Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Study of Raman-Ramsey fringes for enhanced precision in a chip scale Rb clock

G. S. Pati, K. Salit, M. S. Shahriar

Published Feb 7, 2008• 1 citation
Publisher

Abstract

We report observation of high contrast Raman-Ramsey fringes using time delayed optical pulse pairs in a rubidium vapor cell. The width of these fringes are not limited by saturation and provides a simpler means to produce narrow atomic linewidths using a thermal vapor medium for compact atomic clock applications. We also demonstrate phasescanned Raman-Ramsey fringes, with potential application to sensitive detection of trace vapors.

DOI
10.1117/12.772332

Related papers

Observation of Raman Ramsey Fringes using Delayed Optical Pulses in Atomic vapor Medium

G. S. Pati, K. Salit, M. S. Shahriar

We report observation of high contrast Raman Ramsey fringes in atomic vapor medium using time delayed optical pulse pairs. The width of these fringes are not limited by saturation and can be used to produce narrow resonance for clock applications.

Frontiers in Optics•Jan 1, 2007•0 citations

Prospect for development of a pulsed CPT Raman Ramsey clock using atomic vapor

G. S. Pati, Fredrik K. Fatemi, Mark Bashkansky +1 more

The phenomenon of all-optical Ramsey interference using pulsed coherent population trapping (CPT) beams provides a new avenue for developing frequency standards using atomic vapor. In this study, we show that frequency narrowed Ramsey fringes can be produced in rubidium vapor without the effect of power broadening. We observed fringes of width as narrow as 1 kHz using a buffer-gas filled rubidium cell. A compact injection-locked laser (ILL) system was used to generate CPT beams. Studies also show that ac Stark effect on Ramsey fringes can be reduced, and higher frequency stability can be achieved in a clock application. The results are encouraging to propose an architecture for development of a pulsed CPT Ramsey clock. In this paper, we also provide related discussions on clock frequency stability, and our plans for future experiments.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 11, 2010•2 citations

Raman-Ramsey resonances in atomic vapor cells: Rabi pulling and optical-density effects

Salvatore Micalizio, Aldo Godone

Raman-Ramsey interference has proved a very effective technique to implement compact and high performing vapor cell frequency standards. In this paper, we theoretically characterize Raman-Ramsey resonances in an optically thick atomic vapor. Specifically, some parameters of interest for frequency standards applications, like contrast and linewidth of the central Raman-Ramsey fringe, are evaluated at different temperatures for $^{133}\mathrm{Cs}$ and $^{87}\mathrm{Rb}$ vapor cells with buffer gas. Density narrowing and broadening effects are described and explained in terms of a three-level theory where laser field propagation through the atomic medium is taken into account. Also, we investigate light shift both in low and high atomic density regimes. Light shift, which potentially degrades the medium- to long-term stability of Raman-Ramsey clocks, is composed of two contributions. The first is a pulling effect exerted by the wide Rabi profile enclosing the interference pattern on the central Raman-Ramsey fringe. The second light-shift term is strictly related to the detection time. Calculations derived from our model well describe already existing experimental results and new behaviors are predicted.

Physical Review A•Apr 26, 2019•14 citations

Ramsey Spectroscopy in a Micro-Fabricated Rb Vapor Cell for Miniature Atomic Clocks

Etienne Batori, C. Affolderbach, Matthieu Pellaton +5 more

We present a prospective experimental study on double-resonance Ramsey spectroscopy in a micro fabricated Rb vapor cell, in view of future miniature atomic clocks with improved stability performance. Ramsey signals with a narrow central fringe width of 1.5 kHz combined with a competitive contrast of > 5 % are observed, resulting in a clock short-term stability of ≈ 1×10-11τ−1/2. The employed pulsed optical pumping (POP) scheme bears promise for reduced light-shift effects and thus for improved clock stability on medium- to long-term timescales.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 7, 2021•1 citation

Optical Ramsey interference and its performance in D1 line excitation in rubidium vapor for implementation of a vapor cell clock

G. S. Pati, Fredrik K. Fatemi, Mark Bashkansky +1 more

Pulsed coherent population trapping in atomic vapor provides a convenient method for generating frequency narrowed atomic resonance using Ramsey interference. Here, we present our experimental results showing high-contrast and sub-kilohertz Ramsey interference fringes produced by coherently prepared 85Rb atoms using Raman excitation formed in D1 line transitions. A test system for atomic clock has been constructed to measure light shift for both continuous and pulsed Raman excitation cases. Our measurements show that light shift measured using pulsed Raman excitation, is reduced compared to the continuous excitation case. Our ability to measure light shift is currently limited by the resolution of the frequency counter, and performance of the locking electronics used.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 10, 2011•6 citations

