Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Optical characterization and crystal field calculations for some erbium based solid state materials for laser refrigeration

Z. Hasan, Zhengle Qiu, Jackie Johnson, Uwe Homerick

Published Feb 12, 2009• 1 citation
Publisher

Abstract

The potential of three erbium based solids hosts has been investigated for laser cooling. Absorption and emission spectra have been studied for the low lying IR transitions of erbium that are relevant to recent reports of cooling using the 4I15/2-4I9/2 and4I15/2 -4I13/2 transitions. Experimental studies have been performed for erbium in three hosts; ZBLAN glass and KPb2Cl5 and Cs2NaYCl6 crystals. In order to estimate the efficiencies of cooling, theoretical calculations have been performed for the cubic Elpasolite (Cs2NaYCl6 ) crystal. These calculations also provide a first principle insight into the cooling efficiency for non-cubic and glassy hosts where such calculations are not possible.

DOI
10.1117/12.815248

Related papers

Laser cooling in materials with high concentration of erbium

Zameer U. Hasan, Zhengle Qiu, Jonathan William Lynch

Laser cooling of solids has many potential applications in communications, surveillance and medical science, etc. This paper reviews our recent work on laser refrigeration of solids in stoichiometric hexa-chloroelpasolite crystals with high concentrations of erbium. Our results are one to two orders of magnitude improvements over any previously reported cooling in erbium based materials. We have seen bulk crystal cooling by as low as 6 degrees Celsius below room temperature in elpasolite crystals. The high efficiency and low temperatures of cooling have been attributed to a high concentration of erbium, as high as 80% by formula, in the crystal. This cooling has been achieved by pumping near the IR transition at 870 nm which is the weakest transition of erbium. We report cooling in the 1.5 micron transition as well, using a diode laser to pump this transition. The result is cooling by only a fraction of a degree from room temperature.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 9, 2011•1 citation

Optical cooling in Er^3+:KPb_2Cl_5

Nicholas J. Condon, Steven R. Bowman, Shawn P. O'Connor +2 more

For the first time, optical cooling has been observed in the (4)I(13/2) excited state of erbium(III), using the low phonon energy host materal, potassium lead chloride (KPb(2)Cl(2)). Cooling was observed when samples were pumped at wavelengths longer than 1557 nm, 17 nm longer than the mean fluorescence wavelength of 1540 nm, which implies a nonradiative heat load of 1.1% for the (4)I(13/2)-->(4)I(15/2) transition. When pumped at 1568 nm, the total cooling efficiency was 0.38% of the absorbed power. These results highlight the potential of Er(3+):KPb(2)Cl(5) as a material for lasers operating in an eye safe spectral region.

Optics Express•Mar 23, 2009•47 citations

Review of condensed matter laser cooling using electric-dipole-allowed transitions

Markus P. Hehlen

The cooling of solids via laser-excited anti-Stokes luminescence has reached the cryogenic regime and is now being considered for several applications that benefit from vibration-free cryogenic refrigeration. 4f-4f transitions in rare-earth-doped crystals with low phonon energies currently offer the best laser-cooling performance. These transitions, however, are electric-dipole (ED) forbidden and thus have low cross sections, limiting the minimum achievable temperatures in practical materials to the 50–100 K regime. In contrast, ED-allowed transitions may offer greater cross sections and potentially enable lower minimum temperatures or more compact devices. The search for laser cooling with ED-allowed transitions has been an active field of research over the past decades with a wide variety of materials having been studied. This paper reviews the fundamentals of solid-state laser cooling, provides a preliminary theoretical assessment showing that laser-cooling with ED-allowed transitions is in principle possible, and reviews the experimental results reported to date. While cooling with ED-allowed transitions has not yet been realized in the solid state, the existing experimental body of work along with the theoretical considerations presented here suggest that further research on this topic may be fruitful.

Journal of Luminescence•Sep 6, 2022•7 citations

Recent advances in laser cooling of solids

Galina A. Nemova, Raman Kashyap

The recent achievements devoted to cooling of solids with a laser are presented in this paper. We discuss the latest results of traditional laser cooling of solids based on rare earth ions and new techniques based on colloidal lead-salt quantum dots doped in a glass host, laser cooling in Tm3+-doped oxy-fluoride glass ceramic. Relatively short (microsecond) lifetime of the excited level of the PbSe QDs compared to the millisecond lifetime of the excited level of RE ions allows an acceleration of the cooling process and provides an opportunity to use new materials with higher phonon energy as hosts, which are normally considered unsuitable for cooling with RE ions. Another new approach to the laser cooling problem based on super-radiance has been considered in this paper. The advantages of optical refrigeration with rare earth doped semiconductors, in which not only optically active electrons of the 4f shell but the valence and conduction bands of the host material are involved in cooling cycle is discussed. It is shown that involving the valence and conduction bands of the host in the cooling cycle allows the pump wavelength to be shorter than mean fluorescence wavelength. Raman laser cooling of solids as well as observation of spontaneous Brillouin cooling have been presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 11, 2013•3 citations

