Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review

Electro-Optical Modification of Light Waves

L. H. Stauffer

Published Oct 15, 1930• 2 citations
Publisher

Abstract

Broadening of the satellites of the Hg green line $\ensuremath{\lambda}5461$ was observed when the light passed between the plates of a Kerr cell on which was impressed a varying E.M.F. having a frequency of 2\ifmmode\times\else\texttimes\fi{}${10}^{7}$ ${\mathrm{sec}}^{\ensuremath{-}1}$. The E.M.F. was obtained by superposing the output of a vacuum tube oscillator upon a steady potential of about 7000 volts. The maximum oscillator voltage was about 5000 volts. With this voltage the fine structure of the Hg green line became so diffuse that two satellites having a separation of 0.045A were scarcely resolved by the Lummer-plate. The broadening was observed to increase rapidly with the oscillator voltage. The observed effect is predicted by the classical electromagnetic theory and the quantum theories of dispersion of Kramers-Heisenburg, Schr\"odinger, and Dirac. The high frequency voltage effects a rapid variation of the refractive index of the nitrobenzene in the Kerr cell which in turn produces a corresponding variation in optical path, giving the source a virtual velocity, and thereby producing a Doppler effect. The magnitude of the observed boradening is in agreement with the predictions of theory.

DOI
10.1103/physrev.36.1352

Related papers

Vacuum ultraviolet oscillator strengths of Hg measured by sum-frequency mixing

Arlee V. Smith, W. J. Alford

We have measured oscillator strengths for the transitions 6 $^{1}S$ to (5${d}^{10}$6s np) n $^{1}$,3${\mathrm{P}}_{1}$ for n=6 to 13 and to (5${d}^{9}$6${s}^{2}$6p) 6p' $^{1}P$ for atomic Hg. Two new techniques for measuring dispersion based on nonlinear-optical sum-frequency mixing are used to achieve 10% accuracy for the stronger transitions. One method uses crossed beams in a Hg heat-pipe cell to map dispersion curves in regions of anomalous dispersion. The second method uses input beams of three separate frequencies and maps regions of normal and anomalous dispersion by tuning one of the input frequencies to the red and blue of the 6 $^{3}P_{1}$ level. Because the dispersion of the refractive index near a resonance is determined over a large wavelength range, the oscillator strength of that resonance is determined independent of the strengths of other transitions.

Physical Review A•May 1, 1986•18 citations

Slow Light in a Collection of Collisionally Broadened Two-Level Atoms

R. W. Bovd, Nikolay N. Lepeshkin, Petros Zerom

The two-level atom can, for good reason, be considered the basic material structure for the study of quantum optics [1]. The two-level atom has played a fundamental role in studies of physical processes, including self-induced transparency (SIT), photon echoes, optical nutation, saturation spectroscopy, and, most recently, slow- and fast-light research. This latter field has recently been the subject of great activity, as researchers have learned how to utilize various physical processes to exert control over the velocity of propagation of light pulses through material systems [2]. This interest stems both from the intellectual intrigue in situations in which the velocity of light can be speeded up or slowed down by many orders of magnitude and the promise that such techniques might be useful for applications in fields such as telecommunications and optical computing [3‐6]. Most of the recent work in this field has made use of the process of electromagnetically induced transparency (EIT) to induce a narrow transparency region in an otherwise highly absorbing optical material [7, 8]. The rapid variation of the refractive index n associated with this transparency window then leads to a strong modification of the group velocity n g in accordance with the standard relation

Laser Physics•Jan 1, 2005•4 citations

Dispersive properties of electromagnetically induced transparency

Stephen E. Harris, J. E. Field, A. Kasapi

An atomic transition that has been made transparent by applying an additional electromagnetic field exhibits a rapidly varying refractive index with zero group velocity dispersion at line center. A 10-cm-long Pb vapor cell at an atom density of 7\ifmmode\times\else\texttimes\fi{}${10}^{15}$ atoms/${\mathrm{cm}}^{3}$ and probed on its 283-nm resonance transition has a calculated optical delay of 83 ns [(c/${\mathit{V}}_{\mathit{G}}$)=250].

Physical Review A•Jul 1, 1992•512 citations

Slow Light in Optical Fibers

Shanglin Hou, Wei Qiu

The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.

InTech eBooks•Jan 25, 2012•0 citations

Kerr dispersion of atomic sodium and lithium

Martin P. Bogaard, A. David Buckingham, Brian J. Orr

A detailed theory of the frequency dependence of the electro-optical Kerr effect of an atom in the region of absorption lines is presented and applied to the particular case of 2 P←2 S doublets of sodium and lithium vapours. Doppler broadening is taken into account. With electric dipole matrix elements derived from the Coulomb approximation for both discrete and continuum states, the molar Kerr constant, m K(32 P←32 S), of atomic sodium vapour in the D-line absorption region is calculated to ±30 per cent; the calculations indicate that m K in the vicinity of the D2 line (32 P 3/2←32 S 1/2) should be very much greater than near the D1 line (32 P 1/2←32 S 1/2) in qualitative agreement with the experiments of Kopfermann and Ladenburg Qualitative consideration is also given to dispersion of magnetic birefringence; in contrast with electric birefringence strong dispersion is expected near both lines of alkali metal 2 P←2 S doublets.