A high-performance Raman-Ramsey Cs vapor cell atomic clock

Moustafa Abdel Hafiz, Grégoire Coget, Peter Yun +3 more

We demonstrate a high-performance coherent-population-trapping (CPT) Cs vapor cell atomic clock using the push-pull optical pumping technique in the pulsed regime, allowing the detection of high-contrast and narrow Ramsey-CPT fringes. The impact of several experimental parameters onto the clock resonance and short-term fractional frequency stability, including the laser power, the cell temperature, and the Ramsey sequence parameters, has been investigated. We observe and explain the existence of a slight dependence on laser power of the central Ramsey-CPT fringe line-width in the pulsed regime. We report also that the central fringe line-width is commonly narrower than the expected Ramsey line-width given by 1/(2TR), with TR the free-evolution time, for short values of TR. The clock demonstrates a short-term fractional frequency stability at the level of 2.3×10−13 τ−1/2 up to 100 s averaging time, mainly limited by the laser amplitude modulation noise. Comparable performances are obtained in the conventional continuous wave regime, with the use of an additional laser power stabilization setup. The pulsed interaction allows to reduce significantly the clock frequency sensitivity to laser power variations, especially for high values of TR. This pulsed CPT clock, ranking among the best microwave vapor cell atomic frequency standards, could find applications in telecommunication, instrumentation, defense or satellite-based navigation systems.

arXiv:1703.04720•Journal of Applied Physics•Mar 10, 2017•89 citations
We report observation of high contrast Raman-Ramsey fringes using time delayed optical pulse pairs in a rubidium vapor cell. The width of these fringes are not limited by saturation and provides a simpler means to produce narrow atomic linewidths using a thermal vapor medium for compact atomic clock applications. We also demonstrate phasescanned Raman-Ramsey fringes, with potential application to sensitive detection of trace vapors.
The phenomenon of all-optical Ramsey interference using pulsed coherent population trapping (CPT) beams provides a new avenue for developing frequency standards using atomic vapor. In this study, we show that frequency narrowed Ramsey fringes can be produced in rubidium vapor without the effect of power broadening. We observed fringes of width as narrow as 1 kHz using a buffer-gas filled rubidium cell. A compact injection-locked laser (ILL) system was used to generate CPT beams. Studies also show that ac Stark effect on Ramsey fringes can be reduced, and higher frequency stability can be achieved in a clock application. The results are encouraging to propose an architecture for development of a pulsed CPT Ramsey clock. In this paper, we also provide related discussions on clock frequency stability, and our plans for future experiments.
Raman-Ramsey interference has proved a very effective technique to implement compact and high performing vapor cell frequency standards. In this paper, we theoretically characterize Raman-Ramsey resonances in an optically thick atomic vapor. Specifically, some parameters of interest for frequency standards applications, like contrast and linewidth of the central Raman-Ramsey fringe, are evaluated at different temperatures for 133Cs^{133}\mathrm{Cs}133Cs and 87Rb^{87}\mathrm{Rb}87Rb vapor cells with buffer gas. Density narrowing and broadening effects are described and explained in terms of a three-level theory where laser field propagation through the atomic medium is taken into account. Also, we investigate light shift both in low and high atomic density regimes. Light shift, which potentially degrades the medium- to long-term stability of Raman-Ramsey clocks, is composed of two contributions. The first is a pulling effect exerted by the wide Rabi profile enclosing the interference pattern on the central Raman-Ramsey fringe. The second light-shift term is strictly related to the detection time. Calculations derived from our model well describe already existing experimental results and new behaviors are predicted.
We present a prospective experimental study on double-resonance Ramsey spectroscopy in a micro fabricated Rb vapor cell, in view of future miniature atomic clocks with improved stability performance. Ramsey signals with a narrow central fringe width of 1.5 kHz combined with a competitive contrast of > 5 % are observed, resulting in a clock short-term stability of ≈ 1×10-11τ−1/2. The employed pulsed optical pumping (POP) scheme bears promise for reduced light-shift effects and thus for improved clock stability on medium- to long-term timescales.
Pulsed coherent population trapping in atomic vapor provides a convenient method for generating frequency narrowed atomic resonance using Ramsey interference. Here, we present our experimental results showing high-contrast and sub-kilohertz Ramsey interference fringes produced by coherently prepared 85Rb atoms using Raman excitation formed in D1 line transitions. A test system for atomic clock has been constructed to measure light shift for both continuous and pulsed Raman excitation cases. Our measurements show that light shift measured using pulsed Raman excitation, is reduced compared to the continuous excitation case. Our ability to measure light shift is currently limited by the resolution of the frequency counter, and performance of the locking electronics used.
We demonstrate a high-performance coherent-population-trapping (CPT) Cs vapor cell atomic clock using the push-pull optical pumping technique in the pulsed regime, allowing the detection of high-contrast and narrow Ramsey-CPT fringes. The impact of several experimental parameters onto the clock resonance and short-term fractional frequency stability, including the laser power, the cell temperature, and the Ramsey sequence parameters, has been investigated. We observe and explain the existence of a slight dependence on laser power of the central Ramsey-CPT fringe line-width in the pulsed regime. We report also that the central fringe line-width is commonly narrower than the expected Ramsey line-width given by 1/(2TR), with TR the free-evolution time, for short values of TR. The clock demonstrates a short-term fractional frequency stability at the level of 2.3×10−13 τ−1/2 up to 100 s averaging time, mainly limited by the laser amplitude modulation noise. Comparable performances are obtained in the conventional continuous wave regime, with the use of an additional laser power stabilization setup. The pulsed interaction allows to reduce significantly the clock frequency sensitivity to laser power variations, especially for high values of TR. This pulsed CPT clock, ranking among the best microwave vapor cell atomic frequency standards, could find applications in telecommunication, instrumentation, defense or satellite-based navigation systems.