Includes the establishment of the spontaneous radiation of vertical cavity semiconductor optical amplifier (VCSOA) bistable model, numerical analysis and comparison of VCSOA and traditional SOA bistable characteristics of amplified spontaneous emission (ASE) sensitivity.
The characteristics of optical bistability in a vertical-cavity semiconductor optical amplifier (VCSOA) operated in reflection are reported. The dependences of the optical bistability in VCSOAs on the initial phase detuning and on the applied bias current are analyzed. The optical bistability is also studied for different numbers of superimposed periods in the top distributed bragg reflector (DBR) that conform the internal cavity of the device. The appearance of the X-bistable and the clockwise bistable loops is predicted theoretically in a VCSOA operated in reflection for the first time, to the best of our knowledge. Moreover, it is also predicted that the control of the VCSOA's top reflectivity by the addition of new superimposed periods in its top DBR reduces by one order of magnitude the input power needed for the assessment of the X- and the clockwise bistable loop, compared to that required in in-plane semiconductor optical amplifiers. These results, added to the ease of fabricating two-dimensional arrays of this kind of device could be useful for the development of new optical logic or optical signal regeneration devices.
We present an overview of the properties and applications of optical bistability in vertical-cavity semiconductor optical amplifiers (VCSOAs). The basic physics and analytical models of this optical nonlinearity are discussed. Experimental results obtained from a VCSOA operated in the 850 nm wavelength region are presented. Counterclockwise hysteresis loops are obtained over a range of initial phase detuning and bias currents. One hysteresis loop is observed experimentally with an input power as low as 2 muW when the device is biased at 98% of its lasing threshold. Numerical simulations based on the Fabry-Perot resonator model and rate equations we developed show good agreement with our experimental observations. In addition, a low input intensity high contrast (10:1) optical and gate and 2R regeneration are demonstrated. We believe that bistable VCSOAs can significantly advance the prospect of a dense two-dimensional array of low-switching-intensity all-optical logic and memory elements.
We report, the first time to our knowledge, an observation of optical bistability in a Vertical-Cavity Semiconductor Optical Amplifier (VCSOA) operated in reflection mode. Counterclockwise hysteresis loops are obtained over a range of initial phase detuning and bias currents. One hysteresis loop is observed experimentally with an input power as low as 2 ìW when the device is biased at 98% of its lasing threshold. We also numerically simulate the optical bistability and obtain good agreement with our experimental observations. Bistable VCSOAs significantly advances the prospect of dense 2-D array of low switching-intensity all-optical logic and memory elements.