Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Binary AC Josephson system and bias current circuits at NIM

Zengmin Wang, Yuan Gao, Honghui Li

Published Jul 1, 2012• 4 citations
Publisher

Abstract

This paper reports the progress of binary Josephson system for precise ac waveform synthesis in National Institute of Metrology, China (NIM). We designed a 32-channel bias source for dynamic voltage synthesis up to 1 kHz with a programmable Josephson junction array. The latest design of output drive current has a rise-time less than 50 ns on 100 ohm resistant. The 32-channel bias source is able to simultaneously provide bias current for two 1-volt SINIS junction arrays to synthesis two synchronous AC voltages.

DOI
10.1109/cpem.2012.6251112

Related papers

Investigation of binary Josephson arrays for arbitrary waveform synthesis

Peter Kleinschmidt, P. Patel, Jonathan M. J. Williams +1 more

Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.

IEE Proceedings - Science Measurement and Technology•Nov 4, 2002•33 citations

Synthesis of Precision Waveforms Using a SINIS Josephson Junction Array

Ralf Behr, Jonathan M. J. Williams, P. Patel +3 more

A synthesizer of precision ac waveforms based on a binary superconductor insulator-normal metal-insulator-superconductor (SINIS) Josephson junction array has been developed. The array segments are individually biased using a high-speed bias source which gives a switching time of approximately 250 ns between voltage steps. The accuracy limitations of the system due to limited risetime and bandwidth are discussed. Comparisons between the synthesizer and a planar multijunction thermal converter (PMJTC) indicate that it is possible to synthesize sine waves with known rms value having an accuracy in the range of 1 part in 10/sup 7/.

IEEE Transactions on Instrumentation and Measurement•Mar 21, 2005•102 citations

One-Volt Josephson Arbitrary Waveform Synthesizer

Samuel P. Benz, Steven B. Waltman, Anna E. Fox +6 more

A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.

IEEE Transactions on Applied Superconductivity•Sep 17, 2014•59 citations

Arbitary waveform synthesis using binary Josephson arrays.

Peter Kleinschmidt, P. Patel, J M Williams +6 more

The Josephson primary DC voltage standard is very successful quantum standard. Recently it has become possible to divide Josephson arrays up into binary segments, thereby creating the possibility of developing a digital to analogue converter with quantum accuracy. These new arrays are based upon non-hysteretic Josephson junctions, which allow the voltage to be changed almost instantaneously. In this paper we will investigate the properties of two different types of Josephson arrays, one type is an intrinsically shunted array of junctions or so-called SINIS array, while the second type is externally shunted via small on-chip resistors. The arrays are biased using a purpose built computer controlled bias source discussed in a separate paper in this conference. We will discuss the accuracy of the generated voltage and investigate the ac properties.

•Jan 1, 2001•0 citations

Current Status of Josephson Arbitrary Waveform Synthesis at NMIJ/AIST

Nobu‐Hisa Kaneko, Michitaka Maruyama, Chiharu Urano

AC-waveform synthesis with quantum-mechanical accuracy has been attracting many researchers, especially metrologists in national metrology institutes, not only for its scientific interest but its potential benefit to industries. We describe the current status at National Metrology Institute of Japan of development of a Josephson arbitrary waveform synthesizer based on programmable and pulse-driven Josephson junction arrays.

IEICE Transactions on Electronics•Jan 1, 2011•11 citations

Josephson-based quantum voltage standards – an ongoing success story

Ralf Behr, Stephan Bauer, Marco Kraus +2 more

The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.

•Jan 1, 2025•0 citations
This paper reports the progress of binary Josephson system for precise ac waveform synthesis in National Institute of Metrology, China (NIM). We designed a 32-channel bias source for dynamic voltage synthesis up to 1 kHz with a programmable Josephson junction array. The latest design of output drive current has a rise-time less than 50 ns on 100 ohm resistant. The 32-channel bias source is able to simultaneously provide bias current for two 1-volt SINIS junction arrays to synthesis two synchronous AC voltages.
Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.
A synthesizer of precision ac waveforms based on a binary superconductor insulator-normal metal-insulator-superconductor (SINIS) Josephson junction array has been developed. The array segments are individually biased using a high-speed bias source which gives a switching time of approximately 250 ns between voltage steps. The accuracy limitations of the system due to limited risetime and bandwidth are discussed. Comparisons between the synthesizer and a planar multijunction thermal converter (PMJTC) indicate that it is possible to synthesize sine waves with known rms value having an accuracy in the range of 1 part in 10/sup 7/.
A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.
The Josephson primary DC voltage standard is very successful quantum standard. Recently it has become possible to divide Josephson arrays up into binary segments, thereby creating the possibility of developing a digital to analogue converter with quantum accuracy. These new arrays are based upon non-hysteretic Josephson junctions, which allow the voltage to be changed almost instantaneously. In this paper we will investigate the properties of two different types of Josephson arrays, one type is an intrinsically shunted array of junctions or so-called SINIS array, while the second type is externally shunted via small on-chip resistors. The arrays are biased using a purpose built computer controlled bias source discussed in a separate paper in this conference. We will discuss the accuracy of the generated voltage and investigate the ac properties.
The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.