Material metrics for laser cooling of solids

Jedo Kim, Ankur Kapoor, Massoud Kaviany

The material metrics for optimal laser cooling of ion-doped solids are derived using atomic and molecular dynamics properties of the constituents. The anti-Stokes process is modeled as an optical phonon coupling of the bound electron, followed by a photon absorption. The transition dipole moment is estimated using a simplified charge-displacement model and the Judd--Ofelt theory of rare-earth ions both suggesting that transitions with high-energy gaps and similar angular momentum states should be used. The electron-phonon coupling is interpreted as a derivative of electronic energy with respect to displacement of the nearest neighboring ligands whose stretching mode frequency is approximated using the molecular data. The Debye-Gaussian model is used for the phonon density of states of diatomic crystal. Then, the Fermi golden rule is used for photon-induced, phonon-assisted electronic transition probability and applied to the cooling rate equation by defining a phonon-assisted transition dipole moment. Based on the material metrics, an example blend is investigated for its cooling performance and a general guide is proposed for selection of better performing laser cooling hosts. Furthermore, the cooling rate limits are discussed and three distinct characteristic times are identified with the photon-induced, phonon-assisted transition time controlling the rate. The metrics guide the selection of host materials for optimal cooling, and predict a noticeable increase in the absorption rate when using a blend of cation atoms.

