The goal of the LIGO project (as well as projects VIRGO and GEO-600) is to create terrestrial gravitational wave antennae which will detect bursts of gravitational radiation from astrophysical catastrophies. The sensitivity of the antennae to record the perturbations of the metric (the gravitational wave) has to be at such a level when the quantum behavior of macroscopic test masses (the key elements in the antennae) becomes essential. Therefore experimentalists have to invent and realize technologies which allow to reduce the decoherence of these test masses due to the heat bath and independently to create new methods of quantum measurements which will allow to beat certain limits of sensitivity (the so-called Standard Quantum Limits). These methods may be based on principles of Quantum-Non-Demolition measurements.
The goal of the LIGO project (as well as projects VIRGO and GEO-600) is to create terrestrial gravitational wave antennae which will detect bursts of gravitational radiation from astrophysical catastrophies. The sensitivity of the antennae to record the perturbations of the metric (the gravitational wave) has to be at such a level when the quantum behavior of macroscopic test masses (the key elements in the antennae) becomes essential. Therefore experimentalists have to invent and realize technologies which allow to reduce the decoherence of these test masses due to the heat bath and independently to create new methods of quantum measurements which will allow to beat certain limits of sensitivity (the so-called Standard Quantum Limits). These methods may be based on principles of Quantum-Non-Demolition measurements.
The 2015 seminal discovery of gravitational waves (GW) from the collision of the binary black holes has boosted interest to development of a more sensitive next generation gravitational-wave interferometers. As the current Advanced LIGO and Virgo detectors are limited by fundamental quantum fluctuations of light in the most of their detection band, the next generation of interferometers must use advanced quantum noise-mitigation methods and quantum non-demolition (QND) techniques to achieve the planned design sensitivity of 10 times better than the current detectors have. In this paper, we attempt to give an overview of some advanced quantum metrology techniques being considered as potential sensitivity boosters for the next generation GW detectors.
Future gravitational wave antennas will be approximately 100 kilogram cylinders, whose end-to-end vibrations must be measured so accurately (10 to the -19th power centimeters) that they behave quantum mechanically. Moreover, the vibration amplitude must be measured over and over again without perturbing it (quantum nondemolition measurement). This contrasts with quantum chemistry, quantum optics, or atomic, nuclear, and elementary particle physics where measurements are usually made on an ensemble of identical objects, and care is not given to whether any single object is perturbed or destroyed by the measurement. Electronic techniques required for quantum nondemolition measurements are described as well as the theory underlying them.
Since 2015, the gravitational-wave detectors LIGO and Virgo have opened a new window on the universe, detecting hundreds of signals and launching a new era of astronomy with profound impact on relativity, astrophysics, and cosmology. To listen deeper into the cosmos, detectors must become increasingly sensitive. One of the main limitations is quantum noise, ultimately arising from vacuum fluctuations entering the instrument. By “squeezing” this vacuum, i.e. manipulating its noise properties, LIGO and Virgo have already extended their reach by up to 65%, revealing events that would otherwise remain hidden. This article provides an overview of squeezing techniques for gravitational-wave detectors, from their origins to the most recent advances.
The fast progress in improving the sensitivity of the gravitational-wave detectors, we all have witnessed in the recent years, has propelled the scientific community to the point at which quantum behavior of such immense measurement devices as kilometer-long interferometers starts to matter. The time when their sensitivity will be mainly limited by the quantum noise of light is around the corner, and finding ways to reduce it will become a necessity. Therefore, the primary goal we pursued in this review was to familiarize a broad spectrum of readers with the theory of quantum measurements in the very form it finds application in the area of gravitational-wave detection. We focus on how quantum noise arises in gravitational-wave interferometers and what limitations it imposes on the achievable sensitivity. We start from the very basic concepts and gradually advance to the general linear quantum measurement theory and its application to the calculation of quantum noise in the contemporary and planned interferometric detectors of gravitational radiation of the first and second generation. Special attention is paid to the concept of the Standard Quantum Limit and the methods of its surmounting.
