Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Highly efficient single-photon detection at communication wavelengths by use of upconversion in reverse-proton-exchanged periodically poled LiNbO_3 waveguides

Carsten Langrock, Eleni Diamanti, Rostislav V. Roussev, Y. Yamamoto, M. M. Fejer, Hiroki Takesue

Published Jul 1, 2005• 324 citations
Publisher

Abstract

Conventional single-photon detectors at communication wavelengths suffer from low quantum efficiencies and large dark counts. We present a single-photon detection system, operating at communication wavelengths, based on guided-wave frequency upconversion in a nonlinear crystal with an overall system detection efficiency (upconversion + detection) exceeding 46% at 1.56 microm. This system consists of a fiber-pigtailed reverse-proton-exchanged periodically poled LiNbO3 waveguide device in conjunction with a silicon-based single-photon counting module.

DOI
10.1364/ol.30.001725

Related papers

Highly efficient single-photon detection at communication wavelengths using upconversion in reverse proton exchanged PPLN waveguides

Carsten Langrock, Eleni Diamanti, Rostislav V. Roussev +3 more

We demonstrated single-photon detection at communication wavelengths with an overall system detection efficiency exceeding 46% using upconversion in a waveguide PPLN device in conjunction with a silicon-based single-photon counting module.

Quantum Electronics and Laser Science Conference•Dec 10, 2005•1 citation

Efficient and low-noise single-photon detection in 1550 nm communication band by frequency upconversion in periodically poled LiNbO_3 waveguides

Hidehiko Kamada, Masaki Asobe, Toshimori Honjo +5 more

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

Optics Letters•Mar 18, 2008•52 citations

Periodically poled lithium niobate waveguide sum-frequency generator for efficient single-photon detection at communication wavelengths

Rostislav V. Roussev, Carsten Langrock, Jonathan R. Kurz +1 more

We present a device to facilitate single-photon detection at communication wavelengths based on continuous-wave sum-frequency generation with an upconversion efficiency exceeding 90%. Sum-frequency generation in a periodically poled lithium niobate waveguide is used to upconvert signal photons to the near infrared, where detection can be performed efficiently by use of silicon avalanche photodiodes.

Optics Letters•Jul 1, 2004•189 citations

Low-noise PPLN-based single-photon detector

Xu Hai, Lijun Ma, Oliver Slattery +1 more

This paper describes the detection of single photons, which have been transmitted through standard fiber at the telecom wavelength of 1310 nm. Following transmission, the 1310-nm photon is up-converted to 710 nm in a periodical-poled LiNbO3 (PPLN) waveguide and then detected by a silicon-based avalanche photodiode (Si-APD). The overall detection efficiency of the detector is 20%. We have also characterized the sensitivity of the PPLN's efficiency to temperature and wavelength changes. We focused on the noise property of the up-conversion detector. Without classical channel co-propagation, the dark count rate is 2.2 kHz, which is lower than current up-conversion detectors by more than one order of magnitude. The up-conversion detector is then applied to a QKD system, which is characterized and is shown to have a very strong performance.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 9, 2007•13 citations

Upconversion single-photon detectors based on integrated periodically poled lithium niobate waveguides [Invited]

Fei Ma, Longyue Liang, Jiu-Peng Chen +6 more

We demonstrate upconversion single-photon detectors based on integrated periodically poled lithium niobate waveguides that incorporate two mode filters and a directional coupler. The two mode filters are optimized for the fiber-waveguide coupling efficiencies for 1550 and 1950 nm, respectively, while the directional coupler plays the role of wavelength combiner, making the overall system portable and low cost. The two wavelengths pump each other in our detection system. We achieve detection efficiencies of 28% for 1550 nm and 27% for 1950 nm, respectively. This scheme provides an efficient integrated single-photon detection method for any two well-separated spectral bands in the whole low-loss range of lithium niobate waveguides.

arXiv:1902.06464•Journal of the Optical Society of America B•Aug 7, 2018•24 citations

Long-wavelength-pumped upconversion single-photon detector at 1550 nm: performance and noise analysis

Jason S. Pelc, Long Ma, Christopher R. Phillips +5 more

We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.

Optics Express•Oct 17, 2011•246 citations
Conventional single-photon detectors at communication wavelengths suffer from low quantum efficiencies and large dark counts. We present a single-photon detection system, operating at communication wavelengths, based on guided-wave frequency upconversion in a nonlinear crystal with an overall system detection efficiency (upconversion + detection) exceeding 46% at 1.56 microm. This system consists of a fiber-pigtailed reverse-proton-exchanged periodically poled LiNbO3 waveguide device in conjunction with a silicon-based single-photon counting module.
We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).
This paper describes the detection of single photons, which have been transmitted through standard fiber at the telecom wavelength of 1310 nm. Following transmission, the 1310-nm photon is up-converted to 710 nm in a periodical-poled LiNbO3 (PPLN) waveguide and then detected by a silicon-based avalanche photodiode (Si-APD). The overall detection efficiency of the detector is 20%. We have also characterized the sensitivity of the PPLN's efficiency to temperature and wavelength changes. We focused on the noise property of the up-conversion detector. Without classical channel co-propagation, the dark count rate is 2.2 kHz, which is lower than current up-conversion detectors by more than one order of magnitude. The up-conversion detector is then applied to a QKD system, which is characterized and is shown to have a very strong performance.
We demonstrate upconversion single-photon detectors based on integrated periodically poled lithium niobate waveguides that incorporate two mode filters and a directional coupler. The two mode filters are optimized for the fiber-waveguide coupling efficiencies for 1550 and 1950 nm, respectively, while the directional coupler plays the role of wavelength combiner, making the overall system portable and low cost. The two wavelengths pump each other in our detection system. We achieve detection efficiencies of 28% for 1550 nm and 27% for 1950 nm, respectively. This scheme provides an efficient integrated single-photon detection method for any two well-separated spectral bands in the whole low-loss range of lithium niobate waveguides.
We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.