Physical Review B•Mar 19, 2008•12 citations

Laser cooling with nanoparticles

Galina A. Nemova, Elton Soares de Lima Filho, Sébastien Loranger +1 more

Theoretical schemes for laser cooling with nanoparticles have been presented and comprehensively investigated. It is shown that specially designed samples based on nanoparticles can be used to improve the process of laser cooling of solids. One of the proposed schemes is based on lead salt colloidal quantum dots (QDs) doped in a glass host. The second one is based on Tm3+ doped oxy fluoride glass ceramic. It has been shown that lead salt colloidal QDs doped in a glass host can operate as artificial atoms. Very short (microsecond range) radiative lifetimes of the excited 1Sh level of PbSe QDs in comparison with the relatively long (millisecond) radiative lifetime of rare-earth (RE) ions allows the cooling process to be accelerated and to use new hosts with relatively high maximum phonon energy, which have so far been considered not suitable for cooling with RE ions. It has been shown that the second sample, which is based on Tm3+ doped oxy fluoride glass ceramic provides the unique combination of high chemical and mechanical stability of the oxide glass, which is important for a number of applications, and the low phonon energy of the fluoride nano-crystals, which trap a majority of Tm3+ ions participating in the cooling process. This is highly beneficial for laser cooling of solids, since the effective embedding of rare-earth ions in the crystalline phase with low phonon energy provides a high quantum efficiency for the 3F4 → 3H6 transition involved in the cooling cycle in the Tm3+ ions, which is a key parameter for laser cooling of solids.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 23, 2012•7 citations
The potential of three erbium based solids hosts has been investigated for laser cooling. Absorption and emission spectra have been studied for the low lying IR transitions of erbium that are relevant to recent reports of cooling using the 4I15/2-4I9/2 and4I15/2 -4I13/2 transitions. Experimental studies have been performed for erbium in three hosts; ZBLAN glass and KPb2Cl5 and Cs2NaYCl6 crystals. In order to estimate the efficiencies of cooling, theoretical calculations have been performed for the cubic Elpasolite (Cs2NaYCl6 ) crystal. These calculations also provide a first principle insight into the cooling efficiency for non-cubic and glassy hosts where such calculations are not possible.
Laser cooling of solids has many potential applications in communications, surveillance and medical science, etc. This paper reviews our recent work on laser refrigeration of solids in stoichiometric hexa-chloroelpasolite crystals with high concentrations of erbium. Our results are one to two orders of magnitude improvements over any previously reported cooling in erbium based materials. We have seen bulk crystal cooling by as low as 6 degrees Celsius below room temperature in elpasolite crystals. The high efficiency and low temperatures of cooling have been attributed to a high concentration of erbium, as high as 80% by formula, in the crystal. This cooling has been achieved by pumping near the IR transition at 870 nm which is the weakest transition of erbium. We report cooling in the 1.5 micron transition as well, using a diode laser to pump this transition. The result is cooling by only a fraction of a degree from room temperature.
For the first time, optical cooling has been observed in the (4)I(13/2) excited state of erbium(III), using the low phonon energy host materal, potassium lead chloride (KPb(2)Cl(2)). Cooling was observed when samples were pumped at wavelengths longer than 1557 nm, 17 nm longer than the mean fluorescence wavelength of 1540 nm, which implies a nonradiative heat load of 1.1% for the (4)I(13/2)-->(4)I(15/2) transition. When pumped at 1568 nm, the total cooling efficiency was 0.38% of the absorbed power. These results highlight the potential of Er(3+):KPb(2)Cl(5) as a material for lasers operating in an eye safe spectral region.
The cooling of solids via laser-excited anti-Stokes luminescence has reached the cryogenic regime and is now being considered for several applications that benefit from vibration-free cryogenic refrigeration. 4f-4f transitions in rare-earth-doped crystals with low phonon energies currently offer the best laser-cooling performance. These transitions, however, are electric-dipole (ED) forbidden and thus have low cross sections, limiting the minimum achievable temperatures in practical materials to the 50–100 K regime. In contrast, ED-allowed transitions may offer greater cross sections and potentially enable lower minimum temperatures or more compact devices. The search for laser cooling with ED-allowed transitions has been an active field of research over the past decades with a wide variety of materials having been studied. This paper reviews the fundamentals of solid-state laser cooling, provides a preliminary theoretical assessment showing that laser-cooling with ED-allowed transitions is in principle possible, and reviews the experimental results reported to date. While cooling with ED-allowed transitions has not yet been realized in the solid state, the existing experimental body of work along with the theoretical considerations presented here suggest that further research on this topic may be fruitful.
The recent achievements devoted to cooling of solids with a laser are presented in this paper. We discuss the latest results of traditional laser cooling of solids based on rare earth ions and new techniques based on colloidal lead-salt quantum dots doped in a glass host, laser cooling in Tm3+-doped oxy-fluoride glass ceramic. Relatively short (microsecond) lifetime of the excited level of the PbSe QDs compared to the millisecond lifetime of the excited level of RE ions allows an acceleration of the cooling process and provides an opportunity to use new materials with higher phonon energy as hosts, which are normally considered unsuitable for cooling with RE ions. Another new approach to the laser cooling problem based on super-radiance has been considered in this paper. The advantages of optical refrigeration with rare earth doped semiconductors, in which not only optically active electrons of the 4f shell but the valence and conduction bands of the host material are involved in cooling cycle is discussed. It is shown that involving the valence and conduction bands of the host in the cooling cycle allows the pump wavelength to be shorter than mean fluorescence wavelength. Raman laser cooling of solids as well as observation of spontaneous Brillouin cooling have been presented.
The material metrics for optimal laser cooling of ion-doped solids are derived using atomic and molecular dynamics properties of the constituents. The anti-Stokes process is modeled as an optical phonon coupling of the bound electron, followed by a photon absorption. The transition dipole moment is estimated using a simplified charge-displacement model and the Judd--Ofelt theory of rare-earth ions both suggesting that transitions with high-energy gaps and similar angular momentum states should be used. The electron-phonon coupling is interpreted as a derivative of electronic energy with respect to displacement of the nearest neighboring ligands whose stretching mode frequency is approximated using the molecular data. The Debye-Gaussian model is used for the phonon density of states of diatomic crystal. Then, the Fermi golden rule is used for photon-induced, phonon-assisted electronic transition probability and applied to the cooling rate equation by defining a phonon-assisted transition dipole moment. Based on the material metrics, an example blend is investigated for its cooling performance and a general guide is proposed for selection of better performing laser cooling hosts. Furthermore, the cooling rate limits are discussed and three distinct characteristic times are identified with the photon-induced, phonon-assisted transition time controlling the rate. The metrics guide the selection of host materials for optimal cooling, and predict a noticeable increase in the absorption rate when using a blend of cation atoms.
Theoretical schemes for laser cooling with nanoparticles have been presented and comprehensively investigated. It is shown that specially designed samples based on nanoparticles can be used to improve the process of laser cooling of solids. One of the proposed schemes is based on lead salt colloidal quantum dots (QDs) doped in a glass host. The second one is based on Tm3+ doped oxy fluoride glass ceramic. It has been shown that lead salt colloidal QDs doped in a glass host can operate as artificial atoms. Very short (microsecond range) radiative lifetimes of the excited 1Sh level of PbSe QDs in comparison with the relatively long (millisecond) radiative lifetime of rare-earth (RE) ions allows the cooling process to be accelerated and to use new hosts with relatively high maximum phonon energy, which have so far been considered not suitable for cooling with RE ions. It has been shown that the second sample, which is based on Tm3+ doped oxy fluoride glass ceramic provides the unique combination of high chemical and mechanical stability of the oxide glass, which is important for a number of applications, and the low phonon energy of the fluoride nano-crystals, which trap a majority of Tm3+ ions participating in the cooling process. This is highly beneficial for laser cooling of solids, since the effective embedding of rare-earth ions in the crystalline phase with low phonon energy provides a high quantum efficiency for the 3F4 → 3H6 transition involved in the cooling cycle in the Tm3+ ions, which is a key parameter for laser cooling of solids.