laser system that uses an external cavity diode laser as a master laser. We have achieved the continuous frequency stabilization of the light source over a 5 day period. With the light source, we have completed the second-stage magneto-optical trapping (MOT) of Yb atoms using the S10–P31 intercombination transition. The temperature of the ultracold atoms in the MOT was 40 μK when measured using the time-of-flight method, and this is sufficient for loading the atoms into an optical lattice. The fiber-based frequency comb is shown to be a useful tool for controlling the laser frequency in cold-atom experiments.

arXiv:1005.3152•Journal of the Optical Society of America B•Jun 15, 2010•25 citations

Frequency locking of a 399-nm laser referenced to fluorescence spectrum of an ytterbium atomic beam

Yun Long Yun Long, Zhuan-Xian Xiong, Xi Zhang +3 more

The laser cooling of ytterbium (Yb) atoms needs a 399-nm laser which operates on the strong 1 S0 -1 P1 transition and can be locked at the desired frequencies for different Yb isotopes.We demonstrate a frequency locking method using the fluorescence spectrum of an Yb atomic beam as a frequency reference.For unresolved fluorescence peaks, we make the spectrum of the even isotopes vanish by using the strong angular-dependence of the fluorescence radiations; the remained closely-spaced peaks are thus clearly resolved and able to serve as accurate frequency references.A computer-controlled servo system is used to lock the laser frequency to a single fluorescence peak of interest, and a frequency stability of 304 kHz is achieved.This frequency-locked laser enables us to realize stable blue magneto-optic-traps (MOT) for all abundant Yb isotopes.

Chinese Optics Letters•Jan 1, 2014•3 citations

Frequency Stabilization Technology of 1560 nm Fiber Laser Based on Rubidium Modulation Transfer Spectroscopy

Yang Bai, Jun Ruan, Dandan Liu +3 more

The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.

IEEE photonics journal•May 20, 2024•6 citations

Magneto-optical trapping of Yb atoms using an intercombination transition with an optical frequency comb: For realizing an Yb optical lattice clock

Masami Yasuda, T. Kohno, Feng-Lei Hong +6 more

We have magneto-optically trapped cold ytterbium atoms using an intercombination transition for realizing an optical lattice clock. For this purpose, we have developed a laser-diode-based light source, which is phase-locked to an optical frequency comb, thus attaining both laser frequency stabilization and laser linewidth narrowing.

Conference on Precision Electromagnetic Measurements•Jun 1, 2008•0 citations

Crossed-beam slowing to enhance narrow-line ytterbium magneto-optic traps

Benjamin Plotkin-Swing, Anna Wirth-Singh, Daniel Gochnauer +3 more

We demonstrate a method to enhance the atom loading rate of a ytterbium (Yb) magneto-optic trap (MOT) operating on the 556 nm 1S0 → 3P1 intercombination transition (narrow linewidth Γg = 2π × 182 kHz). Following traditional Zeeman slowing of an atomic beam near the 399 nm 1S0 → 1P1 transition (broad linewidth Γp = 2π × 29 MHz), two laser beams in a crossed-beam geometry, frequency tuned near the same transition, provide additional slowing immediately prior to the MOT. Using this technique, we observe an improvement by a factor of 6 in the atom loading rate of a narrow-line Yb MOT. The relative simplicity and generality of this approach make it readily adoptable to other experiments involving narrow-line MOTs. We also present a numerical simulation of this two-stage slowing process, which shows good agreement with the observed dependence on experimental parameters, and use it to assess potential improvements to the method.

arXiv:2004.10298•Review of Scientific Instruments•Sep 1, 2020•19 citations

Offset sideband locking to iodine for laser cooling on the 1 S 0 → 3 P 1 transition of 171 Yb

Martin Hauden, Jacques Millo, Martina Matusko +3 more

We present absolute frequency measurements of a laser stabilized using an offset sideband locking technique on the P(49)24-1 rovibrational transition of 127 I 2 near 556 nm. The P(49)24-1 transition is offset by 4.8 GHz from the intercombination transition of 171 Yb. A dual-tone electro-optical modulator is employed to bridge this frequency gap, enabling frequency stabilization of the 556 nm laser near the Yb transition, achieving a fractional frequency stability of 1.2 × 10 −11 at one second. We thoroughly characterize the frequency shifts associated with this locking scheme, with typical systematic effects fractional uncertainties of 9 × 10 −12 .

