One of our major target is quantum key distribution (QKD,) which is closest to the practical use. Though QKD can be performed only with current technology, there still remain many thing to be improved. One of the most important devices that determine the system performance is photon detectors. It limits the transmission distance in optical fiber communication wavelength. A photon detector combining the two avalanche photon diodes (APD) has been demonstrated for qubit discrimination in 1550 nm. Spikes accompanied with the signals in gated-mode were canceled by balanced output from the two APDs. The balanced APD photon detector shows very low dark count rate (2x10-7) counts/pulse) with 10 % detection efficiency. We have also developed a highly stable interferometer on a planer-lightwave-circuit (PLC.) We have achieved single-photon interference over 150 km using time-division interferometers for quantum cryptography, which were composed of the two integrated-optic asymmetric Mach-Zehnder interferometers, and the balanced gated-mode photon detectors. The observed visibility was more than 80 % after 150-km transmission, which refers to a quantum bit error rate of less than 10 %. We will also describe temperature insensible QKD system and high speed (100 bps) key transmission over 40 km fiber.
One of our major target is quantum key distribution (QKD,) which is closest to the practical use. Though QKD can be performed only with current technology, there still remain many thing to be improved. One of the most important devices that determine the system performance is photon detectors. It limits the transmission distance in optical fiber communication wavelength. A photon detector combining the two avalanche photon diodes (APD) has been demonstrated for qubit discrimination in 1550 nm. Spikes accompanied with the signals in gated-mode were canceled by balanced output from the two APDs. The balanced APD photon detector shows very low dark count rate (2x10-7) counts/pulse) with 10 % detection efficiency. We have also developed a highly stable interferometer on a planer-lightwave-circuit (PLC.) We have achieved single-photon interference over 150 km using time-division interferometers for quantum cryptography, which were composed of the two integrated-optic asymmetric Mach-Zehnder interferometers, and the balanced gated-mode photon detectors. The observed visibility was more than 80 % after 150-km transmission, which refers to a quantum bit error rate of less than 10 %. We will also describe temperature insensible QKD system and high speed (100 bps) key transmission over 40 km fiber.
Quantum Key Distribution (QKD) systems based on single photon transmission can generate unconditionally secure common key between remote users. Improvement of QKD performance, particularly on key generation rate, has been required to meet current network traffic. High key generation rate is realized by increasing photon detection rate and by reducing error rate. Therefore, a high-speed QKD system should be equipped with low loss receivers with high visibility, highly efficient photon detectors with small dark count probability, and a stable clock synchronization system with low stray light to the quantum signals. A solution for these issues are given by employing planar lightwave circuit interferometers, single photon detection circuits and modules, and clock synchronization based on Wavelength Division Multiplexing (WDM) technique.
Two approaches to single-photon detection at telecom wavelengths have been investigated, using semiconductor and superconductor technologies. The low temperature operation of free-running InGaAs/InP negative feedback avalanche diodes (NFADs) was studied, demonstrating that they can operate with an extremely low dark count rate, which opens up a host of new applications. Secondly, superconducting nanowire single-photon detectors (SNSPDs) based on amorphous materials were developed, fabricated and characterized. These detectors are highly attractive because they can achieve excellent attributes simultaneously, such as high efficiency, low noise, good temporal resolution, no afterpulsing and high count rates. Finally, it was demonstrated that the use of NFADs can enable record distance quantum key distribution (QKD) over 307 km of optical fiber. A next generation QKD system has been proposed and numerically analyzed, aiming at extending the record distance by an additional 100 km and increasing the state-of-the-art secret key rate by over an order of magnitude.
Quantum key distribution (QKD) systems can generate unconditionally secure common keys between remote users. Improvements of QKD performance, particularly in key generation rate, have been required to meet current network traffic. A high-speed QKD system should be equipped with low-loss receivers with high visibility, highly efficient photon detectors with small dark count probability. A solution to these issues is to employ planar lightwave circuit (PLC) interferometers, single photon detection circuits and modules, together with multi-wavelength channels transmission using wavelength division multiplexing (WDM) technique.
In our experiment, two InGaAs/InP avalanche photodiodes (APD) were used in the quantum key distribution (QKD) system for single-photon detection at telecom communication wavelength (1310/1550 nm). By using properly designed passive-quenching circuit, the photo-detection efficiency of the APD could reach 10% at 1550 nm. In order to decrease the dark count rate efficiently, we designed a coincident counting circuits for single-photon detection. Before the APD signals were sent to the signal processing circuit, the avalanche signals were amplified and shaped into the TTL pulses. In order to obtain an accurate and efficient data acquisition and to transfer synchronically several signals such as the TTL signals and pulses from Random generators, we designed a signal processing circuit with the parallel port whose speed limitation is about 100Kb/s. In our experiments of single-photon interference and quantum cryptography, the electronic designs presented us satisfactory performance and results. To achieve much higher speed for the data acquisition, we also employed the Universal Serial Bus System (USB2.0) to interface our single-photon avalanche detectors and random generators used in our QKD system, which was believed to improve the performance of QKD such as the key distribution speed.
In any quantum communication system, such as a quantum key distribution (QKD) system, data rates are mainly limited by the system clock rate and the various link losses. While the transmission clock rate is limited by the temporal resolution of the single-photon detectors, losses in a fiber-based quantum communication system can be minimized by operating in the near infrared range (NIR), at 1310 nm or 1550 nm. Commercially available InGaAs-based avalanche photo-diodes (APDs) can be operated as single-photon detectors in this wavelength range [Hadfield, 2009]. Due to the severe after-pulsing, InGaAs APDs are typically used in a gated mode and this can limit their application in high-speed quantum communications systems. Superconducting single-photon detectors (SSPDs) can work in the NIR wavelength range with good performance [Gol’tsman et al. 2001; Hadfield, 2009]. However, SSPDs require cryogenic temperatures, and are not widely available on the commercial market at present. In addition, InGaAs/InP based photomultiplier tubes (PMT) can operate in the NIR range, but its performance is limited by very low detection efficiency (1 % at 1600 nm) and large timing jitter (1.5 ns) [Hamamatsu, 2005]. Microchannel plates (MCP) are micro-capillary electron multipliers coated with an electron-emissive material and multiply photon-excited electrons from a photon cathode [Wiza, 1979]. MCPs usually have faster rise times and lower timing jitter than is achievable with PMTs. InGaAs MCPs can work in the NIR range. These MCPs, but are limited by low detection efficiency (~1 %) [Martin, J. & Hink P. 2003]. On the other hand, silicon based avalanche photo-diodes (Si APDs) are compact, relatively inexpensive, and can be operated at ambient temperatures with high detection efficiency and low noise in the visible or near-visible range. Unfortunately they do not work at wavelengths longer than 1000 nm. For those wavelengths, an up-conversion technique has been developed that uses sum-frequency generation (SFG) in a non-linear optical medium to convert the signal photons to a higher frequency (shorter wavelength) in the visible or near visible range. The up-converted photons can then be detected by a Si APD. Up-conversion detectors use commercially available components and devices, and are a practical solution for many applications in quantum communications. To date, several groups have successfully developed highly efficient up-conversion single-photon detectors in the nearinfrared range using periodically poled lithium niobate (PPLN) waveguides [Diamanti et al., 2005; Langrock et al., 2005; Thew et al., 2006; Tanzilli et al., 2005; Xu et al., 2007;] and bulk crystals [Vandevender & Kwiat, 2004].