Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Amplification of photon echo signals for photon-echo-based optical storage and optical processing devices

Ming Tian, N. Krishna Mohan, Ulf Elman, Baozhu Luo, Stefan Kröll

Published Nov 5, 1998• 2 citations
Publisher

Abstract

In photon-echo-based optical data storage and data processing the photon echo output intensity generally is about 0.1 - 1% of the input intensity. Many devices, such as processors would require that the photon echo output is used as an input to a new photon echo process. To obtain a sufficient signal-to- noise it would be necessary to first amplify the photon echo output signal. In this paper Pr-doped ZBLAN fibers are used to amplify the photon echo signals generated in Pr-doped Y2SiO5 at 606 nm. The fiber amplifier is pumped by the 476 nm output from an Ar-ion laser. Mirror-less lasing due to reflection at the fiber ends is eliminated by cleaving the fiber ends at an angle. The upper limit of the gain in a fiber is set by the core refractive index and the fiber numerical aperture. By changing from a fiber with numerical aperture of 0.4 to one with 0.15, the gain obtained at 606 nm is increased from 45 to 330.

DOI
10.1117/12.330413

Related papers

Amplification of photon echo signals by use of a fiber amplifier

Baozhu Luo, Ulf Elman, Stefan Kröll +2 more

The efficiency of photon-echo processes typically lies in the 0.1-1% range. For many photon-echo-based applications suggested in optical storage and all-optical communication the photon-echo output pulses would need to be used as input data to a new photon-echo process. In such cases amplification of the photon-echo output signals would be necessary for an acceptable signal-to-noise ratio to be obtained. We show that a Pr-doped ZBLAN fiber is able to produce significant amplification of photon-echo signals generated in Pr-doped Y(2)SiO(5) at 606 nm.

Optics Letters•Mar 15, 1998•13 citations

Amplification of photon echo signals using Pr:ZBLAN fiber

Baozhu Luo, Ulf Elman, Stefan Kröll +2 more

Summary form only given. Many photon-echo-based devices or processes, e.g., optical bit rate converters, routers, erasable memories, would require that the photon echo output be used as an input to a new photon echo process. This requires amplification of the photon echo output signal. We have demonstrated 45 times amplification of photon echo signals generated in Pr-doped Y/sub 2/SiO/sub 5/ at 606 nm in a Pr-doped ZBLAN fibre amplifier.

Conference on Lasers and Electro-Optics•Jan 1, 1998•0 citations

Regeneration of photon echoes with amplified photon echoes

R. Krishna Mohan, Ulf Elman, Ming Tian +1 more

Photon-echo-based devices have been proposed for many applications in data storage, image processing, and optical communications. Many of these applications would benefit if the output from the photon-echo process could be used as input in a second photon-echo process. We demonstrate the generation of such secondary echoes, using the amplified output from an initial photon-echo process. The amplification is performed with a Pr:ZBLAN fiber amplifier, which gives a gain of more than 300 at 606 nm when pumped with 320 mW of power at 476 nm.

Optics Letters•Jan 1, 1999•12 citations

Photon-Echoes in a Pumped Er-Doped Fiber

Valéria Loureiro da Silva, Yaron R. Silberberg

Recently we reported the first photon echo experiments in Er-doped fibers, and described their application to ultrafast time domain signal processing [1]. Our previous results were obtained with absorbing Er-doped fibers at 4°K, and our signals at 1.53µm were attenuated by the fiber. In this paper we report photon echo experiments with Er-doped amplifiers. We expect the photon echo process in amplifiers to yield strong echoes, perhaps stronger then the input signal. This could be important for signal processing applications. To our knowledge this is the first demonstration of photon echo in any inverted system.

Integrated Photonics Research•Jan 1, 1992•0 citations

"Analytical Model of Pulse Amplification in Erbium Doped Fiber Amplifier "

Nour. A. Naser, Muhammed. R. Harb, Hassan Abid Yasser

"Doping a part of the optical fiber core by (Er3+ ) ions in presence of external pumping power will lead to form the erbium-doped fiber amplifier (EDFA).The performance of this optical amplifier depends on (the power and the wavelength of the pumping laser, the power and wavelength of the input signal, amplifier length, ion concentration). These parameters will affect the characteristics of EDFA such as amplifier gain, gain saturation, noise figure and output power. However, these characteristics can be determined by solving the EDFA propagation and rate equations. The solution of these equations of two-level laser medium can be done numerically. In this paper, we are proposed a novel method to solve these equations. The reconstructed results are perfectly coincided the well known numerical results.