Molecular Physics•Jan 1, 1967•24 citations

OPTICAL EXTENSION OF DICKE'S SUPERRADIANCE: A CASE STUDY OF THALLIUM IN THALLIUM MERCURY SYSTEM

Shubhada Adhi

A detailed study of superradiance at the Thallium green line (λ=535.0 nm ) in Thallium–Mercury (Tl–Hg) system is reported. High peak power of 1 kW delivered in short pulse duration of 4 nsec (FWHM) has been obtained. Attempts have also been made experimentally to determine the various time constants viz. inhomogeneous dephasing time, decay time, characteristic time, delay time etc. along with their inequality relations for the Tl–Hg system. The experimental results of superradiance in Tl are compared with those predicted theoretically by M. S. Feld et al.2

Modern Physics Letters B•Apr 30, 2001•0 citations
Broadening of the satellites of the Hg green line \ensuremathλ5461\ensuremath{\lambda}5461\ensuremathλ5461 was observed when the light passed between the plates of a Kerr cell on which was impressed a varying E.M.F. having a frequency of 2\ifmmode\times\else\texttimes\fi{}107{10}^{7}107 sec\ensuremath−1{\mathrm{sec}}^{\ensuremath{-}1}sec\ensuremath−1. The E.M.F. was obtained by superposing the output of a vacuum tube oscillator upon a steady potential of about 7000 volts. The maximum oscillator voltage was about 5000 volts. With this voltage the fine structure of the Hg green line became so diffuse that two satellites having a separation of 0.045A were scarcely resolved by the Lummer-plate. The broadening was observed to increase rapidly with the oscillator voltage. The observed effect is predicted by the classical electromagnetic theory and the quantum theories of dispersion of Kramers-Heisenburg, Schr"odinger, and Dirac. The high frequency voltage effects a rapid variation of the refractive index of the nitrobenzene in the Kerr cell which in turn produces a corresponding variation in optical path, giving the source a virtual velocity, and thereby producing a Doppler effect. The magnitude of the observed boradening is in agreement with the predictions of theory.
We have measured oscillator strengths for the transitions 6 1S^{1}S1S to (5${d}^{10}$6s np) n 1^{1}1,3P1{\mathrm{P}}_{1}P1​ for n=6 to 13 and to (5${d}^{9}666{s}^{2}$6p) 6p' 1P^{1}P1P for atomic Hg. Two new techniques for measuring dispersion based on nonlinear-optical sum-frequency mixing are used to achieve 10% accuracy for the stronger transitions. One method uses crossed beams in a Hg heat-pipe cell to map dispersion curves in regions of anomalous dispersion. The second method uses input beams of three separate frequencies and maps regions of normal and anomalous dispersion by tuning one of the input frequencies to the red and blue of the 6 3P1^{3}P_{1}3P1​ level. Because the dispersion of the refractive index near a resonance is determined over a large wavelength range, the oscillator strength of that resonance is determined independent of the strengths of other transitions.
The two-level atom can, for good reason, be considered the basic material structure for the study of quantum optics [1]. The two-level atom has played a fundamental role in studies of physical processes, including self-induced transparency (SIT), photon echoes, optical nutation, saturation spectroscopy, and, most recently, slow- and fast-light research. This latter field has recently been the subject of great activity, as researchers have learned how to utilize various physical processes to exert control over the velocity of propagation of light pulses through material systems [2]. This interest stems both from the intellectual intrigue in situations in which the velocity of light can be speeded up or slowed down by many orders of magnitude and the promise that such techniques might be useful for applications in fields such as telecommunications and optical computing [3‐6]. Most of the recent work in this field has made use of the process of electromagnetically induced transparency (EIT) to induce a narrow transparency region in an otherwise highly absorbing optical material [7, 8]. The rapid variation of the refractive index n associated with this transparency window then leads to a strong modification of the group velocity n g in accordance with the standard relation
An atomic transition that has been made transparent by applying an additional electromagnetic field exhibits a rapidly varying refractive index with zero group velocity dispersion at line center. A 10-cm-long Pb vapor cell at an atom density of 7\ifmmode\times\else\texttimes\fi{}1015{10}^{15}1015 atoms/cm3{\mathrm{cm}}^{3}cm3 and probed on its 283-nm resonance transition has a calculated optical delay of 83 ns [(c/VG{\mathit{V}}_{\mathit{G}}VG​)=250].
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.
A detailed theory of the frequency dependence of the electro-optical Kerr effect of an atom in the region of absorption lines is presented and applied to the particular case of 2 P←2 S doublets of sodium and lithium vapours. Doppler broadening is taken into account. With electric dipole matrix elements derived from the Coulomb approximation for both discrete and continuum states, the molar Kerr constant, m K(32 P←32 S), of atomic sodium vapour in the D-line absorption region is calculated to ±30 per cent; the calculations indicate that m K in the vicinity of the D2 line (32 P 3/2←32 S 1/2) should be very much greater than near the D1 line (32 P 1/2←32 S 1/2) in qualitative agreement with the experiments of Kopfermann and Ladenburg Qualitative consideration is also given to dispersion of magnetic birefringence; in contrast with electric birefringence strong dispersion is expected near both lines of alkali metal 2 P←2 S doublets.
A detailed study of superradiance at the Thallium green line (λ=535.0 nm ) in Thallium–Mercury (Tl–Hg) system is reported. High peak power of 1 kW delivered in short pulse duration of 4 nsec (FWHM) has been obtained. Attempts have also been made experimentally to determine the various time constants viz. inhomogeneous dephasing time, decay time, characteristic time, delay time etc. along with their inequality relations for the Tl–Hg system. The experimental results of superradiance in Tl are compared with those predicted theoretically by M. S. Feld et al.2