arXiv:2503.12895•Optics Express•Dec 4, 2024•0 citations
A frequency-stabilized 556-nm laser is an essential tool for experimental studies associated with 1 S0-3 P1 intercombination transition of ytterbium (Yb) atoms.A 556-nm laser light using a single-pass second harmonic generation (SHG) is obtained in a periodically poled MgO:LiNbO3 (PPLN) crystal pumped by a fiber laser at 1111.6 nm.A robust frequency stabilization method which facilitates the control of laser frequency with an accuracy better than the natural linewidth (187 kHz) of the intercombination line is developed.The short-term frequency jitter is reduced to less than 100 kHz by locking the laser to a home-made reference cavity.A slow frequency drift is sensed by the 556-nm fluorescence signal of an Yb atomic beam excited by one probe beam and is reduced to less than 50-kHz by a computer-controlled servo system.The laser can be stably locked for more than 5 h.This frequency stabilization method can be extended to other alkaline-earth-like atoms with similar weak intercombination lines.
A frequency-stabilized light source emitting at 556 nm is realized by frequency doubling a 1112 nm laser, which is phase locked to a fiber-based optical frequency comb. The 1112 nm laser is either an ytterbium (Yb)-doped distributed feedback fiber laser or a master-slave laser system that uses an external cavity diode laser as a master laser. We have achieved the continuous frequency stabilization of the light source over a 5 day period. With the light source, we have completed the second-stage magneto-optical trapping (MOT) of Yb atoms using the S10–P31 intercombination transition. The temperature of the ultracold atoms in the MOT was 40 μK when measured using the time-of-flight method, and this is sufficient for loading the atoms into an optical lattice. The fiber-based frequency comb is shown to be a useful tool for controlling the laser frequency in cold-atom experiments.
The laser cooling of ytterbium (Yb) atoms needs a 399-nm laser which operates on the strong 1 S0 -1 P1 transition and can be locked at the desired frequencies for different Yb isotopes.We demonstrate a frequency locking method using the fluorescence spectrum of an Yb atomic beam as a frequency reference.For unresolved fluorescence peaks, we make the spectrum of the even isotopes vanish by using the strong angular-dependence of the fluorescence radiations; the remained closely-spaced peaks are thus clearly resolved and able to serve as accurate frequency references.A computer-controlled servo system is used to lock the laser frequency to a single fluorescence peak of interest, and a frequency stability of 304 kHz is achieved.This frequency-locked laser enables us to realize stable blue magneto-optic-traps (MOT) for all abundant Yb isotopes.
The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.
We demonstrate a method to enhance the atom loading rate of a ytterbium (Yb) magneto-optic trap (MOT) operating on the 556 nm 1S0 → 3P1 intercombination transition (narrow linewidth Γg = 2π × 182 kHz). Following traditional Zeeman slowing of an atomic beam near the 399 nm 1S0 → 1P1 transition (broad linewidth Γp = 2π × 29 MHz), two laser beams in a crossed-beam geometry, frequency tuned near the same transition, provide additional slowing immediately prior to the MOT. Using this technique, we observe an improvement by a factor of 6 in the atom loading rate of a narrow-line Yb MOT. The relative simplicity and generality of this approach make it readily adoptable to other experiments involving narrow-line MOTs. We also present a numerical simulation of this two-stage slowing process, which shows good agreement with the observed dependence on experimental parameters, and use it to assess potential improvements to the method.
We present absolute frequency measurements of a laser stabilized using an offset sideband locking technique on the P(49)24-1 rovibrational transition of 127 I 2 near 556 nm. The P(49)24-1 transition is offset by 4.8 GHz from the intercombination transition of 171 Yb. A dual-tone electro-optical modulator is employed to bridge this frequency gap, enabling frequency stabilization of the 556 nm laser near the Yb transition, achieving a fractional frequency stability of 1.2 × 10 −11 at one second. We thoroughly characterize the frequency shifts associated with this locking scheme, with typical systematic effects fractional uncertainties of 9 × 10 −12 .