Muthanna Journal of Pure Science•Oct 14, 2020•0 citations

Output Photon Number Distribution of Erbium-Doped Fiber Amplifiers

G. Saplakoglu, M. CELIK

Erbium-doped fiber amplifiers (EDFA) are gaining increasing importance in the lightwave communications arena due mainly to their low insertion loss and easy manufacturability. Consequently there is significant motivation in obtaining the photon number distribution at the output of an EDFA taking finite bandwith and line shape of the signal lasers into account. In this paper the photon number distribution at the output of an EDFA resulting from an input wave packet having an arbitrary photon number distribution is evaluated. Previously the output photon number distribution was derived [1] for input fields having Poisson photon number distributions, i.e. for coherent sate input fields. Our treatment is more general in the sense that the input field can be in an arbitrary quantum sate. This generality will enable researchers to evaluate EDFA photon number distributions resulting from non-monochromatic incident fields [for example laser sources with phase and/or intensity noise] simply by using the appropriate input photon number distributions in the equations that will be derived below [see for example [2] for several photon number distributions corresponding to various laser line shapes].

Optical Amplifiers and Their Applications•Jan 1, 1992•2 citations
In photon-echo-based optical data storage and data processing the photon echo output intensity generally is about 0.1 - 1% of the input intensity. Many devices, such as processors would require that the photon echo output is used as an input to a new photon echo process. To obtain a sufficient signal-to- noise it would be necessary to first amplify the photon echo output signal. In this paper Pr-doped ZBLAN fibers are used to amplify the photon echo signals generated in Pr-doped Y2SiO5 at 606 nm. The fiber amplifier is pumped by the 476 nm output from an Ar-ion laser. Mirror-less lasing due to reflection at the fiber ends is eliminated by cleaving the fiber ends at an angle. The upper limit of the gain in a fiber is set by the core refractive index and the fiber numerical aperture. By changing from a fiber with numerical aperture of 0.4 to one with 0.15, the gain obtained at 606 nm is increased from 45 to 330.
The efficiency of photon-echo processes typically lies in the 0.1-1% range. For many photon-echo-based applications suggested in optical storage and all-optical communication the photon-echo output pulses would need to be used as input data to a new photon-echo process. In such cases amplification of the photon-echo output signals would be necessary for an acceptable signal-to-noise ratio to be obtained. We show that a Pr-doped ZBLAN fiber is able to produce significant amplification of photon-echo signals generated in Pr-doped Y(2)SiO(5) at 606 nm.
Photon-echo-based devices have been proposed for many applications in data storage, image processing, and optical communications. Many of these applications would benefit if the output from the photon-echo process could be used as input in a second photon-echo process. We demonstrate the generation of such secondary echoes, using the amplified output from an initial photon-echo process. The amplification is performed with a Pr:ZBLAN fiber amplifier, which gives a gain of more than 300 at 606 nm when pumped with 320 mW of power at 476 nm.
Recently we reported the first photon echo experiments in Er-doped fibers, and described their application to ultrafast time domain signal processing [1]. Our previous results were obtained with absorbing Er-doped fibers at 4°K, and our signals at 1.53µm were attenuated by the fiber. In this paper we report photon echo experiments with Er-doped amplifiers. We expect the photon echo process in amplifiers to yield strong echoes, perhaps stronger then the input signal. This could be important for signal processing applications. To our knowledge this is the first demonstration of photon echo in any inverted system.
"Doping a part of the optical fiber core by (Er3+ ) ions in presence of external pumping power will lead to form the erbium-doped fiber amplifier (EDFA).The performance of this optical amplifier depends on (the power and the wavelength of the pumping laser, the power and wavelength of the input signal, amplifier length, ion concentration). These parameters will affect the characteristics of EDFA such as amplifier gain, gain saturation, noise figure and output power. However, these characteristics can be determined by solving the EDFA propagation and rate equations. The solution of these equations of two-level laser medium can be done numerically. In this paper, we are proposed a novel method to solve these equations. The reconstructed results are perfectly coincided the well known numerical results.
Erbium-doped fiber amplifiers (EDFA) are gaining increasing importance in the lightwave communications arena due mainly to their low insertion loss and easy manufacturability. Consequently there is significant motivation in obtaining the photon number distribution at the output of an EDFA taking finite bandwith and line shape of the signal lasers into account. In this paper the photon number distribution at the output of an EDFA resulting from an input wave packet having an arbitrary photon number distribution is evaluated. Previously the output photon number distribution was derived [1] for input fields having Poisson photon number distributions, i.e. for coherent sate input fields. Our treatment is more general in the sense that the input field can be in an arbitrary quantum sate. This generality will enable researchers to evaluate EDFA photon number distributions resulting from non-monochromatic incident fields [for example laser sources with phase and/or intensity noise] simply by using the appropriate input photon number distributions in the equations that will be derived below [see for example [2] for several photon number distributions corresponding to various laser line shapes].