We describe a laboratory demonstration of a quantum error correction procedure that can correct intrinsic measurement errors in linear-optics quantum gates. The procedure involved a photonic two-qubit encoding and fast feed-forward-controlled single-qubit operations.
We describe a laboratory demonstration of a quantum error correction procedure that can correct intrinsic measurement errors in linear-optics quantum gates. The procedure involves a two-qubit encoding and fast feed-forward-controlled single-qubit operations. In our demonstration the qubits were represented by the polarization states of two single-photons from a parametric down-conversion source, and the real-time feed-forward control was implemented using an electro-optic device triggered by the output of single-photon detectors.
Probabilistic quantum logic operations can be performed using linear optical elements and post-selection based on the results of measurements on ancilla photons. We review the results of a number of recent experiments in this area, including the demonstration of several quantum logic gates, the use of feed-forward control, a new source of single photons, and a quantum memory device for single photons. A high-fidelity approach in which the logic gates always produce an output will also be discussed.
We demonstrate a quantum error correction scheme that protects against accidental measurement, using a parity encoding where the logical state of a single qubit is encoded into two physical qubits using a nondeterministic photonic controlled-NOT gate. For the single qubit input states $\ensuremath{\mid}0⟩$, $\ensuremath{\mid}1⟩$, $\ensuremath{\mid}0⟩\ifmmode\pm\else\textpm\fi{}\ensuremath{\mid}1⟩$, and $\ensuremath{\mid}0⟩\ifmmode\pm\else\textpm\fi{}i\ensuremath{\mid}1⟩$ our encoder produces the appropriate two-qubit encoded state with an average fidelity of $0.88\ifmmode\pm\else\textpm\fi{}0.03$ and the single qubit decoded states have an average fidelity of $0.93\ifmmode\pm\else\textpm\fi{}0.05$ with the original state. We are able to decode the two-qubit state (up to a bit flip) by performing a measurement on one of the qubits in the logical basis; we find that the 64 one-qubit decoded states arising from 16 real and imaginary single-qubit superposition inputs have an average fidelity of $0.96\ifmmode\pm\else\textpm\fi{}0.03$.
One of the main problems that optical quantum computing has to overcome is the efficient construction of two-photon gates. Theoretically these gates can be realized using Kerr-nonlinearities, but the techniques involved are experimentally very difficult. We therefore employ linear optics with projective measurements to generate these non-linearities. The downside is that the measurement-induced nonlinearities achieved with linear optics are less versatile and the success rate can be quite low. This project is mainly the result of a literature study but also a theoretical work on the physics behind quantum optical multiports which is essential for realizing two-photon gates. By applying different postcorrection techniques we increase the probability of success in a modifed non-linear sign shift gate which is foundational for the two photon controlled-NOT gate. We prove that it's not possible to correct the states by only using a single beam splitter. We show that it might be possible to increase the probability of success using a more complex setup with at least two error-correcting beam splitters.