In recent years advances in technology, especially in the field of quantum optics, have made possible repetitive quantum measurements on a single quantum object, an issue that remained an academic curiosity until 25 years ago. This book, first published in 1992, provides a tutorial introduction to this field. The book is coauthored by an experimentalist and a theorist: the former - Braginsky - was the first experimentalist after Weber to develop techniques for gravitational-wave detection; the latter - Khalili - contributed with Braginsky to develop the formal apparatus to describe the experimental devices for measurement schemes. After the first part, intended as a pedagogical appendix of a standard textbook, and devoted to the modern approach to quantum measurement, the second part is a review of some new methods of quantum measurements for macroscopic objects. The central problem is the detection of a small time-dependent classical force that acts on a quantum probe. This is the typical situation that occurs in gravitational-wave detection, where the probe is a macroscopic moving mass weakly coupled to a classical wave. The problem of gravitational-wave detection and the limitation to accuracy of measurement of position of a moving mass - the so-called standard quantum limit (SQL), which is a consequence of the random back-action of the measuring device on the mass - triggered the development of new quantum nondemolition (QND) measurements, i.e. measurements where the measured quantity is left unperturbed after the measurement. SQL and QND measurements (both Braginsky inventions) permeate the whole book as a transversal chapter. The aim is to give simple criteria and recipes to design a measuring device in order to optimize the accuracy of the measurement, and, at the same time, to minimize the perturbation that the device exerts on the measured object, so that it will not interfere with successive measurements on the same object. The continuous measurements are regarded as the limiting case of a sequence of repeated discrete measurements, when the interval between the measurements is much smaller than the characteristic time-scale on which the measured quantity changes. The analysis of continuous measurements give to the authors the opportunity to illustrate the watchdog effect and the quantum Zeno paradox (real effect), while deriving the master equation for the evolution of the object state. Then, an entire chapter is devoted to the analysis of devices for continuous measurement of small mechanical displacements. The book is easy to understand, and can serve as a complementary reading for graduate level courses in quantum mechanics. The material of the book can be useful for all scientists and engineers involved in researches related to high-sensitive quantum measurements, quantum information theory and quantum computation. The reader, however, should be aware that this book presents a very particular point of view, with no room left to very relevant concepts in quantum measurement theory, as, for example, squeezing, quantum amplification, joint-measurements of non-commuting observables and phase-measurements. More regrettably, the list of references is unsatisfactorily incomplete, with no mention of alternative developments, for example, regarding the SQL for measuring the position of a free mass. Here, schemes to breach the SQL have been proposed in the literature (Yuen H P 1983 Phys. Rev. Lett. 51 719, Ozawa M 1988 Phys. Rev. Lett. 60 385), whereas from the book one could conclude that such SQL would be unsurpassable. Also, a criticism is in order of the way of deriving some SQL's, based solely on the Heisenberg relation, even in consideration that the aim of such derivations is mostly pedagogical.
Gravitational waves are a predication of Einstein's theory of general relativity. After nearly 50 years of effort by the scientific community to construct a detector capable of directly measuring gravitational waves, we expect a breakthrough, the first ever direct measurement of a gravitational wave within the next 5 years. The Advanced LIGO detectors currently under construction are predicted to achieve not only the first detection but to open the field of gravitational-wave astronomy: as an observational window on astrophysics and with an impart on other areas such as cosmology, strong-field gravity, general relativity, and nuclear physics. \n \nThe Advanced LIGO detectors are large-scale laser interferometers that have been designed for very low technical noise so that quantum noise will be limiting their sensitivity over a wide range of their spectrum. Planning for future gravitational wave observatories is already underway and reducing the fundamental quantum noise is considered to be one of the main experimental challenges. My work over the last 4 years has focused on possible new techniques to reduce or circumvent the quantum noise in laser interferometers. \n